Used Resistance for sale (1,753)

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch Trailer 150x250cm, 750kg, "Type U6M" Our best-selling unbraked Koch trailer Type U6M with a superstructure made entirely from anodized aluminium. Passenger car trailer Type U6M with loading dimensions of 150 x 250 x 25cm. Lightweight aluminium trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch Trailer Works has been manufacturing quality trailers "Made in Germany" for over 30 years. Features - 10-year warranty (unique) - Double-walled anodized aluminium side walls, 30mm (unique) - Side wall with load securing system in V2A stainless steel (unique) - 1 x 22/200 aluminium ramp, mounted laterally - Side wall assembly entirely with 8mm V2A stainless steel bolts (unique) - Jockey wheel included as standard - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional Equipment Dcjdpsi R Hxkofx Anfog - 15mm anti-slip, water-resistant birch plywood platform (phenolic resin coated) - Axle and drawbar fully hot-dip galvanized by AL-KO - Large 185/70 R13 balanced tires, rated for up to 100 km/h - Steel mudguards bolted with 8mm stainless steel screws - 12-volt electrical system, 13-pin plug with reversing light - 2 rear supports as shown are available as an accessory for €102.00 Other Information - Registration certificate / Vehicle document Part II If you wish to purchase this trailer or have further questions regarding trailers, please use our internal enclosed trailer "Type-U6M_Offer" form.

Year of construction: 2021, condition: like new (used), Required air-pressure 7 bar weight 3 kg dimensions of the machine ca. 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2" BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - +60°C Djdpfxeul Edvs Anfscg

Condition: new, mileage: 260 km, power: 309 kW (420.12 HP), fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, Internal vehicle number: MK200103 Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SCANIA P 420 B8x4HZ with Meiller three-way tipper * Manufacturer: SCANIA * Model: P 420 B8x4HZ * Axle configuration: 8x4 * GVW: 42 tonnes (permissible total weight) * Unladen weight (chassis with fluids): 10,766 kg * Front axle: 7,238 kg * Rear axle: 3,528 kg * Wheelbase: 4,550 mm / 1,445 mm ----Superstructure – MEILLER Three-way Tipper * Manufacturer: MEILLER Polska Dodew Hi Ahopfx Anfocg * Loading volume: 18.5 m³ * Load bed length: 5,800 mm * Load bed width: 2,300 mm * Drop sides: * Side & rear dropside: mechanically foldable, height 1,500 mm * Front wall foldable, with reinforcement and protection system * Material: HARDOX 400/450 – very robust and wear-resistant * Floor: 8 mm HARDOX * Hydraulics: Meiller with 60 l tank, 275 bar * Special features: * Side flaps, tarpaulin holders, aluminium mudguards, anti-slip floor * Emergency stabilizer, step plates, front spare wheel carrier * External stainless steel flaps, side underrun protection ----Chassis & Technology * Suspension: * Front axle: 3x29 parabolic leaf springs * Rear axles: 2x41 + 2x48 parabolic leaf springs, progressive * Suspension type: fully mechanical (leaf springs) * Steering: Power steering according to 92/62/EEC * Frame class: F958 – heavy-duty design ----Braking system * Type: pneumatic drum brakes on all axles * Brake system: * Brake cylinders: diaphragm + spring mechanism * Electronic braking system EBS with ABS (off-road function) * Additional brake: manual + automatic * Retarder: Not available ----Lighting & Electricity * Headlights: LED * Daytime running lights: LED with parking light function * Fog lights: Halogen * Work lights: pre-wired behind cab * Rear lights: bulb type, mounted on brackets * Sockets: 24V, CB radio with Stabo XM 3004 * Camera system: 2 analogue camera connections pre-installed ----Safety & Systems * Driver assistance systems: * ABS Offroad * Hill Hold * Driver Attention Support * VRU CWS/REV – warning system for vulnerable road users (front/rear/side) * Cruise control with map-based speed limit recognition * Tyre pressure monitoring (TPM) for 12 wheels * Locking system: * Remote central locking (433 MHz) * 2 keys * Immobiliser ----Tachograph & Speed * Tachograph: Smart 2 Stoneridge (digital, OTA update capable) * Maximum speed: * Technically: 90 km/h * Limited: 89 km/h ----Cab – Equipment * Cab type: CP17N – short cab * Driver/passenger seat: Medium A / foldable * Seats: XT fabric seats with heating, single seat on passenger side * Dashboard: with chrome trim, vinyl interior panels * Steering wheel: multifunction * Infotainment: * 10.1" interactive display (CID) * CarPlay, AM/FM radio, USB-C, Bluetooth * Air conditioning: automatic * Storage: drawer + storage compartments ----Paintwork * Cab: Cherry Red * Chassis: Sub Grey * MCC (Multi Colour Concept): * Front grille + trim: Black Charcoal * Additional details available on request.

