Used Telemecanique Proximity Switch for sale (6,263)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Knodpfx Asz Ag Rrjqijb - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Kedpsz Agw Eofx Aqionb - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA Knedexrnwlepfx Aqijb MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Kedpew Uan Aefx Aqijnb Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,600 mm, total height: 1,450 mm, fuel: diesel, overall weight: 1,495 kg, continuous power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), cubic capacity: 5,320 cm³, fuel tank capacity: 240 l, battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance – everything must go! HELVETICA POWER ® 125 KVA / 100 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new goods!!! Ksdpfx Ajzwfpijqienb ⭐️ "Diesel engine by RICARDO ("KOFO" Premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, Noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the Premium series – a top-of-the-line device with top components. Warranty · Guarantee · Service ⭐️ One-year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge - worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heating ⭐️ individual configuration is possible at any time Technical data Rated power: 100KW/125KVA 50Hz 220V / 400V - three phases water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2600x1150x1450mm Weight: 1495kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, pay attention to the relevant guidelines to be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup power supply, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small unit, industrial unit, professional generator, high-performance unit, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power device, emergency power device, diesel unit, construction site unit

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm Knodpfsk Aa Ebsx Aqiob conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782. Knjdpszzvgtefx Aqijb

Condition: like new (used), Measuring range: 450 bar Signal output: 4...20mA Operating voltage: 24...32VDC Serial number: 232A4451 Width: 126 mm Height: 145 mm Depth: 75 mm Weight: 837 g Knodpjypb I Tsfx Aqiob Condition: Like new

Condition: used, Year of construction: 2006, operating hours: 1,363 h, functionality: fully functional, power: 15.45 kW (21.01 HP), fuel type: diesel, color: green, axle configuration: 2 axles, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2100 Used Egholm 2100 All-wheel drive, 21 hp diesel engine 2-cylinder steering system, Version 2 Cab 2100 Cruise control Lighting and mirrors Kjdpfx Aqszdtxloionb for cab and compliance with German Road Traffic Licensing Regulations (STVZO) Type approval certificate (ABE) Three-way valve with automatic switching Ball/drawbar coupling Socket, 7-pin Independent brush speed Doors with sliding windows Handheld suction hose for sweeping and suction container FST 400 Front sweeper Subject to changes, printing errors, and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. Knedpezzvf Asfx Aqisb The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Ksdpszd Uubefx Aqijnb Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,000 rpm, total length: 1,000 mm, total width: 800 mm, spindle mount: MK 2, type of input current: three-phase, The three-phase 380-volt motor is running smoothly. Geared headstock, with gears running in oil. Six spindle speeds are adjustable from 120 to 2000 RPM. Head height and angle are adjustable. MT2 spindle taper. Power table feed with three adjustable feed rates: 33-65-170 mm/min. Maximum distance between table and spindle: 375 mm. Cross table dimensions: 630x150 mm. Adjustable LED machine light. Emergency stop switches. Overall in good condition. Made in Austria. Kedjzycpropfx Aqijnb Dimensions: 80x100x185 cm. Includes all accessories as shown in the pictures, located on the floor next to the machine. Contact us for shipping options! €2,650.00

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) Knedpfxjzzvhde Aqieb • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue Knsdpsztl Scsfx Aqisb - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Weight: 4500 kg Ksdpsd Ad A Eefx Aqionb Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), Coil: 24VDC Application: Safety circuit Width: 90 mm Height: 87 mm Depth: 120 mm Weight: 515 g Kedsytprbspfx Aqionb Condition: Like new

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Knedpfx Aqoz Diq Ujiob Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Kodpfjtwgk Ajx Aqionb Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2018, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for printing companies that need to switch flexibly between rigid sheet materials and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine color gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color space: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Condition: Technically and optically in good condition. The machine operated exclusively in a single-shift operation and was regularly maintained. Availability: Available from [immediately] or by arrangement. Location: [83410 Laufen D] Kodpoz Dr T Ssfx Aqisnb Scope of supply: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). Inspection and print tests on site are possible by prior appointment. More pictures or information available on request.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Knsdpfxsxt E Hto Aqisb -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0402 -Number: 7x Port Probe Switch available -Price: per piece -Dimensions: 240/145/H45 mm / 240/180/H50 mm -Weight: 1.2 kg / 1.4 kg

Condition: like new (used), Coil: 24VDC 3n/01n/c Application: Safety circuit Width: 90 mm Height: 87 mm Kodpfxsytp H Ej Aqienb Depth: 120 mm Weight: 411 g Condition: Like new

Condition: like new (used), Coil: 24.0 VDC / 4.5W Application: Safety circuit Width: 45 mm Height: 87 mm Depth: 120 mm Weight: 364 g Knedpfx Aqoytr Avjieb

Condition: like new (used), Coil: 24.0V AC / 5.5VA 50-60Hz Area of application: Safety circuit Width: 90 mm Height: 87 mm Depth: 120 mm Kedpfsytpi Hsx Aqionb Weight: 504 g Condition: Like new

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; Knsdpfx Aqjygxc Ajieb - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 54,500 mm, fuel: diesel, gearing type: automatic, emission class: euro3, Year of construction: 2025, Equipment: ABS, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, = Additional options and equipment = - Heated mirrors - Leaf suspension - Differential lock - Air conditioning - Air-suspended seats - PTO = Notes = Mercedes-Benz Arocs 5 4542 8x4 Euro 3 Concrete pump EuromixMTP SWAN TSP 47-5 160RZ - NEW – without registration – Vehicle equipment: Engine OM460, inline 6-cylinder, 12.8 l, 310 kW (421 hp), 2100 Nm Euro 3 Transmission G 280-16/11.7, 7-0.69 Front axle 9 t – Rear axle, crown wheel 300, planetary, 13.4 t Permissible weight variant 41.8 t (7.5/7.5/13.4/13.4) Wheelbase 5450 mm Cab S-Cab Classic Space Disc brakes on front and rear axles Tank 290 l, left side, 735 x 700 x 750 mm Rear wall of cab with window - tinted windshield Roof hatch/ventilation flap External sun visor, transparent Multifunction steering wheel Classic cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle EUROMIX MTP – Concrete pump SWAN TSP 47-5 160RZ Model: SWAN TSP 47-5 160 RZ Section: Concrete pump: Max. theoretical concrete output: 160 m³/hr Max. theoretical concrete pressure: 85 bar Strokes: 30 per min Delivery cylinder: Ø2100 mm x Ø230 mm Main hydraulic cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve Water pump: 20 l/min – 170 bar Water tank: 800 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Changeover system: Magnetic sensor (proximity switch) Switch box: DIGITEX, waterproof Remote control: Scanreco remote + 30 m cable Section: Boom: Boom S 47-5 (boom with 5 sections, RZ folding) Type: RZ folding Max. vertical reach: 46.8 m (without end hose) Max. horizontal reach: 42.8 m (without end hose) End hose: 3m single flange, DN 125 Outrigger type: X-type Slewing ring: 365 degrees Slewing speed: 0.3 RPM Delivery line diameter: 125 mm (outer diameter 132 mm), 5.5" flanges & couplings Control system: ---- Distance between front outriggers: 8.6 m Distance between rear outriggers: 8.7 m For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по-русски Govorimo Srpskohrvatski = Further information = Kodpfx Aqsy D D A Rjionb Year of manufacture: 2025 Applicable material: Concrete Front axle 1: Steering Front axle 2: Steering Number of cylinders: 6 GVW: 45,000 kg Body manufacturer: EuromixMTP SWAN TSP 47-5 160RZ Pump: Yes