Used Escherich Distributor for sale (388)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO Nsdszvcknjpfx Abuown • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D Nwjdpfxjztfwlo Abusn rolling power 800 kn diameter max. Werkstück: 250 mm work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm width 2600 mm height 2600 mm weight 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length Nodpsz I Tm Isfx Abuown The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: used, mileage: 34,260 km, power: 59 kW (80.22 HP), first registration: 07/1964, fuel type: gasoline, color: green, driver cabin: other, gearing type: mechanical, number of seats: 2, Year of construction: 1964, Equipment: all wheel drive, Vehicle location: Bovenden, Color: green Fabric: gray Nedpfovhi Twox Abuswn soft top: green U82 (main series) Start and drive with a brand new engine that has now covered 350 km. The engine must therefore be run in further. The renewed parts include: New engine block, batteries, ignition coil, spark plugs, spark plug wires, distributor cap, hood, windshield wipers, headlight grille, fuses, horn, mirrors, seats, snorkel, engine washer, throttle cable, lights, switch plate, leather protection gearshift, 2x front tires, 5 inner tires, brake shoes front and rear, brake cylinders front and rear, complete exhaust, gearbox rubbers renewed, handbrake rubbers, fuel tank, blind spot blades, special stainless steel lock for battery box, oil, coolant, brake fluid, grease, oil filter, fuel filter and several new loose parts are still available as spare parts. Primed twice and painted twice. The front floor still needs to be painted, then it's just a matter of sticking with it. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. Nsdpfx Aozvn Thebuswn For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. Nwjdpfx Abo Afwnvjuon You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 57 running meters Nwsds Afwn Sopfx Abujn Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: Njdpfx Aey Edlbobuswn A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: used, mileage: 73,639 km, power: 115 kW (156.36 HP), first registration: 11/2010, fuel type: diesel, overall weight: 9,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro5, loading space volume: 4 m³, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Year of construction: 2010, Equipment: ABS, electronic stability program (ESP), Well-maintained Atego MB 816 three-way tipper truck Special equipment: Trailer brake, 2-line; trailer coupling: towing hitch; trailer coupling: central axle trailer G 250; trailer socket 24V / 15-pin; audio system: CD radio; transmission: 6-speed - type: G 60-6; graphics information display with eco-meter; hydraulic pump (Meiller pump - 5 pistons - 254 / 1); engine start/stop system; spare wheel holder behind the rear axle; rear window; seats in the cab: middle seat with seatbelt; socket in the cab, 24V; crossmember for trailer coupling Additional equipment: Nwjdpfx Aozu H Emobuen Emissions standard EURO 5; axle configuration: 4x2; exterior mirrors, electrically adjustable and heated; battery 115 Ah; cockpit distributor; roof hatch (steel); differential lock, rear axle; cab: S (short); suspension: leaf spring / leaf spring; generator 80 A; urea tank (AdBlue): 25 liters; urea tank (AdBlue): plastic; rear axle H 2, crown wheel 325; interior filter: pollen filter; body/superstructure: tipper; fuel tank: 105 liters; Atego 2 model upgrade; engine 4.3 liters - 115 kW diesel (OM 904 LA); engine brake with constant throttle; auxiliary drive MB 1C; wheelbase 3020 mm; disc brakes; side impact protection; seats in the cab: single passenger seat, fixed; seats in the cab: driver's seat, standard suspension seat; steel rims 6.75x17.5; underrun protection, fixed, rear; underrun protection, front; immobilizer; permitted total weight 9.50 t Tire condition, front axle approx.: 60%; rear axle approx.: 50% Errors and prior sale excepted!

