Used Niro Atomizer Spray Dryer for sale (3,367)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated Iodov Tm Ayopfx Apnsib + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: new, Year of construction: 2026, functionality: fully functional, sweeping width: 530 mm, fuel type: electric, drive type: Elektro, Scrubber dryer Condition: New machine Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2025 Battery condition: New Ijdpfx Apeyi Impenjib Description: New machine with 12 months warranty

Condition: used, Year of construction: 1999, Volumetric flow rate ISO 7183 A1: 0.6 m³/minPressure dew point: 3°CPressure loss: 0.07 barPower consumption at 100% flow: 0.29 kWPower consumption at 50% flow: 0.17 kWOverpressure: 3 to 16 barAmbient temperature: +3 to +43°CMax. inlet temperature (compressed air): 55°CDimensions (W x D x H): 630 x 484 x 779 mmWeight: 70 kgCompressed air connection: G 3/4Condensate drain connection: G 1/4Electrical supply: 230 V / 1 / 50 HzStorage location: Iisdpoy Ernwjfx Apnsb

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Iisdpfjy Aawnsx Apnob Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer 100 litres Ijdpfjxtitkex Apnoib As new, was only used for sampling in a toolmaking facility.

Condition: used, Year of construction: 2019, operating hours: 601 h, functionality: unexamined, working width: 850 mm, area performance: 5,100 m²/h, overall weight: 550 kg, tank capacity: 125 l, water tank capacity: 110 l, noise level: 60 dB, rotational speed (min.): 170 rpm, rotational speed (max.): 170 rpm, empty load weight: 550 kg, We are offering this used FIMAP MR 85B ride-on scrubber dryer, year of manufacture 2019. Battery-powered scrubber dryer with integrated charger The Fimap MR85B battery-powered scrubber dryer is ideal for cleaning sensitive areas thanks to its very low noise level of under 60 dB, allowing for highly discreet operation. The Fimap MR ride-on scrubber dryer operates efficiently and ensures high productivity during maintenance cleaning of large areas. Specifications: - Operating time: approx. 4 hours - Solution tank: 110 L - Recovery tank: 125 L - Brush speed: 170 RPM - Brush pressure: 30 kg - Machine weight (empty, without batteries): 550 kg - Battery weight: 132 kg - Area coverage: up to 5,100 m²/h - Working width: 850 mm (2 brushes) - Squeegee width: 1,105 mm Scope of delivery: - Complete squeegee assembly (KIT) - Charger If you have any questions or require further information, please feel free to send us a message or call us. Iijdpfx Aoy Ewrhspnsb

Condition: used, Year of construction: 2016, operating hours: 1,315 h, functionality: fully functional, working width: 850 mm, area performance: 15,000 m²/h, overall weight: 1,130 kg, tank capacity: 215 l, total height: 1,500 mm, total width: 870 mm, total length: 1,960 mm, water tank capacity: 200 l, battery voltage: 36 V, noise level: 69 dB, battery capacity: 390 Ah, rotational speed (min.): 180 rpm, rotational speed (max.): 180 rpm, brushing unit diameter: 430 mm, year of last overhaul: 2025, We are offering this used Fimap MAGNA 85 ride-on scrubber dryer, year of manufacture 2016. Fimap Ride-On Scrubber Dryer Magna 85 B Battery-Powered Scrubber Dryer with Disc Brush System The Fimap Magna 85 B is especially suitable for routine cleaning and deep cleaning of surfaces up to 15,000 m². The Fimap Magna comes equipped with automatic front-wheel drive. Non-marking, slip-resistant wheels ensure safety even on wet floors. Technical specifications: - Working width: 85 cm Iijdpfx Ajy Ewpyspnjb - Number of brushes: 2 - Power supply: 36 V battery - Tank capacity: solution/recovery tanks: 200/215 L - Noise level: 69 dB(A) - Vacuum: 190 mbar - Brush speed: 180 rpm Included accessories: - 2x Brush D.430 PPL 0.9 Black # 045000385 - 6x Maintenance-free AGM block batteries EVL16A-A, 06-V / 335-Ah C5 / 390-Ah C20 ##Batteries renewed in 10/2026## - 1x Battery charger E230G 36/60 B25-FP FILON FUTUR L for 6 x 6-V / 390-Ah Discover AGM batteries Weight: 1,130 kg Dimensions (LxWxH): 1960 x 870 x 1500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) Iiedexnpczepfx Apnsb - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm Iiedor Ha Ehepfx Apnsb - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team Iisdpfx Aonbd Rrspnjb - Pneumatic retractor

