Used Nilma Atir Ii for sale (2,099)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Laodpfx Aex Rqkusnxsg Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Make: Mecatherm Model: BLOC HPII Ledpfxjzx Er Hj Anxoag Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.

Year of construction: 1995, condition: used, machine/vehicle number: 20225, Color: green Lasdpfxobrcmfs Anxog Slighty used! DIN 1415 Impetus electromechanic

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney. Laedpfszy R Rdsx Anxsg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Lajdpszqyxxofx Anxeg Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Lodjyug Enepfx Anxeag

Condition: used, Year of construction: 2011, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm turning speeds 15000 U/min c-axis 0,001 ° gripping station 16 mm turning length 80 mm turning speeds 15000 U/min positive location each 0,001 ° number of tools 23 total number of milling stations max. 12 control Mitsubishi MELDAS Number of axles 7 St. Number of working hours 25183 h total power requirement 3,7 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,1 x 1,7m plus FMB swiss type machine Citizen K1&E-VIIP, built 2011, with FMB Minimag 20 Excellent conditions!From precision engineering company. Ledpfoz Alalsx Anxeag

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Laedpez Ada Defx Anxeg

Condition: used, Year of construction: 2012, lifting height: 2,020 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.120 kg Laedpfxjv Tki Dj Anxsg Functional Lifting capacity: 227 kg Working height: 650 cm Dimensions of cargo space: 180 x 81 x 202 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJIII 3215 Year of build: 2012 Condition: Used Data: Max. working height: 6,50 m Platform height: 4,50 m Lifting capacity on extension: 227 kg Platform dimensions LxW: 1,58 x 0,66 m Total dimensions LxW: 1,80 x 0,81 m Height transport position with railing: 2,02 m Height transport position without railing: 1,64 m Movable up to working height: 6,50 m Ground clearance: 0,06 m Drive type: Battery Only indoor using: yes Own weight: 1.120 kg Special features: white tires, anchor points for restraint systems (PSA) available. Location: 41468 Neuss immediately available

Condition: used, mileage: 126,024 km, power: 92 kW (125.09 HP), first registration: 01/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 7, Equipment: ABS, air conditioning, central locking, soot filter, * Air conditioning * Trailer hitch * L3 * Double cab * 7 seats * Valid TÜV inspection until 2028/4 Special equipment: Airbag on the passenger side, Audio system: Radio with CD player (MP3 compatible) with Bluetooth and Plug & Music module, Radio remote control on the steering wheel, Bluetooth hands-free system, USB connection including AUX-IN connection (Plug & Music), Glove compartment with cooling function, Wheel covers, Spare wheel in roadworthy condition Additional equipment: Storage compartment, Airbag on the driver side, Exterior mirrors, electrically adjustable and heated, Outside temperature display, Side marker lights, Tachometer, Electronic brake-force distribution, Interior filter: Pollen filter, Body/structure: Standard double cab pickup, Fuel tank: 80 liters, Steering column (steering wheel) height adjustable, Engine 2.3 liters - 92 kW dCi Diesel catalytic converter, Wheelbase 4332 mm, Smoker's package, Low emissions according to emission standard Euro 5, Shift indicator, Seat cover/upholstery: Fabric, Seats in the driver's cab: 2nd row 4-seater bench, Seats in the driver's cab: Double passenger seat multifunctional, Seats in the driver's cab: Driver's seat height adjustable, Heat-insulating glazing. Laodpoz A I Ayjfx Anxjg

