Used Clamping Press for sale (20,426)

Condition: new, pressure: 200bending length: 3200column width: 2700daylight: 400stroke lenght (max.): 200column throat depth: 350messurements (LxWxH): 37000 x 1700 x 2700weight approx.: 14.000 Cedpstvhxisfx Ab Dohb

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C Chedsxfwdopfx Ab Dob - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Chodo E Dqujpfx Ab Dob Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Cjdpfxeyn Sclj Ab Djhb Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Chjdeyr Tpnjpfx Ab Djb

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Codpfxsyr I Hnj Ab Djhb The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: excellent (used), Brand: MVD Model: D320-3700 Tonnage: 320 Tons Chodpfx Abow Hx S Se Deb Working width: 3700 mm Year of manufacture: 2021 Stroke: 410 mm Installation height: 615 mm Throat depth: 510 mm Controlled axes: Y1, Y2 and X+R+Z1+Z2+X5 axis Distance between uprights: 3200 mm Approach speed Y-axis: 210 mm/sec Control: Delem DA69T Safety: DSP Laser Safe Upper tool clamping: Wila NSCL hydraulic clamping Lower tool clamping: Wila NSCR hydraulic clamping and crowning

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate. Csdpfx Abjx Ehmys Dshb

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Cjdpov T Aqyjfx Ab Djhb Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm Codoxuhzcspfx Ab Dshb - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Chsdsvn D Tfepfx Ab Dob Machine Weight ... 18000 Kg

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder. Chedpfx Abowx R Rds Djb

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Chsdpfjxgpaqox Ab Dsb Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, working width: 2,500 mm, bending force (max.): 75 t, Refurbished machine Haco press brake, PPM type, 2.5m x 75T Chjdexanm Aepfx Ab Djb Control with + and - buttons Motorized back gauge, X-axis European standard type punches One-piece die

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Cedpfxoya Iaqo Ab Dohb Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Cedpfxoyabf Hs Ab Dshb

Condition: used, Hydropneumatic corner connection presses with support arms and new foot pedals Profile height max. 140 mm Stanzhöhe max. 93 mm Punching hub: 15 mm Presskraft 45 kN Cedpfx Abozrmcms Dshb Weight approx. 280 kg

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min Chsdezrpn Sepfx Ab Deb distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm Codpfozrpqmsx Ab Dshb ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1985, pressure 40 t Csdpfx Abszrptbe Dehb distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 200 mm/s speed up 200 mm/s working speed 20 mm/s oil volume 115 l power requirement 5,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Chedpfxjzrptnj Ab Deb Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Chedpfx Aszrpt Ieb Dsb Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: ready for operation (used), Year of construction: 2022, Hongming HM-950 continuous roller pressing and flattening machine, suitable for the production of hard covers, book covers, folders, presentation materials, rigid boxes, and other glued cardboard or paper products. The machine continuously feeds the material through a large pressure roller via a conveyor belt. This ensures an even pressing result, improves adhesion between the glued layers, and helps to remove trapped air bubbles and irregularities. The pressure and working height can be adjusted manually on both sides of the machine. Technical specifications: * Manufacturer: Hongming * Model: HM-950 * Machine type: Roller pressing and flattening machine * Year of manufacture: June 2022 * Working width: Approx. 950 mm * Serial number: J01010089-0026 * Voltage: 380 V * Frequency: 50 Hz * Current: 3.4 A * Motor power: 0.75 kW * Power supply: 3-phase * CE marked Suitable for: * Hard-cover production * Bookbinding and book-cover production * Rigid-box and luxury-box components * Greyboard with glued covering paper * Folders and presentation covers * Cardboard and paper converting * Pressing and smoothing of glued materials Chodpfx Abezq Tz Te Dob Condition and equipment: The machine is in clean overall condition and appears complete. It is equipped with a continuous conveyor belt and a large covered pressure roller. The original English-language operating manual is included. Inspection is possible by appointment.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Roll divider WP Rotamat EN Dough divider and rounding machine Stationary machine, 30 portions, ideally suited for dividing and rounding dough with plastic knife head, connection 400 V, 16A-CEE plug, Chedezq Uw Nepfx Ab Dsb dimensions: 650 x 670 x 1610 mm, W x D x H Used machine

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Chsdpfx Abjzpxt Eo Deb Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.