Used Cayex Sawdust Extractor for sale (892)

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h -Extraction arm: O 160 mm x 4200 mm Dwedpfx Aohmqm Iol Ssc -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Dodpfs E Dqujx Al Sjwc Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter Dwodpfjmv Ekyox Al Sec feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: used, Year of construction: 1999, functionality: fully functional, USED AUTOMATIC BAND SAW, BIANCO 320, BTM 42-32, BUNDLE CUTTING UP TO 250x250 WITH CHIP EXTRACTOR, fully refurbished. TECHNICAL DATA: Cutting capacity at 90° round mm. 320 Cutting capacity at 90° square mm. 320 Cutting capacity at 90° rectangular mm. 320-420 Cutting capacity at 90° bundle mm. 250-250 Standard blade speed (variable) m/min. 12 - 115 Bar feed (single stroke) mm. 500 Main motor power KW 2.2 Dwedpfjzhul Uox Al Ssc Hydraulic pump motor power KW 1.5 Coolant pump motor power KW 0.2 Chip extractor motor power KW 0.18 Blade dimensions mm. 5300 x 34 x 1.1 Coolant tank L. 100 Hydraulic unit tank L. 25 Worktable height mm. 830 Machine dimensions mm. 1910 x 3250 x 2100h Net weight Kg. 2300 Accessories: paddle chip extractor, automatic hydraulic bundle cutting up to 250x250

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology Dodpfjvu Aprox Al Sjwc The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Dwjdpoz A Tl Tsfx Al Soc Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Dsdjudav Nopfx Al Sewc Precision and Work Efficiency Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Technical Specifications Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, Dedpjuc U N Uefx Al Sjwc panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, DCV11300 TC VIBER The DCV11300 TC VIBER is a high-performance industrial dust extraction unit designed for operation under demanding conditions in the woodworking and furniture industries. Equipped with advanced filtration, safety and energy recovery systems, it guarantees reliability, cleanliness and cost efficiency in every production facility. Dwjdpeudalwjfx Al Ssc Main Advantages of the Machine Extraction capacity of 11,300 m³/h – effective removal of chips, dust and sawdust from multiple workstations. VIBER system – automatic, trouble-free filter shaking ensuring constant operating parameters. DAMAGE PROTECT module – mechanical protection of the impeller against damage caused by solid contaminants. TC housing – effective acoustic insulation and vibration reduction. REHEAT system – recovery of heat from the extracted air for energy savings. Construction and Technology The DCV11300 TC VIBER central dust extraction unit has been designed for many years of trouble-free operation. The heart of the system is an 11 kW motor with a dynamically balanced impeller, ensuring stable and quiet operation. The construction is based on a rigid steel frame with additional inspection doors, making operation and bag replacement easier. Precision and Work Efficiency The high suction velocity of 28–32 m/s and 64 polyester filters (5 microns) ensure effective air purification even in intensively operated facilities. The BIG-BAG system or metal containers on wheels allow for efficient waste removal. Application The DCV11300 TC VIBER is an ideal woodworking dust extraction unit for facilities: producing furniture and wooden components, with multiple workstations, using panel saws, edgebanders, sanders and saws, looking for a central solution (central dust extraction system). Standard Equipment Control cabinet with easy access, Complete set of polyester filters, VIBER system with an automatic cycle, TC sound-absorbing housing, REHEAT and DAMAGE PROTECT modules. Technical Specifications Power supply voltage — 400 V Motor power — 11 kW Rotational speed — 3000 rpm Capacity — 11,300 m³/h Negative pressure — 3000 Pa Noise level — 80 dB Inlet / outlet diameter — 350 mm / 500 mm Filter material — Polyester, 5 microns / filter category "G" Number of filters — 64 pcs. Filter dimensions — Φ160 × 960 mm Overall dimensions — 1190 × 3160 × 2320 mm Net weight — 710 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Dust Extraction System for Cabinet Sandblasting Machines The dust extraction system for cabinet sandblasting machines is a specialised extraction unit designed to improve visibility, cleanliness, and workplace safety during abrasive blasting operations. Equipped with a built-in 1100 W motor and an efficient filtration system, the unit ensures effective removal of contaminants from the working area. It is an essential component of every sandblasting cabinet, especially when used intensively in industrial environments. Main Advantages of the Machine 1100 W motor – provides high extraction performance while maintaining the unit's compact dimensions. Capacity of 3 m³/min – effectively removes dust and improves visibility inside the cabinet during operation. High-efficiency filter – captures fine dust particles, helping to protect the operator's health and improve the quality of the working environment. Stable construction – designed for operation with large sandblasting cabinets. Compact dimensions – allow easy installation near the cabinet, even where space is limited. Construction and Technology The extractor is equipped with an efficient 230 V/50 Hz electric motor that generates a stable extraction airflow, essential during intensive sandblasting operations. The unit's housing is made of durable materials resistant to industrial conditions. The 310 x 170 mm filter effectively captures even fine dust particles, preventing them from being re-suspended in the air. The 52 mm inlet diameter ensures compatibility with most sandblasting cabinets. Precision and Work Efficiency Thanks to its high-efficiency filtration system, the extractor eliminates excessive dust accumulation inside the cabinet, which directly improves the precision of the abrasive blasting process. Improved visibility allows for more accurate cleaning of components and reduces processing time. Reducing the amount of airborne dust also helps extend the service life of other cabinet components, such as lighting systems and door seals. Dsdpforh E Azjx Al Sjwc Applications The unit is recommended for use with sandblasting cabinets featuring a large working area, where significant amounts of dust are generated. It is suitable for repair workshops, metalworking shops, and industrial production facilities where regular sandblasting requires clean air to be maintained. The extractor is compatible with most cabinet sandblasting machine models; however, attention should be paid to the different mounting-hole spacing used on the KDP200, KDP200TOP, and KDP220TOP models. Standard Equipment Integrated 230 V electric motor High-efficiency filtration system Housing with wall-mounting bracket 52 mm diameter inlet Technical Specifications Specification Value Extraction power 1100 W Capacity 3 m³/min Power supply 230 V / 50 Hz Noise level 85 dB Inlet diameter 52 mm Handle length 280 mm Extractor dimensions (height × diameter) 730 × 260 mm Filter dimensions (height × diameter) 310 × 170 mm Weight 9.5 kg

