Used Froma Mesh Welding Line for sale (14,619)

Condition: used, Year of construction: 2026, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Grey The price does not include accessories. - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dcjdpfjynz Dfex Ac Neg Lukas van Rossum

Condition: used, Year of construction: 2026, total height: 600 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Grey Welding table / Clamping table * Drilled holes! * Diagonal grid! Dimensions: 3000x1500mm Table-thickness: 15mm Hole-diameter: 28mm Dcsdpfx Acjynzy Ho Nog Extras at extra cost - 4x 3D Angle 300mm - 6x Stop 150mm - 6x Stop 225mm - 1x Protractor  - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Transport dimensions: 2400mm x 1200mm x 600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1996, operating hours: 12,171 h, Colour: Grey BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: No - Bottom sander: - CE certificate present: No - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Sanding pad present: No - Top sander: - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Structuring brush present: No - Sanding pad present: No - Voltage [V]: 380 - Current consumption [A]: 172 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dsdpfx Acewnh Eqj Necg Yorick Diebels

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Dcedox Dkk Sopfx Ac Neg Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Serial no. - WO1221. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Serial no. - 960231. Date of manufacture – 2008. Dcodpfx Aoy Hlw Ijc Nsg Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Model of VFFS bagger – GV2K1. Serial number - GV021202. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Dcjdoy Hlkbopfx Ac Nsg Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line Message Display , 31k Memory, unused in opened original box, 100% functional Dcedpfx Acsi D Tzhe Nsg

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Dcsdpfoi Eblaox Ac Nsg

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Dcodpfxoyxd D Rj Ac Njg Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Internal pressure: 87 PSI Material of Construction: glass lined

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Dcsdpfxey Naq Ij Ac Njg Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Maximum Pressing Length up to 4,500m/m. Semi Automatic Single Sided Finger Joint Milling Unit with Cut off Saw, Scoring Saw & Milling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued section. Show us your mobile number for images on WhatsApp. Dedpfx Aouaf Rdoc Nscg Can be demo'd working in Sheffield, Yorkshire UK. Full documentation available. Photos & Video etc, available on Whats App. Price ex. works, dismantled & loaded buyers transport: £28,500.00 + Vat if applicable, or Euro 32,000.00

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Dcodpfx Aceu Tg Nns Nsg Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Dcedju Tg I Depfx Ac Nog Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Dcodoy Inwgopfx Ac Njg Rated power 2.4 KVA 380 Volt

Condition: used, Year of construction: 1997, CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location : Use: Cheese Cooking, Stretching and Moulding Dcjdpfx Acey Ddwbs Nog

Condition: like new (used), Year of construction: 2018, operating hours: 41 h, As new mobile extraction unit from TEKA Dcedpfey Ey Rgjx Ac Nsg Model: Filtoo

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Djdpfxoyx Exvo Ac Njcg

Year of construction: 2013, condition: used, Make: EXTRUDEX, Year of manufacture: 2013, comprising: Granulate drying/conveying unit, Manufacturer: Koch, Model EKO300F, Year: 2013, Serial No.: 4459, microprocessor control, drying cylinder ETB1000, capacity: 1,000 l, vacuum conveyor, 2 dosing/conveying units, IFS exhaust air system, single-screw extruder, 3-part cooling section, refrigeration unit by Daikin, diameter measuring system by Zumbach, inkjet coder by VideoJet, Model 1710, microprocessor control, flame treatment unit by Hill, Model MF20-2-1, Year: 2013, caterpillar take-off by Extrudex, Model BC105, discharge conveyor belt, discharge chute, waste container, mobile, forklift pockets, peripheral devices, control cabinets, set of long part racks, 2 accessory cabinets, 2-door, industrial vacuum cleaner, workbench, 1,500 x 700 mm with base cabinet, 3 drawers. Dodpfx Aceyx Eyto Necg

Condition: used, Straightening and welding plate made of steel Dsdoy N Du Rjpfx Ac Nscg Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic Dedoy N Duqopfx Ac Njcg - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Dcedpfx Aoy N Dukjc Neg Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: new, Jackson Translight 555+ Welding Helmet ADF Welding Helmet with ADF black TECHNICAL DATA Viewing area: 98 x 82 mm Optical clarity: 1/1/1/1 True Color: yes Weight: 612 g Protection level open: 3 Protection level closed: 5-8/9-14 Control: Digital Step adjustment: yes / internal Sensitivity adjustment: yes / internal Delay adjustment: yes / internal Grinding mode: yes / external Switching time: 0.2 ms Power supply: Solar cells & lithium (CR2032) batteries Dcedpfxsyh H Ade Ac Njg

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor Djdov I Akvspfx Ac Nscg - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t Dcodpfoy N D Nbox Ac Nog dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: used, table length 4900 mm table width 1300 mm table height 980 mm weight of the machine ca. 5,6 t Dcjdpfey N D I Rjx Ac Nog dimensions 5,0 x 1,3 x 0,6 m Welding / Straightening Table - Plate thickness: 80 mm - Plate thickness (incl. frame): 360 mm