Used Broach (28411) for sale (208)

Year of construction: 1981, condition: used, machine/vehicle number: 142, Aumat M320 14873 Kst. 204/52 Operating voltage: 380 Voltage / 50 Hz Control voltage: 220 Voltage / 50 Hz Signalisation: 24 Voltage Perfomance: 15 KW / I: 40 A Circuit diagram: No. 142.006.3 Counter-pressure broaching slide: 20 - 30 bar Guide carriage: 40 - 45 bar Broaching compression: 13 - 90 Bar Counter-pressure guide carriage: 20 - 25 bar Vickers unit Order number: 626376 Wiring diagram number: 1420032 With chip conveyor Pgedpfxsc Swchj Aazjt Broaching stations: 3 With accessories

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Podpfxoxclfzs Aazjgt Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: ready for operation (used), A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible. Podpfxex Uq Twe Aazegt

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Pgjdjzdpvgopfx Aazot Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 1985, 32 mm Pjdewkvthopfx Aazsgt 12 mm stroke 330 mm pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition.

Condition: used, Year of construction: 1990, max.: tensile force 25,000 KG max.: tool length 3520 mm max.: cutting speed 9.6 m/min Passage width 520 mm The machine processes connecting rods and connecting rod caps. Pjdpocm Eiwefx Aazogt The machine is designed for mass production (output: 400 workpieces/hour).

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm table surface area 400x300 mm a lot of tools Pgsdpfx Aaey D A Dyjzjt

Condition: used, Year of construction: 1978, throat 1410 mm workpiece height max. 1150 mm stroke 1400 mm table diameter 1400 mm Podpsyqvgtofx Aazsgt milling-head swivable +/- 10 ram - range of adjustment 750 mm pulling power 50000 N workpiece weight 10000 kg Ram stroke speed 30 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces Pgodjv Rpnmepfx Aazst - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm Pedpfow Ny S Rsx Aazogt are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Year of construction: 1991, condition: ready for operation (used), Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible. Pedeu D Aagepfx Aazogt

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine No.: 1413 General / technical data: Used vertical hydraulic internal machining machine with up to 3 machining stations, in ready-to-use condition. Pulling force: 13000 KG (maximum) Pgjdodbmgmjpfx Aazet Machining length: 1200 mm Machining stations: 3 Distance between machining stations: 100 mm Mounting diameter for the draw head: Ø 85 mm Passage width between the cylinders: max. 390 mm Cutting speed: hydraulically continuously adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1150 x 1500 x 3725 mm (tool delivery system extended) Power supply / rated power: 380 V 50 Hz / 7.5 kW Accessories / special equipment: The machine's draw bridge has 3 tool holders for machining tools, and the workpiece table has 1 machining station (can be modified). The tool clamping system and the tool delivery system are designed for a spring-mechanical locking system (DIN 1415). The machine has an automatic tool delivery system, and the existing mount for the tool delivery system is also designed for only 1 tool (middle machining station). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production use with medium batch sizes. The machine has an automatic cycle. For use, a machine pit or, alternatively, a platform is ideally required. Draw heads, tool holders, and tools are available upon request. The machine can be inspected in our warehouse while powered up.

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW Pgedpfx Aoy Ty Afoazet weight of the machine ca. 1,5 t dimensions of the machine ca. 1x1x2,2 m