Condition: used, mileage: 80,403 km, power: 125 kW (169.95 HP), first registration: 12/2024, fuel type: diesel, empty load weight: 2,198 kg, maximum load weight: 1,302 kg, overall weight: 3,500 kg, tire size: 235/65R16C, wheelbase: 3,665 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,940 mm, total width: 2,000 mm, total height: 2,620 mm, loading space length: 5,932 mm, loading space width: 1,993 mm, loading space height: 2,616 mm, Year of construction: 2024, front tire size: 235/65R16C, rear tire size: 235/65R16C, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, seat heater, sliding door, soot filter, traction control, trailer coupling, Parking package with rearview camera, smoker’s package, winter package, trailer coupling: fixed ball head, rearview camera, driving assistance system: Attention Assist (fatigue detection sensor), multifunction steering wheel, outside temperature display, instrument cluster with color display, speed limiter (cruise control), automatic activation for headlights, windshield wipers with rain sensor, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors with blind spot assist, wooden flooring in the cargo area, sliding door to cargo/passenger compartment on the right, wheelbase 3665 mm, airbag on the passenger side, reinforced front axle, seats in the cab: double passenger seat, seats in the cab: heated passenger seat, seats in the cab: heated driver seat, seats in the cab: adjustable driver seat, seat cover/upholstery: fabric, tire pressure monitoring system, ceiling light in the cargo area with door contact, adaptive brake light, Mercedes-Benz emergency call system, storage compartment above the front windshield, storage compartment below the dashboard on the passenger side, airbag on the driver side, acoustic package, all-weather floor mats, hill start assist, trailer coupling: electrical system for trailer socket, 13-pin trailer socket, drive type: rear-wheel drive, exterior mirrors electrically foldable, DAB tuner (digital radio reception), entry handle on the rear pillar on the left, entry handle on the rear pillar on the right, entry handle for the sliding door on the cargo area partition, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: breakdown management, driving assistance system: crosswind assist, generator 250 A, noise reduction measures, 6-speed transmission - TSG (Eco Gear), cup holder in front, grab handles on the A-pillar, rear door (opening angle 270 degrees), intelligent speed assistant (ISA), body/structure: high-roof standard van, communication module (LTE) for digital services, fuel tank: main tank 71 liters, cargo area package 2, cargo area light LED, continuous cargo area partition, cable duct on the rear portal, cable duct on the side wall, truck registration, marker lights on the side, engine 2.0 L - 125 kW CDI CAT, multimedia system MBUX (touchscreen 10.25"), start/stop system for the engine. Note: Ljdpfx Anjz A H S Hexeag Despite careful review of all our prices, errors still occur. Some of these are caused by transmission errors in the systems of the various platform providers. But errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price indication also cannot be declared as part of the contract. If you place particular importance on a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm Laedpfocxxwcsx Anxog ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Ljdpfxjzhm Dpo Anxjag Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, mileage: 644,000 km, power: 335 kW (455.47 HP), first registration: 01/2012, fuel type: diesel, empty load weight: 11,840 kg, maximum load weight: 14,160 kg, overall weight: 26,000 kg, tire size: 385/65/315/80 R 22,5, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,000 mm, Equipment: air conditioning, cabin, differential lock, trailer coupling, Vehicle location: en route / in transit, cab, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, Telligent transmission with 3 pedals, raised exhaust, lifting and lowering mechanism, differential lock, rotating beacon, leaf-air suspension, trailer hitch with air and light connections, foldable underrun protection, hydraulic cross-locking, green environmental badge. Lajdpfx Anoz A At Hsxog Wheelbase: 3900 mm, Body: VDL roll-off system S 21-550 for containers up to 6.00 m, disc brakes on front and rear axles, 50 mm trailer hitch, 3 pedals, turbocharger renewed in 2025, used and new containers available for an additional charge, the vehicle will be available from September 18, 2026, data subject to change as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdpfx Anez Dnzljxeag

Condition: ready for operation (used), TACHII 1990 sensor cable/interface cable, length 3.9 m, with 2 Honda MR-20L 20-pin connectors for Fanuc, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdoz Dnzxspfx Anxjg

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 4.2 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Laodoz Dnz Espfx Anxog

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm • Maximum mold height: 390 mm • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 Ledpfez Dk Tqox Anxsag • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2

Condition: ready for operation (used), TACHII 1990 Sensor cable/interface cable, length 7.4 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Ljdpfxoz Dn Acs Anxsag

Condition: used, mileage: 384,586 km, power: 235 kW (319.51 HP), first registration: 11/2011, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: air conditioning, electric window regulation, Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Lajdjx Aizmspfx Anxjg Drive: Wheel GVW: 26.000 kg Make of bodywork: VDK PUSHER IIK = Additional options and accessories = - PTO

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 227 kg Lsdpszp Dh Ujfx Anxsag Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2015, fuel type: electric, Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Lasdpozpdr Hefx Anxeg

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original Laedpfx Anez D H D Eoxog software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Fiber laser, fiber laser cutting system with flat bed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer: DURMA Type: HD-F III 3015 III BH-IPG 2kW Serial No.: 822817712 Year of manufacture: 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area: 3000 x 1500 mm Tube cutting device: up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power consumption: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50, 100, 200, 300 µm - Max. power consumption 42 kW - Power consumption machine 20 kW - Power consumption filter 4 kW - Power consumption cooler 10+1 kW - Power consumption resonator 7 kW Mild steel sheet thickness max. 12 mm - Stainless steel sheet thickness max. 6 mm - Aluminum sheet thickness max. 6 mm - Copper sheet thickness max. 3 mm - Brass sheet thickness max. 6 mm Working area X-axis 3060 mm Working area Y-axis 1530 mm Working area Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² Lasdpfxjkdnv To Anxjg - IPG fiber laser resonator (see separate document) - Water cooling unit for laser source and cutting head (see separate document) - Under-table extraction and extraction filter system (see separate document) - with 2-position shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flat bed - Guides for tube laser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, PBT Works SuperSWASH III PCB Cleaning System / Printed Circuit Board Washing System – 2021 Cleaning system for printed circuit boards / electronic assemblies For sale: a cleaning system for the professional cleaning of printed circuit boards and electronic assemblies. Features: * Cleaning, rinsing, and drying in a single process * Suitable for printed circuit boards, assemblies, solder frames, and stencils * Touch panel operation * Integrated DI water treatment system * Conductivity measurement * Efficient air knife for rapid drying * Barcode scanner for traceability * Industrial design Condition: used, fully functional Inspection possible by arrangement. Lodpjz D Di Ssfx Anxoag Please contact us if you are interested.