Used Tec Tec Conveyor for sale (14,954)

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) Ijdpfx Aoy Iwd Ajb Sotg - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Operating hours: Itjdpfx Aoy Iwdvob Ssg

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Iodpfx Abjdzqpts Sotg Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC Itjdsdzqb Ejpfx Ab Sjg TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: ready for operation (used), The subject of my auction is a conveyor belt with a length of 31 m and a belt width of 1 m. Itedper D N Hkofx Ab Ssg

Condition: ready for operation (used), The item for sale is a conveyor belt approximately 7.5m long with a belt width of 0.8m. Very strong and solid construction. Possibility of transport. Itodpfx Abswdmvgs Sog

Condition: ready for operation (used), The subject of my auction is a Conveyor belt 11m long, belt width 0.65m Possibility of transport. Possibility of transport. Itodpfsw Dx Sysx Ab Sjg

Condition: excellent (used), 1 x Incline conveyor. Located Melksham. Lift out £30. UKFM1-6799 Iodpfx Abexc H Nbe Sotg

Condition: excellent (used), REF: MM6164 Isdpew H I Agjfx Ab Sotg 1 x Inclined conveyor with height adjustable feet, single-speed. Previously used as an outfeed conveyor for a VFFS bagging machine.  Technical specification ⚙️ ✅ Belt diameter - 2950mm long x 250mm wide. ✅ Infeed height - 350mm.  ✅ Outfeed height - 850mm.  ✅ Overall dimensions - 2950mm long x 450mm wide x 850mm high. ✅ Electric supply - 240 V / 50 hz / 1 phase.

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2006, Empty weight: 4.770 kg Axle 1: left 10 mm right 10 mm Ijdpfx Aboyiuave Sotg Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte Iodpjyq Ufusfx Ab Setg * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights Iodpfsyq Ufzox Ab Sstg * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h Iedpfsyq Ufnex Ab Sstg * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Ijdpfeiid Hwex Ab Sotg Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures, length 4m. Belt width approximately 0.3m. Ready for use. Feel free to contact me for more information. Itodpfx Abeyvg Aqo Sjg

Condition: excellent (used), roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1" x 17.02 -Quantity: 23 x pieces packages available -Price: per package Itsdpfx Ajb A Niqob Seg -Package weight: 14 kg/piece

Condition: good (used), Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control Ijdpfxsiiigpo Ab Sstg -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg

Condition: good (used), diamond core drilling machine -Drill stand -vacuum pump Itedpob A H U Aefx Ab Seg -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available Ijdpfx Abecbki Uo Sstg -Price: per package -Weight complete: 7.6 kg/package

Condition: used, Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 "inches -Width: 125 mm Iodpfx Abec Ibypj Sjtg -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available Itedpfxscbkkbj Ab Seg -Price: per package -Weight complete: 11.5 kg/package

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures, approximately 3 meters long. Please contact me for further information. Possibility of transport. Iedpfx Aey D Epxeb Sotg

Condition: used, axle configuration: 3 axles, first registration: 08/2006, color: other, Year of construction: 2006, Empty weight: 5.600 kg Ijdpfew Rn Hfox Ab Sjtg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Itedpfx Abexvybds Seg Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: ready for operation (used), I am selling the conveyors shown in the photos. The price is for 1 piece. Please feel free to contact me. Possibility of transport. Itjdpjy Dmucsfx Ab Sjg