Used Ump Technika Wood Shredder for sale (9,249)

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) Nodeyhzhnopfx Adtecr PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run Nsdjyfw D Nopfx Adtocr

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Nedpfxovyp Avs Adtecr Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, Forestry shredder MORBARK WH3000XP is offered for sale, manufactured in 2022, in good condition with approximately 420 total operating hours. The machine is located in Valencia (Spain) and belongs to the forestry equipment category, making it ideal for shredding wood, plant residues, biomass, and other demanding forestry materials. The MORBARK WH3000XP is renowned for its high power, industrial reliability, and operational efficiency, specifically designed to withstand intensive loads in professional environments. Its hammer system ensures uniform, high-quality shredding, adapting to continuous operation with minimal maintenance required. Ncedpfx Aeyubmajdtor

Condition: used, Year of construction: 2023, operating hours: 2,650 h, functionality: fully functional, BRAND: ALBACH MODEL: Diamant 2000 YEAR: 2023 HOURS: 2650 1550 rotor REGISTRATION NO.: 100.23.XX-1 MAN engine 790 HP Ncjdpfeyubkrjx Adter

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Njdpfx Ajyubklodtecr Year of manufacture: 2025 Operating hours:

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Nedpfx Adeyubiujtocr

Condition: new, Year of construction: 2025, functionality: fully functional, SONDERANGEBOT! AUSVERKAUF! Neu mit Garantie Die Hammermühle MT-500 ist zum Zerkleiniern von Holzspänen, Sägemehl und Getreideabfällen konzipiert. Die Basis von Hammerbrechern ist ein Rotor mit darauf montierten Schlagelementen (Schläger, Hämmer). MT-500 Schlagmühle – Hauptvorteile Einstellbarer Mahlgrad des Materials; Die geringe Größe des Brechers ermöglicht den Einsatz auch in kleinen Räumen; Niedriger Energieverbrauch bei hoher Effizienz; Es ist nicht erforderlich, eine spezielle Basis zu bauen; Schneller Austausch von Sieben und Hämmern bei Bedarf; Möglichkeit der Zusatzausrüstung mit Zyklon; Zuverlässigkeit und Nutzungssicherheit; Option mit Zyklon +940 EUR Europäisches Produkt direkt vom Hersteller, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer. Nodjwi Itkjpfx Adtscr Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Ich freue mich auf Ihre Anfragen.

Condition: like new (used), Year of construction: 2025, Rotor diameter: 260 mm - Feed opening approx. 830 x 1100 mm Ncjdpfx Adjyat H Ajter - Rotor length: 830 mm - Motor: 18.5 kW - Hydraulic pusher - Single knife row - Chip screen - Low operating hours

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Ncsdpov Sqrpsfx Adtjr Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: Ncsded Dgw Uspfx Adtjr - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: good (used), Year of construction: 1996, operating hours: 1,000 h, functionality: fully functional, fuel type: diesel, bar diameter (max.): 600 mm, product height (max.): 150 mm, product length (max.): 10 mm, product width (max.): 150 mm, TECHNICAL DETAILS Machine type: Mobile auger chipper Nodpsvgb Hyjfx Adtecr Drive: Diesel engine Engine: 8 cylinder Scania Chassis: Tracked chassis Maximum trunk diameter: 60 cm Wood chip size: approx. 15 x 15 x 1 cm MACHINE DETAILS Length: approx. 9,000 mm Width: approx. 2,800 mm Height: approx. 3,600 mm Weight: approx. 16 t Operating hours: approx. 1,000 h Tank capacities Diesel tank: approx. 500 l Hydraulic tank: approx. 1,500 l

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: electric, Slow-speed shredder, rotor width: 800 mm, equipped with knives reversible 8 times. Motor power: 18.5 kW. Ncodpowy Nk Ejfx Adtsr

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,400 h, functionality: fully functional, Wood chipper DH600-18.5KW, rotor width 600mm, rotor diameter 222mm, 28 blades, concave, 4 brush cutters, hydraulic pusher, built in 2020, completely factory overhauled Ncodpfxev Iq Ebo Adtjr