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Podev Rmvzspfx Aazogt Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Pgodpfxsfc T Eue Aazet Machine number: 1083 Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Year of construction: 2000, condition: used, machine/vehicle number: 3167, Broaching-force: 16 t Stroke: 16 t Podpfx Asccxqtsazegt Weight: 8,5 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Pgedpfx Aajwwkx Eozet Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 3.7 kW (5.03 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, Special Offer – 5% Discount Available! Metal Slotting Machine B5020 – 200 mm Stroke The Metal Technics Polska B5020 Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, large rotary table and automatic feeds ensure excellent machining accuracy, high productivity and reliable operation. The machine is ideal for tool rooms, maintenance departments and manufacturing facilities. With a maximum slotting force of 5 kN, a 200 mm ram stroke and a 360° rotary table, it is suitable for a wide range of precision machining applications. Main Features * 200 mm ram stroke * Heavy-duty industrial construction * Ø460 mm rotary table * Automatic longitudinal, cross and rotary feeds * Adjustable ram inclination * Maximum slotting force: 5 kN * High machining precision * CE certified Technical Specifications * Model: B5020 * Maximum ram stroke: 200 mm * Stroke speeds: 32 / 50 / 80 / 125 strokes/min * Ram inclination: 0°–8° * Vertical ram adjustment: 200 mm * Table diameter: 460 mm * Maximum table load: 400 kg * Longitudinal table travel: 420 mm * Cross table travel: 420 mm * Table rotation: 360° * Maximum tool size: 25 × 40 mm * Maximum slotting force: 5 kN * Main motor power: 3 kW * Feed motor power: 0.7 kW * Machine dimensions: 1717 × 1221 × 1885 mm * Machine weight: 2200 kg Applications * Keyway machining * Internal splines * Internal grooves * Slotting operations * Tool rooms * Maintenance workshops * Metalworking * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation, warranty and professional after-sales support. Spare parts are readily available. Psdpfx Aaezf Huiezsgt We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. Podpfoz Dpcqex Aazjgt For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 290 kg, power: 0.37 kW (0.50 HP), input voltage: 400 V, total length: 800 mm, total width: 750 mm, total height: 1,550 mm, feed length X-axis: 220 mm, feed length Y-axis: 220 mm, feed length Z-axis: 200 mm, grinding spindle motor power: 370 W, Special Offer – 5% Discount Available! Slotting Machine The Slotting Machine is a compact and reliable machine designed for precision slotting, keyway cutting, internal profiling and shaping operations. Its rigid construction and adjustable stroke make it an ideal solution for tool rooms, maintenance workshops and metalworking facilities. The machine features a rotating head with a 90° swivel, allowing greater flexibility when machining complex workpieces. With six selectable stroke speeds and a maximum stroke length of 125 mm, it delivers accurate and efficient machining for a wide range of applications. The robust construction ensures excellent stability and precision while maintaining low operating costs. The machine is suitable for both repair work and small-batch production. Main Features * Heavy-duty construction * Adjustable stroke * Six stroke speed settings * 90° swivelling head * High machining accuracy * Compact design * Easy operation * CE certified Technical Specifications * Maximum stroke: 125 mm * Stroke speed: 60–350 strokes/min * Number of speed steps: 6 Pgsdpoyux E Hofx Aazjt * Head rotation: 90° * Table size: 500 × 200 mm * Table travel (X/Y): 220 mm * Z-axis travel: 200 mm * Motor power: 0.37 kW * Tool shank diameter: Ø10 / Ø16 mm * Machine dimensions: 800 × 750 × 1550 mm * Machine weight: 290 kg Applications * Slotting * Keyway machining * Internal profiling * Shaping operations * Tool rooms * Maintenance workshops * Metalworking * Small-batch production Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,900 mm, total height: 1,500 mm, total width: 1,600 mm, type of input current: three-phase, For sale is a Maqford BEA2 forming machine. Working length 150-1500mm, sheet thickness max. 2.0mm, pipe diameter 120-600mm. Including a set of packages for individual diameters. Psdpfx Aaowmniajzsgt

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Psdpstz S Hcsfx Aazjgt Stroke 500mm, 320mm and 200mm

Condition: good (used), Year of construction: 1995, 1 used hydraulic CNC keyway broaching machine Manufacturer: Leistritz Pgedjy I R N Sopfx Aazjt Model: Polymat 50/400 Year of manufacture: 1995 CNC keyway width: 50 mm Maximum stroke: 400 mm Bore diameter: 10–350 mm Pulling force: 15.9 kN Max. workpiece outside diameter: 500 mm Table size: 550 x 675 mm Cutting speed: 20 m/min Return speed: up to 40 m/min Machine weight: approx. 1,400 kg

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) Peded Nb A Nopfx Aazsgt machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Pjdpfocdtplsx Aazogt Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor