Used Bevel Gear Lapping Machine for sale (69,422)

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W PRAWEMA 2006 SYNCHROFINE 205 HS Iiodsvm Efaepfx Apnsb

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm Isdpfxoyv Ipfj Apnoib total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Ijdsx R U Hmopfx Apnoib Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 26,583 h, functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, TECHNICAL DETAILS Workpiece diameter (max.): 130 mm Number of axes: X, Z, A, B, C (0–3) Electrical Power consumption: 47 kVA Voltage: 400 V Iedpowmc Idjfx Apnjib Frequency: 50 Hz

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. Iijdpfx Aoyvvlbjpnjb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm Iijdpsyfnlkofx Apnjb For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Ijdpfx Apsxupg Tsnjib See document

Condition: excellent (used), Year of construction: 1971, Max. diameter: 800mm Iedoy Ru D Sepfx Apneib Module: 10

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Iiodpfxjw Dcx Ro Apnob Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

Condition: ready for operation (used), LIEBHERR - LORENZ S800 / Gear Hobbing Machine - Well-maintained machine with extensive accessories - 1x pallet / change gears - 1x pallet / hobs - 1x pallet / arbors - DOCUMENTATION - Max. workpiece length with tailstock 600 mm - Max. workpiece length with retracted tailstock 800 mm - Max. traverse of milling slide 360 mm - Maximum pitch cut on largest workpiece 5 PI / in standard range 8 PI - Spindle taper – milling spindle MK 5 - Milling arbors 22 / 27 / 32 / 40 mm - Max. milling diameter 186 mm - Max. milling cutter length 170 mm Iisdpfx Apjyl Slhsnob - Max. cutter shift 80 mm - Milling speeds 40 – 220 rpm - Infinitely variable feed rates / horizontal - Infinitely variable feed rates / vertical - Infinitely variable feed rates / tangential - Clamping table without coolant trough 550 mm - Clamping table bore 100 mm - Arbor taper MK 5 Dimensions (LxWxH): 3.6 x 1.8 x 1.9 meters / Weight: 5,000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Ijdpewrh H Nofx Apneib Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm CBN * Iiodpfewh Dlmox Apneb

Condition: used, Year of construction: 1988, Technical details: max. wheel diameter: 210 mm total power requirement: 60 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,85 x 2,60 x 1,80 m grinding slide feed: 700 mm grinding slide feeds: 1-15.000 m/min max. workpiece weight: 150 kg centre height: 260 mm Iijdswrzutopfx Apneb grinding wheel diameter: 240 mm

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm max. module: 5 min. module: 1 weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,84 x 2,8 m min. number of teeth: 7 toolpiece turning speed range: 4000-10000 U/min tool length: 210 mm With tail stock No dressing device Only CBN * Ijdpfxswv Ug Re Apneib

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Iiodpfx Asgkwckepnjb

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Iijdpfx Apsw Al U Eenob

Condition: excellent (used), Max. Wheel Dia: 1600 mm Min. wheel Dia: 800 mm Gear width: 560 mm Max. module: 16 Iiodpfxjv Igc No Apneb Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Machine with change gear, arbors, fixtures set Machine is in excellent condition

Condition: good (used), functionality: fully functional, The Höfler Helix 400 gear grinding machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the profile grinding of gears. Special features: Ideal machine for one-off production and small batches Technical data Wheel diameter: 400 mm Module - max.: 0.75-10 Tooth width: 200 mm Iedpjvd Ehpsfx Apnjib Space requirement approx.: 3.0 x 4.5 x 2.5 mm Machine weight approx.: 8,500 kg *The illustration shows the machine in its current condition as a used machine and can be offered partially modernized or as a retrofit with new CNC control (Siemens ONE) and acceptance according to the manufacturer's standard on request.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Iijdpfxexvdryo Apneb Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Iiedewgm Sajpfx Apneb Weight 800 kg Tools

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Isdjr Elpvopfx Apneib Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: new, Delivery program Eifco hobbing machines Iijdou Egdljpfx Apneb

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert Iiedjw Dvanjpfx Apneb ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Isdexzfugepfx Apnsib

Condition: ready for operation (used), functionality: fully functional, Manufacturer: LORENZ Model: S8/630 Wheel diameter: 630 mm Wheel width: 180 mm Max. module: 8 Serial number: 12371 Power (kW): 10 Dimensions (L×W×H mm): 3000 × 2500 × 3500 Weight (kg): 5500 Max. workpiece diameter (mm): 630 Max. module: 8 Current condition: fully functional Iedpfoxakzpsx Apnjib