Condition: new, mileage: 260 km, power: 309 kW (420.12 HP), fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 05/2028, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, Internal vehicle number: MK200103 Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) SCANIA P 420 B8x4HZ with Meiller three-way tipper * Manufacturer: SCANIA * Model: P 420 B8x4HZ * Axle configuration: 8x4 * GVW: 42 tonnes (permissible total weight) * Unladen weight (chassis with fluids): 10,766 kg * Front axle: 7,238 kg * Rear axle: 3,528 kg * Wheelbase: 4,550 mm / 1,445 mm ----Superstructure – MEILLER Three-way Tipper * Manufacturer: MEILLER Polska * Loading volume: 18.5 m³ * Load bed length: 5,800 mm * Load bed width: 2,300 mm * Drop sides: * Side & rear dropside: mechanically foldable, height 1,500 mm * Front wall foldable, with reinforcement and protection system * Material: HARDOX 400/450 – very robust and wear-resistant * Floor: 8 mm HARDOX * Hydraulics: Meiller with 60 l tank, 275 bar * Special features: * Side flaps, tarpaulin holders, aluminium mudguards, anti-slip floor * Emergency stabilizer, step plates, front spare wheel carrier * External stainless steel flaps, side underrun protection ----Chassis & Technology * Suspension: * Front axle: 3x29 parabolic leaf springs * Rear axles: 2x41 + 2x48 parabolic leaf springs, progressive * Suspension type: fully mechanical (leaf springs) * Steering: Power steering according to 92/62/EEC * Frame class: F958 – heavy-duty design ----Braking system * Type: pneumatic drum brakes on all axles * Brake system: * Brake cylinders: diaphragm + spring mechanism * Electronic braking system EBS with ABS (off-road function) * Additional brake: manual + automatic * Retarder: Not available ----Lighting & Electricity * Headlights: LED * Daytime running lights: LED with parking light function * Fog lights: Halogen * Work lights: pre-wired behind cab * Rear lights: bulb type, mounted on brackets * Sockets: 24V, CB radio with Stabo XM 3004 * Camera system: 2 analogue camera connections pre-installed ----Safety & Systems * Driver assistance systems: * ABS Offroad * Hill Hold * Driver Attention Support * VRU CWS/REV – warning system for vulnerable road users (front/rear/side) * Cruise control with map-based speed limit recognition * Tyre pressure monitoring (TPM) for 12 wheels * Locking system: * Remote central locking (433 MHz) * 2 keys * Immobiliser ----Tachograph & Speed * Tachograph: Smart 2 Stoneridge (digital, OTA update capable) * Maximum speed: * Technically: 90 km/h * Limited: 89 km/h ----Cab – Equipment * Cab type: CP17N – short cab * Driver/passenger seat: Medium A / foldable * Seats: XT fabric seats with heating, single seat on passenger side * Dashboard: with chrome trim, vinyl interior panels * Steering wheel: multifunction * Infotainment: * 10.1" interactive display (CID) * CarPlay, AM/FM radio, USB-C, Bluetooth * Air conditioning: automatic Dsdpfxjw Hi Auj Anfecg * Storage: drawer + storage compartments ----Paintwork * Cab: Cherry Red * Chassis: Sub Grey * MCC (Multi Colour Concept): * Front grille + trim: Black Charcoal * Additional details available on request.

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. Dcsdpfeyn Uhwjx Anfog • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Axles (braked version): AL-KO braking system Dcsdpsyn Ug Tjfx Anfsg Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Subject to errors and prior sale

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core Dcsdpeyn Uc Isfx Anfog * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Dcodjyn Udrjpfx Anfog Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale

