Squaring/Edgebanding Lines

IMA + MEINERT COMBIMA/I/R75/2050

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg Dwedpfxeyx Uy Ao Al Soc • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Dwodpsvfm I Tjfx Al Sjc Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KERRES JS H2850/3 ID.NO. 2951 Djdpfx Alowv Tuys Sswc Kerres 3-car smoke cabinet adapted for smoking grid carts as the smoke spreads from the sides. Perfect for fish etc. Associated smoke generator and cooling unit for cooling the products are included, year of manufacture 2002. Dimensions 350 x 170 cm H 350 cm.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Dwedpfx Aleyz S T Se Sec

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Dodpfown El Ujx Al Sowc Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm. Dwedpfeki Tlqex Al Ssc

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine Dwsdpegwbbqsfx Al Ssc In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Dwodpfsyr Dmdex Al Sjc Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2025, condition: new, functionality: fully functional, POTATO KNIFE PEELING LINE 500KG/H: ROOT PEELER RP800 The Vegetable & Root Washer/Polisher is designed for effective cleaning and optional peeling of root vegetables like potatoes, carrots, and ginger. With durable soft or hard brushes, it can polish or peel raw produce efficiently. The machine features a sleek, rust-resistant stainless-steel design, high cleaning volume, low energy consumption, and user-friendly, continuous operation. Its long-lasting nylon cord brush rollers ensure durability and wear resistance. CONVEYOR AND KNIFE PEELING MACHINE CKP500 The Potato Washing and Peeling Machine with Washing Elevator is designed to streamline potato processing in production lines. The washing elevator lifts and soaks the potatoes, softening and cleaning the surface soil. Once ready, it automatically feeds them into the peeler, where the potatoes are efficiently washed and peeled. This automated process ensures continuous operation, reduces manual work, and prepares potatoes quickly for the next stage of production. Soaking Elevator SO2400-S The Prewashing Machine SO2400-S with Elevator is a durable, industrial solution for efficiently pre-cleaning root vegetables like potatoes. It streamlines the first washing stage and uses an integrated elevator to automatically transfer cleaned potatoes to the next step, saving time, reducing handling, and minimizing the risk of bruising or contamination. SORTING CONVEYOR VST2700 The sorting and conveying machine handles materials after cutting and peeling, with two-sided stations for manual inspection. Workers can remove any pieces with unclean skin for reprocessing. Built from durable 304 stainless steel, it resists impact and corrosion, and its adjustable speed allows the conveyor to be tailored for different Dsdpfxjx Ex Dle Al Sewc materials.

Condition: excellent (used), Dexion P90 pallet racking. Dwjdpfxehq Dd Te Al Sjc The racking is in very good condition. We have approximately 30,000 pallet spaces available. Uprights with the following heights: 6000/1100 - 98 euros 7000/1100 - 115 euros 8000/1100 - 130 euros 9000/1100 - 147 euros BX 120/40/13/2700 crossbeam, 2400 kg, 17 euros per piece BX 100/50/15/2700 crossbeam, 2850 kg, 18 euros per piece BX 60/40/13/2700 crossbeam, 900 kg, 14 euros per piece We issue invoices. We invite you to cooperate.