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. Nwsdpfx Abj Afwnzeuon - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum Nsdpfx Aboffphceuewn -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP Nsdsz Ebnhopfx Abujwn BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg Nedpfxsffphbj Abuown

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Nwsdo Adz R Hspfx Abujn Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm Nwodew Sguwspfx Abuon - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmitz Cargobull SPL 24/L-13.62EB Platform Trailer * Platform semi-trailer * Front wall, 1,200 mm * 12 container locking devices / twist locks: 1 x 40 ft, 2 x 20 ft and 1 x 20 ft * Continuous lashing points in the outer frame * 4 extendable warning signs with position lights * Longitudinal beam height at the front: 156 mm, at the rear: 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pole DIN ISO3731+DIN ISO1185+ ISO12098 * 8 pcs. additional lashing beam pockets in the center of the 8 t floor, for lashing beam 70/70 * 8 pairs of additional lashing beam pockets with lashing beam securing in the outer frame for lashing beam 70/70 * Strength per additional lashing beam: up to 400 kg at a height of 1 meter * 1 row of lashing beam pockets 70x70 across the load securing, approx. 2600 mm in front of the front wall * Open storage box on top for additional lashing beams * Lashing points: 16 pairs, 4 tons tensile force per eye, according to EN 12640 * 28 mm plate floor, max. 8000 kg forklift axle load, strength test according to DIN EN 283 Njdpfx Abot Dhfmjuewn * Air suspension * Air control system * Lift axle * Disc brakes Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and thus does not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system Njdpjyrgq Ejfx Abuswn • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (on Tel. ...). DMS RL70120 Rotator Bucket / incl. Rotator / MS03 Mount / NEW item / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Weight: 217 kg - Cutting width: 1,200 mm - Volume: 220 l - Max. output speed: 9 – 10 rpm - Max. torque: 6,960 Nm - Recommended oil flow (rotation): 35 – 45 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 4 – 7 tons Optional: - MS03 Mount: €560.00 net Nedpfjyxadaex Abuewn - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. ...) is at your service. Upon request, we are happy to provide you with a financing offer. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for Magni telehandlers. We are an official distributor and service partner for JCB construction machinery. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete DMS product range! Subject to errors and prior sale. = Further information = New: Yes Intended use: Construction Empty weight: 217 kg Contact Marius Herden for more information.

Condition: used, mileage: 452,537 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: semi-automatic, emission class: euro5, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, soot filter, Mercedes-Benz 1624 Atego Flatbed + Amco Veba Crane 4x2 Suspension: Leaf-air Wheelbase: 4.50 m Payload: 6,830 kg Amco Veba Crane Model: V815 3S 4x hydraulic extensions 2x hydraulic stabilizers 1x remote control 5th and 6th control units Special features: - Storage compartment on engine tunnel - Audio system: CD radio - Electric windows - Urea (AdBlue) tank: 35 liters - Rear lights for mounting tail lift - Fuel tank: 180 liters, plastic - Roof air deflector - Mercedes-Benz PTO 2C - Mercedes-Benz PTO 60-2C with MPA - Programmable special module - Frame extension – rear overhang - Side-mounted spare wheel carrier - Reverse warning buzzer (external alarm) - Cab seats: Comfort driver's suspension seat - Rear mudguards with splash guards - Heat-insulating glazing Additional equipment: - Axle configuration: 4x2 - Electrically adjustable and heated exterior mirrors - 115 Ah battery - Cockpit distributor - Roof hatch (steel) - Cab: S (short) - Suspension: leaf/air - 80 A alternator - 6-speed gearbox - Type: G 60-6 - Urea (AdBlue) tank: plastic - Rear axle: H 4, ring gear 368 - LS 6 / LS 8 power steering - Interior filter: pollen filter - Body/chassis: chassis frame - Atego 2 model update - Engine: 6.4 liters – 175 kW diesel (OM 906 LA) - Engine start/stop system - Engine brake with constant throttle Nodpfx Aboy Hyp Seuewn - Wheelbase: 4760 mm - Disc brakes - SCR system (AdBlue technology) - Side underrun protection - Cab seats: fixed single passenger seat - Rear axle stabilizer - Fixed rear underrun protection - Front underrun protection - Immobilizer - Perm. gross vehicle weight: 16.00 t We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: Nwsdpfxjzz Sikj Abujn 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: used, functionality: fully functional, Year of construction: 2020, Manure spreader with short disc harrow, Volmer T Rubber TRG-W8000, year of manufacture 2020, nominal width 7500 mm, 60 toothed discs 510 mm, 2x16 manure distributors Agrar Pro with 50 mm hose diameter, 10 bar pressure hoses, nitrogen bladder for spring mechanism, 3-point linkage, edge disc 430 mm, side plate on the right, pipe roller 550 mm, hydraulically foldable, warning sign with LED lighting, serial number 090804155. Njdpfx Aez Hwvkjbuswn

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2650207, travel distance X-axis: 300 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828d, total height: 2,360 mm, total length: 2,020 mm, total width: 1,000 mm, table width: 260 mm, table length: 560 mm, table load: 150 kg, rotational speed (max.): 20,000 rpm, overall weight: 2,180 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 5,500 W, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 16, tool length: 200 mm, tool diameter: 63 mm, tool weight: 3,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, SYIL X5 CNC Vertical Machining Center – New Machine Compact CNC vertical machining center, designed for precision machining of single parts as well as for small and medium-sized production runs. Equipment: Nsdpfx Abez Eh E Tjuswn Schneeberger mineral cast chassis Siemens SINUMERIK 828D CNC control THK linear guides and ball screws BT30 spindle, 20,000 rpm 16-tool automatic tool changer Coolant system Automatic centralized lubrication Fully enclosed work enclosure Work area lighting New machine, available in stock, selling price CHF 43,900 (excluding VAT) The machine can be viewed and tested in our showroom in Le Locle, Switzerland. Commissioning, training, and after-sales service are provided directly by Swiss Machines Tools, the SYIL distributor in Switzerland. Please contact us for detailed technical specifications, available equipment, and options.

Condition: used, Year of construction: 2022, OVERVIEW his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in stainless steel with transparent safety guarding and is operated via a Weintek HMI terminal. The observed configuration includes label reel support discs, internal label dispensing heads, bottle guiding elements, timing screw and conveyor system. TECHNICAL DATA - Manufacturer: TB Ingeniería / TecnoBodega Ingeniería - Model: C1EL - Machine Type: Self-adhesive labelling and capsule machine - Year of Manufacture: 2022 - Number of Labelling Heads: 3 Nsdpozdya Njfx Abujwn - Labelling Formats: Front label, back label and tax stamp - Label Type: Paper self-adhesive labels - Production Capacity: approx. 1,000 – 1,500 bottles/hour - Capacity for Shrink Capsules: up to approx. 2,000 bottles/hour on Bordeaux bottles Ø76 mm - Bottle Height Range: 140 – 370 mm - Bottle Diameter Range: 50 – 100 mm - Core / Mandrel Diameter: min. 76 mm - Maximum Reel Diameter: 250 mm - Label Length Range: 40 – 105 mm - Label Height Range: 18 – 150 mm - Control Interface: Weintek HMI terminal - Included Components: Bottle conveyor, infeed timing screw, self-adhesive labelling heads with independent feed, capsule distributor, capsule application unit - Included Features: Automatic speed regulation according to bottle flow, machine protection and safety systems, compact line integration - Construction: Stainless steel frame with transparent safety doors - Safety: Emergency stop, safety guarding and warning labels - Condition: Used, installed in production environment

Condition: excellent (used), Year of construction: 2001, operating hours: 1,941 h, Equipment: cabin, FENDT 716 Tractor YEAR 2001 1941.8 mtg, VARIO BOX SUSPENDED CAB Nsdoukq Nzopfx Abuown SUSPENDED FRONT AXLE WITH FRONT LINKAGE FRONT PTO HYDRAULIC AND PNEUMATIC BRAKING 4 REAR HYDRAULIC DISTRIBUTORS 1 FRONT DISTRIBUTOR WHEELS 540/65 R 38 AND 540/65 R 28 + NARROW WHEELS 900/95 R 46 AND 270/95 R 32

Condition: good (used), Year of construction: 2013, functionality: fully functional, 5-axis CNC grinding machine - Solution Line control system - Direct drive on all linear axes - Direct drive in all rotary axes - Direct path measuring systems in the X, Y, and Z axes - Automatic 5-position grinding wheel changer with its own NC drive for grinding wheels and Nsdpszcch Isfx Abuswn coolant distributor, with collision monitoring - Central lubrication Further details available upon request.