Condition: used, mileage: 70 km, power: 129 kW (175.39 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,100 mm, next inspection (TÜV): 06/2027, color: white, emission class: euro6, number of seats: 3, loading space volume: 19.8 m³, loading space length: 4,135 mm, loading space width: 2,108 mm, loading space height: 2,312 mm, construction height: 3,120 mm, working width: 2,170 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, soot filter, traction control, Trailer hitch up to 3.5 t, wind deflector, automatic transmission, cabin ventilation and heating system with automatic climate control, central locking, heated exterior mirrors, electric windows, adaptive cruise control (ACC) with radar sensor, multifunction leather steering wheel, rear parking aid, reversing camera with 7-inch monitor, spare wheel, summer tires, light sensor, rain sensor, LED headlights, full LED lighting (daytime running lights, fog lights, Daily aluminum wheels), radio, navigation system, touchscreen, Bluetooth, hands-free system, USB interface, Apple CarPlay, Android Auto, thermal insulation glazing, storage package, tachometer, driver airbag, passenger airbag, anti-lock braking system (ABS), electronic stability program (ESP), air suspension seat, comfort seats, center armrest, driver COMFORT suspension seat with armrest and lumbar support, start/stop automatic, particulate filter, full service history, immobilizer, box body, clearance lights, power steering, box body with side loading door, 8 lashing rings, lashing rails can be retrofitted, STYLE 3.5S: Daily front grille with chrome strips, dipped beam, high beam, front passenger bench seat with folding table, MY IVECO NAVI infotainment system with 10-inch display, USB A + C sockets, 3-point seat belts, 170 cm air conditioning compressor, full head restraints, reversing camera, box body structure made from 24 mm thick sandwich panels with white polyester glass laminate outer and inner cladding, wall connection system based on anodized aluminum corner profiles, aluminum subframe, full laminate roof, double rear doors with increased opening angle (270 degrees), rear door security, stainless steel locks with cassette handle on right and left leaf, frost-resistant floor made of 15 mm waterproof plywood with double-sided film, load-securing rings in the surrounding profile (8), moisture-resistant LED interior lighting, fixed aluminum underrun protection strips, single-step extendable entrance ladder, grab handle, aerodynamic rear spoiler with LED contour markers and integrated STOP light, external LED lighting compliant with KD and EU regulations, seatbelt system with warning system (driver's side), electronic brake force distribution (EBD), brake assist, traction control (ASR), crosswind assist, body/build type: box body, wheelbase 4100 mm, drive type: rear wheel drive. Over 150 transporters and buses in stock. Financing or leasing available through Santander Consumer Bank, Targo Bank or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to change, errors, and prior sale. Delivery available at extra cost. Export license plates can be arranged on-site. Trade-in of your old vehicle possible. Retrofitting available for: - Trailer couplings up to 3500 kg - Auxiliary heaters - Screen for reversing camera and/or navigation via smartphone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Installation of a tail lift and other individual solutions for your business needs available at extra cost. Dcjdpfx Anowqw Srefeg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm Dsdoy Au Nfjpfx Anfscg -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 Dodpfxjy Au Eye Anfocg -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here was built to customer specifications and has already been delivered. We can supply you with this machine from stock or manufacture a new one – gladly taking your individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €8,950 net Djdpfx Asy H A T Tjnfscg Options (upon request): The listed options are based on successfully completed customer projects and allow targeted customization of the machine for specific applications. The basic machine offers a functional standard version – in practice, it is typically enhanced with additional equipment and customized for each project. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure setting - Lateral piston movement (900 mm) - Bending tool - Torsion-resistant cylinder with manual travel adjustment - V-profile straightening fixture in combination with table plate - LED lighting - Foot pedal - Cooling unit ===== Technical Data & Information: ==== General Information Design: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open depth: 400 mm Mounting height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Manual lever operation Manual fine adjustment via lever Connection: 400 V / 50 Hz Total connected load: approx. 8 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Two-layer RAL paint finish ===== Pressing, removing, assembly work, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are built according to German as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our core competence is in custom machine building and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulic components used in our presses are predominantly from leading European manufacturers.

Condition: good (used), Koma Pigs stunning device Dcodoy Edvtopfx Anfsg This device is suitable for the electrical stunning of animals. From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Dcsdpfx Ajy Nugqsnfog Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Condition: new, functionality: fully functional, machine/vehicle number: FDU1407/2210069 014, power: 0.75 kW (1.02 HP), rotational speed (min.): 1,440 rpm, input frequency: 50 Hz, type of input current: three-phase, protection type (IP code): IP55, Siemens gear motor as good as new. It is versatile and can be used well in industry due to its robust construction. Dust and water resistant. Insulation class F; maximum operating temperature for the windings is 155 °C The motor is equipped with a thermistor (TP-PTC). The electric motor is a compact and reliable drive motor with an output of 0.75 kW at 230/400 V and a current of 3.11/1.79 A. The motor is designed for continuous operation (S1) and operates at a rated speed of 1440 rpm at 50 Hz. With a rated torque of 106 and an IP55 protection class, it offers protection against dust and water jets, making it ideal for industrial applications. Dcsdouqch Aspfx Anfog