Condition: new, Year of construction: 2025, power: 2.2 kW (2.99 HP), Holzspalter beschleunigen und erleichtern die Herstellung von Brennholz im industriellen Maßstab. Mit einer Leistung von 15 bis 30 m³ pro Schicht (8-Stunden-Arbeitstag) spalten sie alle Holzarten, einschließlich der Wurzeln alter Obstbäume. Jeder Holzspalter wird vor dem Lackieren und der Inbetriebnahme getestet, um höchste Qualität zu gewährleisten. Modell: DKPR-220 Spannung: 230 V Njdpfx Adjwhw E Tetscr Max. Stammdurchmesser zum Spalten: 500 mm Max. Stammlänge zum Spalten: 600 mm Spaltkraft: 12 Tonnen Maße: 2200 × 1200 × 1200 mm Gewicht: 225 kg Motorleistung: 2,2 kW

Condition: good (used), Year of construction: 2004, operating hours: 15,660 h, functionality: fully functional, color: orange, For sale: Doppstadt DZ 750 Kombi – slow-speed shredder + high-speed chipper. The machine is accident-free. - Year of manufacture: 12/2004 - Mercedes-Benz diesel engine - Operating hours: 15,660 mth - Weight: 46 t - Magnetic separator - Possibility to use different shredding screens - Machine after inspection/service Ncjdsygr Tnepfx Adtjr - Tyre condition: 70% - Tyre size: 385/65R22.5 - Easy operation The machine is in continuous use. Please contact for further information.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Ncedpexru Hysfx Adtjr Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: H10012282, Wood shredder, factory overhauled Cutting unit completely overhauled, new oils and wear parts Power rating: 22 kW Feed opening: 800 x 1200 mm Rotor working width: 820 mm Rotor diameter: 368 mm Rotor type: S-rotor Blade size: 40 x 40 mm Nsdpfx Adsvkgihotscr Number of blades: 42 Screen size: 12/15 PLC controlled Hydraulic tank capacity: 20 l

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Ncedpjx Sdw Rofx Adtjr Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Infeed opening : 1514 x 695 mm

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg Ncodsqy Ek Hepfx Adter

Condition: ready for operation (used), functionality: fully functional, For Sale: Massey Ferguson 7726 + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 135,000 (excl. VAT) Nsdpfx Aeylv Rzedtscr _____ 🚜 Massey Ferguson 7726 • Year of manufacture: 2017 • Engine hours: 8,170 • Price: EUR 60,000 (excl. VAT) • Power: 255 hp rated / 280 hp max • Front linkage • Front axle suspension • Air-suspended comfort operator seat (360°) • Regularly serviced • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • Load-sensing hydraulic pump: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift control • Electronic Linkage Control (ELC), 9,950 kg lift capacity • PTO: 540 / 1000 rpm • Air brake system for trailer _____ 🌲 MUS-MAX WT9XLZ Wood Chipper • Year of manufacture: 2009 • Operating hours: 12,170 • Wear parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • Fully operational – still in daily use

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Nsdpfxowzaize Adtscr Technical data upon request Required space approx. 2050 x 1550 mm All information without guarantee

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 13091 / 91, power: 7.5 kW (10.20 HP), fuel type: electric, filling opening length: 1,000 mm, filling opening width: 800 mm, working height: 1,600 mm, Wood shredder with new electric motor and new main bearings! TECHNICAL DETAILS Feed Feed opening: 100 x 80 cm Feed channel height: 160 cm MACHINE DETAILS Drive Main rotor motor: 7.5 kW Nedpfjw Ng Tzex Adtecr Connected load: 32 A EQUIPMENT Hydraulic drawer Almost as-new drawer slide guides New electric motor New main bearings

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm Ncedpjw H Rn Ejfx Adtsr - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. Ncedpfx Aev Tbqledtsr • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.