Used Kemper/Saf Welding Fume Extractor for sale (7,805)

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. Hfjdpfxey Shb He An Isl The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Hodpopgnfdefx An Ijfl Filtration area - 14.56 m2

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Hodpozlktpjfx An Iofl Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Hfodpozyu Igefx An Iol Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: used, Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 10,000 m³/h, total height: 2,150 mm, total length: 2,400 mm, total width: 1,800 mm, overall weight: 1,250 kg, We are offering this used KEMPER 811000100FU extraction system, manufactured in 2018. Type: 811000100FU Airflow rate: 10000 m³/h Hfsdpfx Anezk Duks Iel Voltage: 400 V Rated current: 13.8 A Motor power: 7.5 kW Current: 3 ~ Frequency: 50 Hz Duty cycle: 100% Protection class IP: Control voltage: 24 V Minimum compressed air supply: 5 bar Maximum compressed air supply: 6 bar Maximum static pressure: 2500 Pa Weight: 1250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Hjdpfxszhbqqo An Isfl

Condition: used, color: other, first registration: 06/2000, Year of construction: 2000, Serial number: 147 950 Hfodpfx Asucx H Dsn Ijl We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm Hfsdpfx Anspxq Ugo Isl -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. Hfjdpfx Anjpwhl Ue Isl The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1680 m3/h

Condition: excellent (used), Year of construction: 2011, 513 USED Line for ciabatta, square and round loaves. Features: - 3-row rounding, - additional rounding drums, - grain sprinkling. TECHNICAL DATA: - Year of production: 2011 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Hjdpszugm Djfx An Ijfl

Condition: excellent (used), Year of construction: 2003, 526 USED Industrial line for the production of rolls, Kaiser rolls, hamburgers, and hot dogs. EQUIPMENT: - KOENIG INDUSTRIE II divider-rounder - 6 rows - pre-proofer - bun marking station - final proofer TECHNICAL DATA: - year of production: 2003 - capacity 3000-12,000 rolls/h - weight 50-130 g - marking: 3 roll markings: Kaiser roll, Portuguese roll - final proofer equipped with temperature and humidity control Hfjdpfx Ajzwxr Rsn Ijl EXTERNAL DIMENSIONS (in cm): LINE: - W: 180 cm - L: 900 cm - H: 376 cm FINAL PROOFER: - W: 340 cm - L: 460 cm - H: 380 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: Hedpfx Anew U Ezze Iefl 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Bowl protection grid Electromechanical controls Analog timer Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Hfjdpozzz Szsfx An Iol Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Year of construction: 1993, condition: good (used), Radial fan, high-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: Höcker, radial fan extractor fan -Type: TRE 05-315 -Engine power: 1.1 kW / 2800 rpm -Volume flow: 2500 m³/h -Connection input: Ø 300 mm -Connection output: Ø 300 mm -Fan wheel: Ø 350 x 140 mm -Protection class: IP 54 Hsdpfx Asv E D Rxjn Ijfl -Dimensions: 750/440/H950 mm -Weight: 53 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Hodperl S Ufjfx An Iefl Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: good (used), Manufacturer: Fume Extractor Top filter: 280 x 280 x 20 mm Hfjdpfeduiu Ssx An Iol Middle filter: 270 x 270 x 230 mm Bottom filter: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Nozzle diameter: 45 mm Capacity: Connection: Accessories/Equipment: mobile Condition: good Weight: 0.1 t Dimensions: 400 x 630 x 750 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 922006, electrical fuse: 16 A, input voltage: 400 V, power: 1.1 kW (1.50 HP), Imperator II – Multi-chamber divider GB 100-600G / 400-2,900 G Continuously adjustable, 150-2,900g (depending on dough consistency) Machine belt, belt width 280mm Discharge height 810mm Thanks to the hydraulic spring and the multi-measuring chamber, the IMPERATOR CT II offers the optimal combination of dough handling and weight accuracy. Hjdpjzibdyjfx An Iefl Removable components such as the discharge belt, measuring piston, and flour spreader simplify cleaning. We have used the machine for breads of 500 grams and 1,000 grams (dry weight). The machine can be tested on site. Sale ex works (EXW): DE 75015 Bretten (near Karlsruhe)

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Hfedpfx Anjnyhvqs Iol Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) Hfodpfjy E Nykex An Iel ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, Hedpfx Ajzhtp Ejn Ijfl - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterbium Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm at 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference no.: C2177 9926ä

Condition: new, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, product height (max.): 800 mm, input frequency: 50 Hz, workpiece weight (max.): 40 kg, Equipment: documentation/manual, type plate available, SITEC TO800CAB1T automatic system for circumferential MIG welding with a single torch, featuring numerical control with an integrated PLC, a 7" color touchscreen, program management and storage, and provision for remote assistance and network connection. Key features: Maximum workpiece diameter: Ø 400 mm Maximum length: 800 mm Workable thickness: 2.5 mm Material: Steel (Fe) Maximum load capacity: 40 kg Welding process: MIG Motorized rotating head with variable speed, 0.3–3 rpm Hjdpfx Aozry Tfjn Isfl Rotating table, Ø 400 mm Tailstock with 150 kg thrust Automatic pneumatic lifting system 1 torch adjustment slide 1 pneumatic torch positioning system 2 rotating clamps, 500 A Fully enclosed protection cabin with internal lighting and fume extraction Complies with CE regulations Machine designed to ensure high precision, repeatability, and productivity in the circumferential welding of cylindrical parts. Ideal for industrial production and series processing. Condition: New – available for inspection and testing by appointment. Contact us for further information, photos, and pricing.

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Hfodjy H Hkvspfx An Iel Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: used, Make: Kemper Model: SP A Size: 125 Factory number: 6710424 Flour capacity: 125 kg, Hedjzux U Hjpfx An Isfl Dough capacity: 200 kg, 2 speeds, Includes 2 mobile mixing bowls The machine is sold as shown in the pictures.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 662547, warranty duration: 6 months, total width: 2,707 mm, total length: 745 mm, total height: 1,801 mm, overall weight: 280 kg, conveyor belt width: 290 mm, year of last overhaul: 2026, Used machine – year of manufacture 2013 Overhauled by a specialist, with a 6-month warranty. The Quadro Filius is a program-controlled machine for the gentle processing of all types of roll dough. The following types of rolls can be produced: - Rustic rolls, square - Rustic rolls, square, dimpled - Rustic rolls, diamond-shaped - Rustic rolls, triangular - Seeded breadsticks Hfodpew A Nxzjfx An Iol The machine is characterized by its high flexibility in the production of these baked goods in small and medium-sized businesses. It can be combined with downstream dusting units or a rotary table system. Operation is via a text display. The machine has been inspected and tested with dough by our master baker. Equipment: + Head machine, year of manufacture 2013 + Moistening station, year of manufacture 2013, moistens dough pieces from above and below + Seeding station with rotary table, year of manufacture 2013 + Integrated SIEMENS control system: operation via a text display + Machine is supplied with operating instructions Technical data: Hourly output: 1,400 - 4,000 pieces (product-dependent) TA (Take-Away Time): up to 170 (product-dependent) Weight range: 25 - 360 grams (product-dependent) Dimensions in working position: 2707 x 745 x 1801 mm (W x D x H) Dimensions in resting position: 1870 x 745 x 2435 mm (W x D x H) Machine body: Stainless steel, brushed Cladding panels: Stainless steel, brushed Connection: 230/400 V, 1 kW, 50 Hz, 16A CEE plug Compressed air: 6 - 8 bar Net weight: 280 kg Cable length: 3 m

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Hfsdpfxszli Acs An Iel