Condition: new, machine/vehicle number: FDU1509/2272220 001, power: 0.55 kW (0.75 HP), rotational speed (min.): 1,440 rpm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15 kg, torque: 106 Nm, protection type (IP code): IP55, Siemens gearbox as good as new. Dcjdeuqaz Tepfx Anfog It is versatile and can be used well in industry due to its robust construction. Dust and water resistant. Insulation class F; maximum operating temperature for the windings is 155 °C The motor is equipped with a thermistor (TP-PTC) The electric motor is a compact and reliable drive motor with an output of 0.55 kW at 230/400 V and a current of 1.37/2.38 A. The motor is suitable for continuous operation (continuous operation). The motor is designed for continuous operation (S1) and operates at a rated speed of 1440 rpm at 50 Hz. With a rated torque of 106 and an IP55 protection class, it offers protection against dust and water jets, making it ideal for industrial applications. The motor uses 0.15 liters of oil and weighs 15 kg, making it a compact and easy to install solution. Other technical features include a power factor of 0.76 and an efficiency at load of 0.63 kW.

Condition: new, functionality: fully functional, machine/vehicle number: FDU1407/2210069 001, power: 0.75 kW (1.02 HP), rotational speed (min.): 1,440 rpm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 16 kg, torque: 45 Nm, protection type (IP code): IP55, Siemens gear motor as good as new. It is versatile and can be used well in industry due to its robust construction. Dust and water resistant. Dcjdpeurli Esfx Anfjg Insulation class F; maximum operating temperature for the windings is 155 °C The motor is equipped with a thermistor (TP-PTC). The electric motor is a compact and reliable drive motor with an output of 0.75 kW at 230/400 V and a current of 3.11/1.79 A. The motor is designed for continuous operation (S1) and operates at a rated speed of 1440 rpm at 50 Hz. With a rated torque of 106 and an IP55 protection class, it offers protection against dust and water jets, making it ideal for industrial applications.

Condition: new, functionality: fully functional, machine/vehicle number: FDU1704/2368302 002, power: 0.55 kW (0.75 HP), rotational speed (max.): 1,440 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 41 kg, torque: 4 Nm, type of cooling: air, protection type (IP code): IP55, The Siemens geared motor is a powerful and reliable drive solution that is ideal for a wide range of industrial applications. With its compact design and robust construction, this geared motor offers high efficiency and durability, even under demanding operating conditions; the motor is both water and wind resistant. It is equipped with a high-quality electric motor that delivers excellent performance and high torque with low noise levels. The integrated gear unit ensures optimum adjustment of the speed and torque, making the motor versatile - whether in conveyor systems, mechanical engineering or automation technology. Thanks to advanced Siemens technology, the geared motor ensures high energy efficiency, resulting in reduced operating costs and more environmentally friendly use. Easy installation and maintenance make it a practical choice for any operation. Dcsdpourv Ufsfx Anfsg

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. Dcodjy N Eivopfx Anfjg The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: new, Maximum grinding length 3200 mm Work area (length*width) 3180*180 mm Grinding wheel size 200*100*32 mm (can be customized) Dcedpfx Aney Hgw Ajfjg Rail: Machine guide rail with wear-resistant strip Cooling system: Water tank with integrated water pump for spray circulation cooling Grinding precision ≤0.05 mm/m Operating voltage: 380V 50Hz Machine spindle reciprocating speed: approx. 17 m/min Grinding head drive type: Belt drive Grinding head motor power (custom grinding machine motor): 4.0 kW Traverse motor power: 0.75 kW Water pump power: 0.125 kW Total power: approx. 5.5 kW Total weight: approx. 2800 kg Overall dimensions: 5350*1300*1300 mm CE certified

