Used Stc Super 65 for sale (8,668)

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Machine equipped with an extra-large machine table with double T-slots parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition Bdsdpswfymzjfx Al Aeh

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 10,539 h, load capacity: 4,000 kg, lifting height: 6,500 mm, fuel type: gas, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,315 mm, fork length: 1,600 mm, empty load weight: 7,550 kg, total length: 4,120 mm, drive type: Treibgas, construction width: 2,400 mm, Sideloader Load center of gravity: 800 Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this HX40/16/65. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Bedov U Erpopfx Al Aedh Heating, full cab, Olatform height: 850 mm

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Bsdpjxfwflefx Al Ajdh Subject to prior sale!

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 4 TRAILERBANDEN 8,9 EN 12 MM PROFIEL DIEPTE. Bdsdsx Ahf Repfx Al Aoh

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Bdedpox Ah Ewjfx Al Ash

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Bdjdpfx Aloxl Dp De Aoh Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim Bedpfx Alsw Nac As Ajdh

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve Bsdpfx Aljwmq H Uo Aedh -Manufacturer: Helmet, running rail helmet rail -Type: Width 65 mm -Lengths: 1x 4000/3190/2000 mm each -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 4000/230/H80 mm -Weight: 85 kg

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 5,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,150 mm, fork length: 1,200 mm, drive type: Diesel, Sideload forklift Bsdpeyhilkjfx Al Aedh Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Bdedpfx Alsymmgis Ash Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, maximum load weight: 26,800 kg, overall weight: 32,500 kg, axle configuration: 2 axles, first registration: 01/2009, next inspection (TÜV): 06/2026, loading space length: 7,400 mm, loading space width: 2,350 mm, loading space height: 1,400 mm, loading space volume: 24 m³, Equipment: ABS, * ABS * Folding underrun protection * 5-chamber rear lights * Alloy wheels * BPW ECO-Plus axles * Disc brakes ----Body: half-pipe steel rear tipper, capacity approx. 24 m³, tailgate, galvanized vehicle frame, Wabco SmartBoard. Bjdpfjyu D I Tsx Al Asdh Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our general terms and conditions (see imprint).

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m Bodpfx Alsy Ralnj Asdh

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm Bdodpfov D Nvdox Al Aeh -Total weight: 27 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 Bjdpfxsxqch Aj Al Aedh X - Y - Z travel : 650 - 500 - 500 mm. RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Control : MILL PLUS Syncronspindle Hand wheel for axes travel Interface RS-232 C Coolant

Condition: new, Year of construction: 2020, functionality: fully functional, final pressure: 10 bar, input voltage: 400 V, Nominal diameter DN 65 Delivery head H max. 34 m Operating pressure max. 10 bar Supply voltage 3x400 V Frequency 50 Hz Rated current 13.2 A Bedpfx Ajrq Ey Iol Ajdh Motor protection WSK

Condition: refurbished (used), Hydraulic pump, Sperry Vickers Bsdpfx Asd Szm Tel Ajdh Type: GPA2-10-E-30-R-GE 334 with attachment, gear motor coupling, Leroy-Somer from Kupplungstechnik

Condition: new, Year of construction: 2026, Genie AWP-30S (AC) personnel lift with 10m working height, new, used - demonstration units available Bdodpfx Alorpzftj Ajh

Condition: excellent (used), mileage: 474,800 km, power: 353 kW (479.95 HP), first registration: 05/2022, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 38,000 mm, fuel: diesel, fuel tank capacity: 1,275 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, second fuel tank, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Lane departure warning system - Radio and audio system - Disc brakes - Side skirts - Sleeper cab - Speed limiter - Mirror heating - Stability control - Auxiliary heater - Sun visor = Specifics = XLRTEH4300G392338 = More information = Bedpfxjzlpn Sj Al Ajdh Transmission: TRAXON, 12 gears, Automatic Brakes: disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 40%; Suspension: leaf spring suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 50%; Tire tread depth right inner: 40%; Tire tread depth right outer: 50%; Suspension: air suspension Number of cylinders: 6 Engine capacity: 12,902 cc Load compartment volume: 1,275 l Technical condition: very good Optical condition: very good

Condition: like new (used), functionality: fully functional, Year of construction: 2023, The RM Super Rain 890 GX 110/550 is a hose reel irrigator (reel system) from the Super Rain / GX series by the Italian manufacturer RM Irrigation. The designation 110/550 refers to a hose with a diameter of 110 mm and a length of 550 m. It is designed for irrigating large agricultural areas. Bdodjxgha Njpfx Al Aeh