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm Dwsdpfjtt Da Iex Al Sjc MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Dsdpfx Aozvcapsl Sjwc Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Dodpfxjh Ucqtj Al Sswc Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / Dsdpsz Dun Ejfx Al Sewc 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor Dwsdpfx Alou Habme Sec - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] Dsdoxur E Sopfx Al Sswc - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA Dwsdpfjzw Dbkjx Al Soc - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, machine/vehicle number: 0940, without hall piping Dwsdpfx Aorz Iq Hel Ssc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. Dedpfxozy R Rdj Al Sjwc - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: excellent (used), Year of construction: 2007, operating hours: 1,192 h, functionality: fully functional, machine/vehicle number: 1541, total width: 2,000 mm, total height: 2,500 mm, total length: 25,000 mm, briquette diameter: 90 mm, overall weight: 6,000 kg, Equipment: CE marking, type plate available, Complete production line for cylindrical briquettes, Ø 90 mm. The line includes a Di Più BRIK MB90 briquetting press, an input sawdust conveyor, a briquette cooling tower, a briquette cutter, a briquette sorting conveyor, a shrinking tunnel (packaging machine), and an output roller conveyor. Dodpjy U D Uusfx Al Sowc

Condition: ready for operation (used), Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation. Dedpfoiquuvex Al Sowc

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 3 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW WATERPROOF HOIST CONTAINER WITH FIXED ROOF FOR SAWDUST AND SINGLE REAR DOOR WITH VENTS, FLOOR SUPPORTED BY 200 MM BEAMS AND SIDE INSPECTION SPYHOLE REF: 23-N-29 TYPE: for fine dust/sawdust C NEW: yes LID: yes OPENING: single door OVERALL DIMENSIONS TOTAL LENGTH: 6.25 m EXTERNAL WIDTH OF THE BODY: 2.50 m HEIGHT: 2.65 m MC: 30 WEIGHT: 2730 BOTTOM: 4 mm WALL: 3 mm COLOUR: greyThe prices shown do not include VAT. please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. Dwjdpjvm Ep Sefx Al Soc With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS Dwsdpfoz I Tm Usx Al Soc The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Dwsdszpd Aljpfx Al Ssc Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: new, Year of construction: 2026, functionality: fully functional, New Cursal log splitting line for firewood – available IMMEDIATELY, instead of a 6-month lead time. A new TRV 1600L 700 ordered today directly from Cursal s.r.l. currently has a manufacturing lead time of 5 and a half to 6 months. This specific line, ordered in February 2026, is nearing completion and will be available immediately, ex-works from the Cursal factory in San Fior, Italy. Same price as a new order from the factory: €59,590, but without the 6-month wait. For a firewood producer, this means the line can be operational before the next winter season, rather than after. We ordered this line for our own production, but a change in our manufacturing process means it no longer fits our needs. It has never been delivered, installed, or operated outside the factory. * Full 12-month manufacturer's warranty from the date of delivery * CE certification * Collection directly ex-works in Italy, avoiding double transport * User manual and video tutorial included – over 90% of these machines are installed by the customers themselves * Optional installation by a Cursal technician available for approximately €2,250 ### Scope of supply Cursal order confirmation no. 2-01407/26 #### 1 × CURSAL TRV 1600L 700 Log splitting saw for bulk-loaded firewood of varying lengths * 15 HP blade motor with automatic braking and computer-controlled cutting * Adjustable cutting time from 0.6 to 2 seconds * Pneumatic blade movement * Piece length at entry: from 500 to 6,000 mm * Programmable cutting length: from 100 to 750 mm * Maximum cutting height at the blade center: 200 mm * Maximum width at the base: 520 mm * Feed speed up to 50 m/min * Variable speed motor * Pneumatic press with 6 independent toothed elements * Press stroke: 250 mm * 2 sawdust extraction ducts of Ø 100 to 140 mm * Complete side guards * Dimensions: 2,500 × 1,200 × 2,050 mm #### 1 × RAMM 4000 × 710 Motorized roller feed conveyor * 0.75 HP motor * Variable speed from 5 to 50 m/min * Galvanized rollers Ø 76 mm * Roller pitch: 125/250 mm * Capacity: 420 kg per roller * Lateral retaining barriers * Length: 4,000 mm #### 1 × HM 700-40-80 Widia® blade * Diameter: 700 mm * Bore: 40 mm * Number of teeth: Z 80/84 ### Power supply Dwodpfx Aszm Twysl Ssc * Electrical power supply: 400 V three-phase / 50 Hz * Protection rating: IP54 * Compressed air: 7 bar Ideal machine for firewood producers, sawmills, and biomass plants. With the winter demand approaching, this is the only opportunity to have a new, operational Cursal line available this season. Location: ex-works Cursal, San Fior (TV), Italy. Delivery can be arranged.