Condition: refurbished (used), functionality: fully functional, pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 60 l, Equipment: type plate available, The Symex CML 500 is a high-performance vacuum homogenizer mixer designed for producing demanding products in the pharmaceutical and cosmetics industries. This system combines mixing, dispersing, homogenizing, heating, cooling, and vacuum processing in a closed unit, enabling precise and reproducible production—from pilot scale to industrial applications. Such systems are specifically engineered for complex processes with stringent quality requirements. Technical Highlights of the Symex CML 500: Tank - Usable volume: approx. 500 liters - Total volume: approx. 780 liters - Minimum volume: approx. 125–160 liters - Product space pressure range: -1 / +2 bar - Product temperature: up to approx. 133 °C - Heating jacket: up to +4 bar / 151 °C - Design in accordance with AD 2000 - The tank is fully pressure and vacuum-resistant, ensuring safe operations under demanding conditions. Agitator - Anchor agitator with flow breakers - Speed range: approx. 11–66 rpm - Power: approx. 7.5 kW - Frequency-controlled - Designed for highly viscous products - The agitator provides uniform mixing and optimal heat transfer. Homogenizer - Power: approx. 16–20 kW - Speed: up to approx. 3,000 rpm - High shear performance for fine dispersion - Rotor/stator system - The homogenizer ensures stable emulsions and reproducible product quality. Vacuum System - Operation under vacuum possible - Liquid ring vacuum pump (external) - Pressure and vacuum monitoring - Vacuum operation significantly reduces air entrainment and improves product quality. Heating & Cooling - Double-walled vessel (2-zone heating) - Precise temperature control - Even heat distribution - CIP system Multiple CIP Connections - Rotating spray heads (360°) - Cleaning of the entire process chamber, including pipelines Dcjdsy Hq I Sepfx Anfeg Material Feed - Direct suction of liquids and powders - Feed into the homogenizer area - Fast and low-loss processing - These integrated feeding and circulation systems enable highly efficient process management. Additional Equipment - Hydraulic lid lifting device - Multi-nozzle with several connection options - Sight glass with double wiper - Vessel lighting - Dosing vessel (approx. 8 liters) - Sampling valve - Membrane and disc valves - Circulation piping for homogenization and CIP Control & Operation The system features a modern operation concept: - Touch panel control - Adjustable speed and cycle times - Process monitoring (pressure, temperature, speed) - Automatic and manual operating modes - Alarm and safety functions Advantages of the Symex CML 500 - Combination of all process steps in one unit - High process reliability through enclosed design - Reproducible and stable product quality - Suitable for highly viscous and sensitive products - Hygienic design (GMP-compliant) - Flexible application for different batch sizes Delivery & Handling - Delivery ex works - Turn-key project available (incl. commissioning) - International shipping possible

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Dcjdpfxjy Eizue Anfjg Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 01/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,832 mm, loading space height: 1,626 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 5-seater double cab with partition * MAN TGE Individual Lions special paintwork * Hill start assist * Emission standard, EU6e (EC) * Preparation for tow bar * One front towing eye * Driver and passenger airbags, with deactivation option for passenger airbag * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swivel to the side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors left and right, convex, with integrated LED indicators and wide-angle section * All-wheel drive 4x4 Dcjdpfxeyx Ru No Anfeg * Emergency braking assistant * Battery 520 A (92 Ah) * Rubber flooring in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Rear axle differential lock (manually engageable, mechanical) * Electronic immobilizer * Park steering assist with park distance control including flank protection * Entry handles on rear pillars * USB Type-C data and charging sockets with increased charging capacity * Daytime running lights with assist function and coming/leaving home feature * Electrical terminal block and KFG with trailer programming * Premium interior noise insulation * With UNECE CS&SU * 4-cylinder diesel engine 2.0L Aggr. 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable cover, illuminated * "Climatronic" air conditioning in cab * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Traffic sign recognition * Reversing camera system with dynamic guidelines * High beam assist "Light Assist" * Heated leather multifunction steering wheel with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue warning * MAN SmartLink * 4-cylinder diesel engine 2.0 l/130 kW (4V) BIT * Fog lights including cornering light * Navigation system (Baseline) * MAN Connect * 4 alloy wheels 6 1/2 J x 17, with 1,200 kg load capacity, black * MAN Media Van Navigation Business (12.9 inch) * 12V socket, cup holder * Tire pressure monitoring system * Tires 235/60 R17C 117/115 R, optimized for rolling resistance * Standard wheelbase 3,640 mm * 3-point automatic seat belts with height adjustment * Rear wing doors with increased opening angle * Heat-insulating glazing * 12V sockets in the cab * "ergoActive" suspension seat left * "ergoActive" suspension seat right * Belt control, electronic contact in buckle, driver and passenger seat * Seat covers in fabric "Toronto Grid" * Heated driver and passenger seats, individually adjustable * 2 remote keys * Approved as 3.5t * Start-stop system with regenerative braking * Crosswind assist * Headlight cleaning system, washer fluid level indicator, heated washer jets * Intermittent wiper control with light and rain sensor * Keyless Go with SAFELOCK * Turning assistant * Emergency assistant (active lane keeping assist and Emergency Assist and Traffic Jam Assist) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * Partition wall, with cladding * Step lighting * Digital radio reception (DAB+) * Front axle (1,800 kg load capacity) * Comfort telephony with LTE and wireless charging * Lashing rings for load securing * Laminated safety glass front windscreen with heat insulation, heated * Permissible gross weight 3,500 kg * Additional water heater,

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit Dedpfx Aey Aktmjnfscg interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A Dcsdjy Akpuopfx Anfjg complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG