Used Meca Plastic Meca for sale (6,678)

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. Hsdpfx Anozyq Ebe Ijfl - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min Hedsxabc Ropfx An Iofl distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed Hsdpexabypsfx An Isfl . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Hfjdpfx Aoxabqzjn Iel Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Hodozzfr Espfx An Ijfl Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: used, Demonstration unit Condition: as new Multi-shot anchor nailer for 34° plastic- or paper-bound nails from 40 to 50 mm Hodpezk Nkqsfx An Iefl Contents: Device Allen key Safety goggles Tool oil User manual This tool is an unused display item

Condition: used, functionality: fully functional, conveyor belt length: 15,000 mm, conveyor belt width: 600 mm, conveyor belt speed: 500 mm/s, total length: 105,000 mm, total width: 678 mm, total height: 220 mm, power: 0.75 kW (1.02 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: Bonfiglioli, For sale: 7 units of stainless steel VLT Flat Top Conveyor Belts (600 mm) – Available individually or as a complete set! Are you looking for a reliable, hygienic, and versatile conveying solution for your production or packaging line? We offer these used stainless steel VLT Flat Top conveyor belts. Thanks to the high-quality stainless steel construction and plastic components, this system is ideally suited for both indoor and outdoor use. Flexible purchase and length: A total of 7 units are available, with a total length of 15 meters. The belts can be purchased individually (as separate sections) or as a complete set. The total length can be fully customized to your needs and layout! The belts are equipped with a high-quality blue Habasit modular belt and feature integrated pneumatic crate and product stoppers to accurately control or buffer your product flow. Technical specifications: Number available: 7 units (individual sale possible!) Total length: 15 meters (flexible and customizable) Frame material: High-quality stainless steel / plastic Belt width: 600 mm Belt type: Habasit modular plastic (modular belt) Speed: approx. 30 m/min Drive: Powerful Bonfiglioli motor Hsdpfsy U Iy Ujx An Iofl Rated power: 0.75 kW Voltage / Frequency: 400 V (three-phase) / 50 Hz Included: Pneumatic crate/product stoppers Assembly and service: The conveyor belts are available immediately. Do you not have the resources or time for assembly or connecting the parts? No problem. Our specialists can handle any assembly, connection, and installation at your location for an additional fee, upon request. Interested? Would you like to order a single section, view the entire set, or receive a competitive price quote right away? Please contact us via message or by phone!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 09/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Hfodpfx Anjzzk Sqj Ijl Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 10 mm Middle right - 10 mm Rear left - 10 mm Rear right - 11 mm

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Hedpstvfwkefx An Ijfl Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Hedpfx Aezz Rdtjn Iefl Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, functionality: fully functional, This is a handwashing and slop sink from the renowned manufacturer Blanco, in a robust design, not comparable to cheap manufacturers with inferior quality. You will receive an invoice with VAT shown. Our service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded appliances at fair prices Professional and competent advice – before and after purchase Free shipping within Germany (excluding islands/mountain stations) Provision of operating instructions, connection diagrams & spare parts Trade-in of your combination steam oven from model year 2004 onwards Complete range of accessories at attractive prices Condition: Used, fully functional Product description: W x D x H: 700 x 500 x 850/560 mm Sink size: Length: 340 mm Width: 240 mm Height: 150 mm Length: 370 mm Width: 340 mm Height: 150 mm Design: The handwashing and slop sink are arranged one above the other for space-saving reasons. Consisting of a compact, self-supporting construction, standing on four longitudinally seam-welded square tube feet (40x40x1.25 mm each). The ends of the uprights are equipped with height-adjustable plastic screws (+/- 15 mm) to compensate for uneven floors. Both sinks are fitted with three-sided stainless steel panels, with the cover of the handwashing sink arranged at an angle. The sinks are deep-drawn in a single process and seamlessly welded into the cover. The covers are bent over 50 mm on three sides. The handwashing sink is bent up 50 mm at the back with an outward flange. The slop sink is fitted with a raised profile edge (splash guard) all around. The handwashing and slop sink combination is equipped with plug-and-overflow valves 1 1/2″ and a support grid made of stable plastic (material: ASA). The water supply to both sinks is provided by a single-lever mixer tap 1/2″. Supply and drain lines as well as the tap are included separately and can be easily installed using the operating and installation instructions. Technical text HAU-P 5×7/ Version 3.0/ U. Herbstreith Hedpfx Ajzz Ibpon Isfl Technical data: Material: CNS 18/10 Material no.: 1.4301 Manufacturer: BLANCO GmbH + Co KG Type: HAU-P 5 x 7 Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (AGB).

