Used Sonderbau Brush Binding Machine for sale (67,223)

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate Gedpetr Avijfx Al Sjkc suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: good (used), Year of construction: 1999, 4 SIDE BRUSH SANDER Gkedpfx Alez R D Dwo Sjc Conveyer belt with adjusteble speed Configuration : top/buttom/Left/right Maximum working width/hight : 150 x 100 mm 2 x driven roller before and after left/right heads 2 x brand new conveyer belts included

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Gksdpfxezux Iyj Al Sec Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Gsdpfx Alexftqdo Sokc Prototrak SMX CNC Control,

Condition: new, Year of construction: 2025, functionality: fully functional, Scope of application This machine can be applied to hard-shell hardcover book, soft book, card book, etc., with high precision, book square, lining paper glue uniform, three sides of the drift consistency, to overcome the characteristics of uneven glue, CAM structure at the same time on both sides of the glue, can achieve the cartoon book side to retain a centimeter empty, shell positioning accuracy, to ensure the consistency of products. Features of the machine 1, using Delta PLC control system; 2, Delta servo control motion system; 3, weinview touch screen operating system; 4, anti-scratch shell cover system; 5, the back automatic positioning structure system; 6, quickly replace different sizes of product structure system; Machine speed 6-12 copies/min Machine size 2390x1000x2060 Power 3kw Maximum size 330x300mm Minimum size 150x60mm Gkedpfx Alsyzdu Ue Sjc Machine weight 750kg

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: Gkjdpfsum Hufjx Al Ssc * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 337, Kolbus DA 260 case-making machine - Device for applying inner lining with hot glue - Automatic case counter - Single case request for control purposes, initiated from the operating side - Infinitely variable drive - Safety standard compliant with CE directives and specifications Technical data: Size range of open case: min.: 205 x 140 mm max.: 670 x 390 mm Joint width: 4 – 15 mm Width between boards: 14 – 120 mm Turn-in width, closed: 8 – 15 mm Cloth: width: 223 – 708 mm height: 130 – 428 mm Boards: thickness: 1 – 4 mm width: 95 – 328 mm height: 140 – 390 mm Board center strip: thickness: 1 – 4 mm width: 6 – 90 mm Gsdez Hlywjpfx Al Sokc Center strip roll: thickness: 0.3 – 0.6 mm width: 6 – 90 mm Inner lining dimensions, dependent on glue processing: width: 195 – 670 mm height: 130 – 390 mm Do not hesitate to contact us for more information. The machine is still in production.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,530 mm, total width: 928 mm, total height: 1,800 mm, overall weight: 750 kg, type of input current: three-phase, power: 5 kW (6.80 HP), warranty duration: 12 months, workpiece height (max.): 70 mm, workpiece width (max.): 2,000 mm, workpiece length (max.): 9,999 mm, operating speed: 166 mm/s, KAMA Kantenschleifmaschine, Baujahr 2026, Lieferung ab Werk Die KZM 3 Kantenschleifmaschine wird zum Schleifen der Kanten von Türen, Abdeckungen und modularen Möbelteilen eingesetzt. Dank der flexiblen und beweglichen Schleifeinheiten lassen sich Roh- und Grundierungsschliffe an geraden, abgeschrägten und radialen Kanten einwandfrei durchführen. Die Scheibenbürstenschleifeinheit mit einstellbarer Höhe, Abstand und Drehzahl schleift den Radius oder die Ecken der Kante. Godpfx Aszz Htksl Sjkc Das aus 2 Exzenterschleifmotoren bestehende System wird zum Roh- und Grundierungsschliff von geraden Kanten eingesetzt. Dank seines oszillierenden Betriebs sorgt es für einen wirtschaftlichen und qualitativ hochwertigen Schliff. Die Anpresskraft sowie die Versätze am Schleifbeginn und -ende lassen sich automatisch einstellen. Die Positionen aller Schleifeinheiten und der oberen Andruckrollen werden manuell eingestellt. Die Drehzahlen des Förderbands, des Exzenterschleifers und des Bürstenschleifers werden über den Touchscreen eingestellt.

Condition: new, Year of construction: 2025, Working width: 800 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately Gedogfm D Nepfx Al Sekc 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: Handwheel Height indication: Mechanical counter Feed rate: 4 - 12 m/min Motor power, brushes: 2 x 5.5 kW Motor power, feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Weight: 950 kg

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Godpfx Alsyw Rnye Sokc Motor power: Kw 0.19 - Max useful working width mm 3500

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Gsdpfx Asyw Rpqjl Sekc - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW Gjdsyw Rqhopfx Al Sekc - Max working width mm 1300 ca. - Built-in control panel

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 Gsdeyw Rqzopfx Al Sskc - Max working width mm 2000

Condition: good (used), Min. Pipe length: 100-1800 mm Gksdpfx Aleq U Rcce Sjc The system was previously used for deburring cut pipes!

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES Gkedpjx Rn Tysfx Al Ssc - S/N 177 - Year 2000

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, adjustable separately 1. Brush: Metal brush, diameter 220 mm 2. Brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power for brushes: 2 x 4 kW Gkodpfx Alod Ry Dte Soc Motor power for feed: 0.37 kW Machine length: 1400 mm Machine width: 1200 mm Weight: 650 kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Gkjdjd Ry Dropfx Al Sec Units: 2 brush units, adjustable separately 1. Brush: Metal brush, diameter 220 mm 2. Brush: Tynex brush, grit 80, diameter 220 mm Right/left rotation: for both brushes Height adjustment: handwheel Height indicator: mechanical counter Feed rate: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 220 mm Minimum workpiece length: 250 mm Gedpfegrladsx Al Sskc Units: 2 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Tynex brush, grit size 80, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brush: 3 kW Motor power, feed: 0.37 kW Machine length: 1400 mm Machine width: 1400 mm Weight: 550 kg

Condition: new, Steel aging brush, gold color, 600 Outer diameter: 210 mm Inner diameter: 40 mm Gedpfezvmt Hjx Al Sokc Brush width: 600 mm Available grit sizes: 36-150 We also offer brushes with a width of 400 mm.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, Gjdpfx Alszqr Hns Sokc coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Godpfxsz N Ambo Al Sskc Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: Gedpou Rnb Nsfx Al Sskc - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Gksdpjff Hdgsfx Al Sjc Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Edge folding machine with stop Programmable for up to 20 edge folds. Gedpfoy Uh Uxox Al Sekc

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE Gksdpfx Aezdyx Sol Sec THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.