Standing panel saw

Holz-Her 1230 Super Cut

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Ncodpfx Aexxpgbsbvop Machine dimensions: 435×160×235 cm (H)

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Ncedpfsvvkq Tox Abvjp

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Nodpfeu Rqq Hsx Abvscp Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Njdpfjydql Dex Abvecp

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Ncedpfx Abjwka S Ievop Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve Nedjh U Damopfx Abvscp table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Ncjdpfoxwp S Isx Abvep Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 alternate top bevel teeth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Measurement readout for: - horizontal cuts: via scale and strip cutting stop - vertical cuts: via scale from 0 - 1,300 mm Ncjdpfx Abjwka Ntjvep Extraction port: 100 mm 5 material support rollers per meter of cutting length 1 infeed and 1 outfeed roller Pneumatic workpiece clamping device between the support rollers 1 central support element per meter of cutting length Twist-resistant, freestanding machine frame Pneumatically retracting slatted frame Round bar guide vertical and horizontal Fine-adjustable folding stop Fine adjustment for horizontal cuts via handwheel Strip cutting stop Manual programming rail with 5 T-nuts Pneumatic plunge of the saw unit Pneumatic saw head lock Control unit at the saw assembly: start button, stop button Operator panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swiveling saw head Location: Flörsheim Availability: short-term

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Ncsdpfsxtbtpox Abvsp Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: used, 0 0,4 - 5,0 mm Njdpfx Aowgwl Dobvjcp Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...