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with 120 W power and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 120 W • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more Hfodpfx Ajx I S Nysn Isl • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 m/s

Condition: good (used), Year of construction: 2003, Opportunity to buy a 3 axis vertical machining center in good condition. Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours. Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks. Hfsdpfx Aszzz Eben Isl This machine is immediately available for delivery. Travel distance X-axis 1500 mm Travel distance Y-axis 300 mm Travel distance Z-axis 350 mm CNC Control HEIDENHAIN TNC 410 Total height 2300 mm Total width 3250 mm Overall weight 3200 kg Spindle speed (max.) 8000 rpm Product length (max.) 2900 mm Number of axes 3 Toolholder BT40 Clamp surface height above machine table 860 mm Max tool diameter 80 mm Max tool length 200 mm Max tool weight 3 kg Internal cooling Air cooling through the spindle Capacity tool magazine 19 positions Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Hodpfx Asx R A A Nen Ijfl Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: excellent (used), mileage: 346,569 km, power: 130 kW (176.75 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,760 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, total length: 8,340 mm, total width: 2,540 mm, total height: 3,650 mm, Year of construction: 2020, Equipment: AdBlue, air conditioning, electric window regulation, fog lights, power mirror, soot filter, = Additional Options and Equipment = - Leaf suspension - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Side door - Toolbox = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 5,132 cc Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 6,813 kg Payload: 6,687 kg Gross vehicle weight (GVW): 13,500 kg Condition Technical condition: Very good Hfsdjxdvc Topfx An Iel Visual condition: Very good Warranty Guarantee: No liability for printing or typographical errors. Subject to change, prior sale, and errors! Identification Registration number: 63bph6 Further Information Please contact Emad Al Shogran for more information. Vehicle number: 32 Mercedes Benz 1318 / 4x2 / Euro 6d / Manual / Air conditioning / 1 VIN: W1T96702610441435 Suspension: Leaf / Air Transmission: 6-speed manual gearbox Air conditioning Engine brake Distance control assist Lane keeping assist EURO 6d - AdBlue Wheelbase: 4,760 mm Special equipment: Battery 165 Ah, Power windows, Tinted windshield, Manual gearbox, Fuel tank: 180 L plastic, Radio preparation (12V), Frame overhang - extension, Spare wheel, Tail lift switch, Fleet management system interface, Driver’s cab seats: Comfort air-sprung driver’s seat, Steel rims 7.50x19.5, Side underrun protection, Preparation for Truck Data Center (fleet management system) Other equipment: Emissions standard EURO 6d, Axle configuration: 4x2, Front axle load 5.3 t, Starting/front mirror, Exhaust outlet to vehicle center, Electrically adjustable outside mirror, left, Classic cockpit, Steel air reservoir, Two-step entry, Driver assistance system: Brake Assist (Active Brake Assist), Driver assistance system: Lane Keeping Assist, Cab: S ClassicSpace, Cab version: ClassicSpace, Suspension: Leaf / air, Suspension: Front springs 4.7 t, Alternator 100 A, 6-speed gearbox - Type: G 71-6, 6-speed gearbox - Type: G 90-6, Urea tank (AdBlue): 25 L, Manual pop-up roof (steel), Rear axle hypoid gear 390, Info display 10.4 cm with additional indicator, Body/chassis: Chassis, Light and rain sensor, Heated air dryer, Engine 5.1 L - 130 kW diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4,760 mm, Disc brakes front and rear axle, Seat upholstery: fabric, Cab seats: Fixed single passenger seat, Rear mud flap spray protection, Rear axle stabilizer, Cab type controls, Tachograph / EC control unit, Daytime running lights automatic, Fixed rear underrun protection, Front underrun protection, Preparation for toll collection, Immobilizer, Permissible GVW 13.50 t = Company Information = No liability for printing or typographical errors. Subject to change, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: excellent (used), mileage: 387,050 km, power: 184 kW (250.17 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2017, Equipment: crane, Container truck with loading