Condition: ready for operation (used), Year of construction: 2024, laser power: 3,000 W, number of axes: 5, Tube cutting machine manufactured in 2024. This Bodor T2-65-3000W features advanced technology for efficient cutting operations. If you are looking to get high-quality tube cutting capabilities, consider the Bodor T2-65-3000W machine we have for sale. Contact us for further details. Bdsdpfszl Ur Ajx Al Ash Model T230Tube size range Round tube：φ8-φ230mmSquare tube ：□8-□230mmRectangular tube 230mm≥Side length≥8mmI-beam 10#-14#Requirements for tubesDiameter＜φ50mmWall thickness of tubes≥1.2mm；Diameter≥φ50mmWall thickness≥2.5% of Diameters of tubesPneumatic chuck maximum load 300kg 46kg/mMaximum machinable tube length 6500mmMaximun unloading length 4500mmShortest remaining material 80mmLaser Power / Brand 3000W BodorPositioning Accuracy 0.05mmRepositioning Accuracy 0.03mmMax. Acceleration 1.5GMachine overall dimensions12650mm×2350mm×2500mmOverall weight 5060kg

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Bjdpfx Alstva Sgj Asdh Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Bodpfjwq Hp Tex Al Ajdh Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, mileage: 68,000 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,450 mm, loading space volume: 14 m³, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Reference Number: #210 MAN TGS 28.510 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with powerful Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and jetting operations, combining high suction power, effective water recycling, and robust high-pressure technology in a durable, user-oriented configuration. With a 14,000 L tank capacity, 3,000 m³/h vacuum power, large-diameter DN150 suction line, and a high-performance Uraca high-pressure system, this recycler is ideally equipped for demanding municipal and industrial applications. Extensive operating, comfort, and safety features enable efficient workflows even during long periods of use. Body: * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000-liter tank capacity * 1,000-liter fresh water * 5,000-liter jetting water * 8,000-liter sludge compartment * Discharge by tilting tank up to 45° Vacuum System: * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h * Galvanised DN150 pipework * Approx. 20 m suction hose DN150 High Pressure System: * Uraca P3-45 65 413 liters/min at 175 bar * Approx. 160 m HP hose DN32 * Hydraulic jetting hose reel with approx. 80 m DN13 Additional Fresh Water Unit: * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring rewind hose reel with 15m pressure hose DN10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Suction and HP booms * 5-liter heated hand wash * Stainless steel toolbox * Operator control cabinet with display * Engine start controllable from cabinet * NMV start controllable from cabinet * Radio remote control with display * Equipment cabinet with two doors – both sides accessible * Hose storage rack * Extended soundproofing for pump compartment * LED work lights * Central lubrication system Technical Data: * Unladen weight: 18,385 kg * GVW: 26,000 kg * Length: 10,100 mm * Height: 3,450 mm * Width: 2,550 mm Bdodoydhh Nopfx Al Ash Chassis: * MAN * TGS 28.510 * 6x2 * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning * Self-propelled working machine — sewer cleaner Conclusion: An extremely powerful MAN TGS 28.510 6x2 equipped with Wiedemann Super 2000 water recycling body, advanced vacuum and high-pressure technology, and thoughtfully designed operator and comfort features. The ideal solution for professional sewer cleaning companies who place value on efficiency, performance reserves, and rugged technology. For further details and/or pictures, please contact us directly. A wide range of additional vehicles for SALE or RENT can also be found at: Changes, prior sale and errors excepted. The purchaser is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and excludes any warranty.

Condition: used, mileage: 158,175 km, power: 301 kW (409.25 HP), first registration: 09/2004, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, air conditioning, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal number: #667 Wiedemann Super 2000 water recycling unit MAN TGA 26.410 6x2 Superstructure * Wiedemann enviro tec, stainless steel * Water recycling unit, 6.0 / 5.0 / 2000 * Approx. 12,000 liters total volume (air), of which 6,000 liters sludge / 5,000 liters flushing water volume * Unloading: Tipper * CAN control with wireless remote control * Outrigger arm (telescopic) with suction and flushing hose guide High-pressure system Uraca KD 716-G REC * 170 bar at 333 l/min * Flushing hose 1: approx. 150 m, reel for approx. 200 m DN 25, mounted on the outrigger * Flushing hose 2: approx. 60 m * Flushing hose 3: approx. 20 m Vacuum system * Wiedemann enviro tec * Approx. 2,000 m³/h at 1,300 rpm * Rotary vane pump * Suction hose approx. 6 m, reel on the tank, dirty water can be pumped out via the suction hose Special features * Equipment cabinet on both sides with two flaps * Soundproofing cladding in front of the pumps, extended upwards on the left and right * Tool box 2x aluminum * Advertising boards L+R integrated into the side paneling * Rotating beacons: cab 2x, superstructure 2x * Work lights: 2 halogen lights at the rear * Trash can / scrap box, vise, hand washing facility available * Air conditioning Technical data * MAN TGA 26.410 * 6x2 * EURO III Bdedpfx Alszp Dawe Ash * 409 hp / 301 kW * Manual transmission * Fuel tank: approx. 300 l * Color: Orange * Tare weight: 16,705 kg * Length x width x height: 9.74 m x 2.55 m x 3.50 m * First registration: 13.09.2004 * Mileage: approx. 158,175 km For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively under our general terms and conditions and with the exclusion of any warranty.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Bdedpfowiqukox Al Aeh Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.