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team Isdpfx Apenbd Nbjnjib - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) - Service door: 640x1800 mm Iiedpfsm Tv I Aox Apnjb - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm Iodpoxm U Exofx Apneib - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: new, Year of construction: 2026, -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 2 LED panels -No assembly required - ready to go Steering - Automatic from the central block located outside; Power - 400V Supply: -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating - heating supply 12kW Filters - preliminary, cardboard, carbon Security: -Emergency stop Iisdpfx Ajnbd Ilepnsb -Pressure lock on the door Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm Iijdpfenbdlbsx Apneb - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck VLSM2120 Technical data: Year of construction: 2007 Isdpey Sxw Ejfx Apnoib Heating capacity: 190 kW Supply temperature: 95 degrees Electrical connection capacity: 13A Fans: 6 x 0.75 kW

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units Iijdpfx Apsy Amr Eenob - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Iiodpfxeyuvp As Apneb -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Used Atlas Copco FD310 refrigerated dryer 18.60 m³/min 14 bar Isdoym Ub Ujpfx Apneib Year of manufacture: 2011.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Iiodeyuut Hspfx Apneb -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 45 kW (61.18 HP), operating pressure: 10 bar, SCREW COMPRESSOR EKOMAK 45, type EKO 45, 10 bar, 45 kW. Equipped with refrigerated dryer, water separator, and 1,500 L tank. EXCELLENT CONDITION, ALWAYS SERVICED. READY FOR IMMEDIATE USE, ALL DOCUMENTS AVAILABLE. Iiedpfjy D D D Usx Apneb

Condition: good (used), Year of construction: 2013, functionality: fully functional, volume flow: 0.85 m³/h, total width: 630 mm, total length: 484 mm, total height: 779 mm, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 43 °C, ambient temperature (min.): 3 °C, type of cooling: air, power: 0.29 kW (0.39 HP), input frequency: 50 Hz, Equipment: type plate available, KAESER Refrigeration Dryer SECOTEC TA 8 – Year of Manufacture 2013 – Recently Serviced For sale is a reliable refrigeration dryer TA 8, ideal for compressed air treatment in workshops or industrial settings. The dryer was manufactured in 2013 and has recently undergone a complete service by a KAESER partner – technically flawless and immediately ready for operation. Technical Data: * Volume flow: 0.85 m³/min * Pressure dew point: +3 °C * Operating pressure range: 3 – 16 bar * Pressure drop: 0.14 bar Iijdpfoy H Amyox Apneb * Refrigerant: R134a * Connection: G 3/4 * Power supply: 230 V / 1 phase / 50 Hz * Ambient temperature: +3 °C to +43 °C * Dimensions (W x D x H): 630 x 484 x 779 mm * Weight: approx. 80 kg Energy consumption: * 0.27 kW at 100% load * 0.15 kW at 50% load * 0.04 kW at 10% load Condition: Used, well-maintained, fully operational – in very good condition thanks to recent servicing. The price includes VAT, and VAT is itemised. Inspection by appointment possible. If interested, please get in touch!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 22,000 h, Dust-free & odorless – for clean production environments Compact & space-saving – fits into your facility as well. Robust & durable – stainless steel construction Flexible fuel options – natural gas, propane, or renewable gas (RNG) Iiedpfx Asyidbaepnjb Low maintenance costs – for economical operation Energy efficient – only 700W thermal energy per liter of water Pyrolysis integration – possible production of charcoal pellets. 24/7 operation – thanks to a smart monitoring system with plant supervision Stainless steel construction (jumbogroup)

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns Ijdpfxefy T Aro Apnoib The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events Iisdjfz U Hvspfx Apnjb It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.