crane MAN TGL 12.250 First commissioned: July 13, 2017 Mileage: 387,050 km (7,824 hours) Emission class: 6 Automatic transmission, 12 gears JIMECA hookloader with telescopic boom Distance from hook to roller (retracted): 3 meters Distance from hook to roller (extended): 3.6 meters Distance from roller to bumper: 0.35 meters Palfinger PK4501 loading crane Year of manufacture 2012 2x hydraulically extendable 730 kg at 5.1 meters 520 kg at 7.1 meters With 5th and 6th functions Front tires: +/- 60% Rear tires: +/- 75% Hfsdpfx Anjzl Tpgs Ijl Automatic air conditioning On-board computer Cruise control Electric windows and Mirrors Rear air suspension Heated seats .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), mileage: 349,966 km, power: 130 kW (176.75 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - EPS - Particulate filter - Radio/CD player - Side door - Toolbox = Further Information = Axle Configuration Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 8,600 kg Payload: 3,390 kg Gross vehicle weight: 11,990 kg Functionality Refrigeration engine: Diesel and electric Condition Technical condition: Good Optical condition: Good Hedpeu Uiarjfx An Iefl Warranty Warranty: No liability for printing or typographical errors. Subject to alterations, prior sale, and errors! Further Information Contact Emad Al Shogran for further details. Vehicle number: 133 Mercedes Benz Atego 1 Carrier Supra 1250 / A/C / Euro 6 / Tail lift VIN: WDB96702510021014 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Distance keeping assistant Lane keeping assistant EURO 6 - AdBlue Wheelbase: 4760 mm Refrigeration unit Brand: CARRIER Type: Supra 1250 Refrigeration engine: Diesel + Electric Internal dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special features: Audio system: CD radio Comfort (Bluetooth), Battery 165 Ah, Standard cockpit, Assistance system: Brake assist (Active Brake Assist), Assistance system: Lane keeping assist, Electric windows, Fleetboard Dispopilot guide, Tinted windshield, Alternator 100 A, Fleetboard Dispopilot holder, Communication interface, Fuel tank: 180 l plastic, LED light package, Frame overhang - extension, Spare wheel, Acoustic reversing warning (external signal), Tail lift switch, Cab seats: driver’s seat armrest, Cab seats: comfort air-suspended driver’s seat, Exterior sun visor, Side underrun protection Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Front axle load 5.3 t, Starting/front mirror, Exhaust pipe to vehicle center, Electrically adjustable exterior mirror, left, Steel compressed air tank, Low compressed air unit, Two-step entry, Cab: S ClassicSpace, Cab variant: ClassicSpace, Suspension: leaf/air, Front suspension 4.4 t, 6-speed transmission - Type: G 71-6, 6-speed transmission - Type: G 90-6, AdBlue tank: 25 l, Manual tilting roof (steel), Rear axle crownwheel 390, 10.4 cm info display with additional display, Body/chassis: chassis, Engine 5.1 l - 130 kW diesel (OM 934), Engine brake, Engine compartment encapsulation, Wheelbase 4760 mm, Disc brakes front and rear, Seat upholstery: fabric, Cab seats: single passenger seat fixed, Rear mudguard splash protection, Rear axle stabilizer, Control type cab, Tachograph / EC control device, Fixed rear underrun protection, Front underrun protection, Immobilizer, Perm. total weight 11.99 t Refrigeration unit Brand: Carrier = Company Information = No liability for printing or typographical errors. Subject to alterations, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: used, DEMAG Ergotech System 650/1000-3300 with 6,500 kN clamping force and 3300 Euromap injection unit, equipped with a 2021 Wittmann W843 pro robot featuring servo B axis 270° and servo C axis 180°. The machine delivers 1,600 g shot weight through an 80 mm screw, supported by 4 hydraulic core pulls, 8 cascade circuits, and 16 hot runner zones for complex multi-component and technical moulding. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 6.500 Tie-bar clearance (H x V) mm: 1.000 INJECTION UNIT Injection unit size (Euromap): 3300 Screw diameter mm: 80 Max. shot weight (PS) g: 1.600 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 8 Hot runner control zones: 16 Handling robot (model / year): Wittmann W843 pro (2021) Hfjdpfx Anszz S Uas Ijl Robot strokes X / Y / Z mm: 1.200 / 2.000 / 3.000 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 241 + 108

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Hfjdpfx Anezz Thbo Isl Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Hfsdpfxozz Umxo An Iel Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 350, total width: 1,200 mm, total length: 6,500 mm, total height: 1,800 mm, cutting length (max.): 450 mm, type of input current: three-phase, compressed air connection: 6 bar, power of the servo motor: 750 W, power: 8 kW (10.88 HP), overall weight: 3,500 kg, inner diameter: 76 mm, feed rate X-axis: 450 m/min, feed rate Y-axis: 250 m/min, feed rate Z-axis: 120 m/min, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 120 mm, working width: 350 mm, input voltage: 380 V, installation height: 220 mm, MASTER BAG 350 – The Smart Choice for Sustainable Paper Bag Production Ready to replace plastic with performance? The MASTER BAG 350 is your gateway to high-speed, eco-friendly paper bag production – engineered for businesses that demand precision, reliability, and sustainability. Ideal for Takeaway, Fast Food, and Grocery Packaging Flat & Satchel Bag Formats Supports Biodegradable & Recyclable Paper CE Certified and Built for Global Markets Whether you're packaging burgers, roasted chicken, fries, or snacks – the MASTER BAG 350 delivers high-speed output with minimum downtime. Perfect for food chains, packaging converters, and green-focused brands. Key Machine Advantages High Output: Produces thousands of bags per hour with adjustable sizes User-Friendly Touchscreen Interface Eco-Compatible: Handles food-grade kraft, white, and printed paper Built for International Compliance (CE, EMC, Safety Standards) Compact & Efficient Layout for Easy Installation After-Sales Services That Make the Difference We don’t just sell machines – we build partnerships that last. Global Support Network From Europe to the Middle East, Africa, and Asia – our experienced team ensures local support and fast response, no matter where you are. Installation & Commissioning On-site or remote setup by certified engineers Full machine calibration and test run at your factory Staff training and production startup support Spare Parts & Maintenance Stocked spare parts in Netherlands and China Fast delivery of wear-and-tear parts Preventive maintenance guidance Hfodowk Nw Topfx An Isl Technical Support Direct WhatsApp/Email/Phone assistance Troubleshooting via video call Optional remote access diagnostics for servo systems Let’s Build Your Eco-Packaging Future Request a Quote or Demo Today Warehouses in: Netherlands | HONG KONG #MasterBag350 #PaperBagMachine #EcoPackaging #SustainableManufacturing #GutenbergMachines #FlatBagMachine #SatchelBagMachine #FoodGradePackaging #AntiPlastic #GreenIndustry

Year of construction: 2009, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2009. This Arburg Allrounder 520 A 1500-70 Alldrive features a clamping force of 1,500 kN and a maximum injection pressure of 2,500 Bar. It has a screw diameter of 15/18 mm and accommodates molds with a maximum height of 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 A 1500-70 Alldrive machine we have for sale. Contact us for further details. • Clamping force: 1,500 kN • Space between columns: 520 x 520 mm • Maximum mold height: 550 mm Hfedpfx Anez Ahtbs Isl • Minimum mold height: 250 mm • Screw diameter: 15/18 mm • Maximum injection volume: 15.5/22.9 cm3 • Maximum injection pressure: 2,500 Bar • Centering ring: 125 mm • Pneumatic valve: 1

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Hedpfxoz Ai Nqo An Iofl 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 78, rotor length: 1,400 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Genox V1500 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 75kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1400mm wide x 400mm diameter Rotor with 77pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft. An optional "Long Bed" machine is available which has an enlarged shredding chamber with 1.3m distance between the rotor and hydraulic feeder which is well suited for processing bulky items such as Pallets, Wheelie Bins and IBC's. Hfodpfx Anjz Ai Rhj Isl

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, rotational speed (max.): 80 rpm, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Hfjdpfx Aez Ai Iten Isl Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.