Used Co2 Incubator for sale (763)

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • Directional spindle stop S1 Additional Equipment available (Pictures 17-21): • Equipment to be equipped with Robobar SSF 3 m loading magazine • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars Kodpfx Aex D D Ikel Nolu • 2 different hybrid drums Technical Specification Counter Spindle Yes

Condition: good (used), mileage: 424,227 km, power: 355 kW (482.67 HP), first registration: 11/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,600 mm, total width: 2,550 mm, total height: 4,110 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd Diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - LED lamp - Manual - Radio/cassette - Space Cab - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8140 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 1195 liters, 2nd Diesel tank, Height of fifth wheel coupling: 113 cm, Fifth wheel coupling: Fixed, Suspension type: Air suspension, Type of cab: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 355 kW (476 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 12 mm; Tire tread depth right: 12 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 13 mm; Tire tread depth right outer: 14 mm; Suspension: Air suspension Weights Unladen weight: 8,140 kg Payload: 11,360 kg GVW: 19,500 kg Maintenance APK (Technical Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €788 per month (default, 60 months); Inquire for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Kljdpfx Asy R Rtisl Nou Inquire directly about our European warranty package.

Condition: good (used), mileage: 425,992 km, power: 355 kW (482.67 HP), first registration: 11/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,550 mm, total width: 2,550 mm, total height: 4,020 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - LED lamp - Manual - Radio/cassette - Space Cab - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8060 kg, Gross vehicle weight: 19500 kg, Total tank capacity: 995 liters, 2nd diesel tank, Height of fifth wheel coupling: 111 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: Space Cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Type of lighting: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 355 kW (476 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Transmission Kljdpfsy R Rpkex Al Nou Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 8 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inside: 11 mm; Tire tread depth left outside: 11 mm; Tire tread depth right inside: 9 mm; Tire tread depth right outside: 9 mm; Suspension: Air suspension Weights Unladen weight: 8,060 kg Payload: 11,440 kg GVW: 19,500 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €788 per month (default, 60 months); Please inquire for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm Klodoy Ez A Ropfx Al Nsu plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : Kedpfoxaapvox Al Njlu - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: used, mileage: 494,000 km, power: 316 kW (429.64 HP), first registration: 11/2003, fuel type: diesel, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2003, LICENSE PLATE: BX701RD Kjdpfx Aljzdlulj Nolu TITLE: IVECO 260E43 EUROTECH SKIP LOADER FRONT LEAF SPRINGS & REAR AIR SUSPENSION 8X2 TRIDEM WITH FOLDING Z-TYPE CRANE REF: 25C44 YEAR: 11/2003 HORSEPOWER: 430 ENGINE DISPLACEMENT: 10,308 cc EURO EMISSION: 3 KILOMETRES: 494,000 TRANSMISSION: manual DIFFERENTIAL LOCK: yes RETARDER/INTARDER: yes AXLES: 4, configuration 8x2 WHEELBASE: 5,100 mm TRAILER COUPLING: yes (without bell-mouth) ORIGIN: Italy CABIN: short and low profile SEATS: 2 PAYLOAD: 16,700 kg - GROSS VEHICLE WEIGHT: 32,000 kg fully loaded - GVW + TRAILER: 44,000 kg fully loaded BODY TYPE: demountable (hooklift) SKIP LOADER MODEL: CARGHI KT 20/65 TELESCOPIC EXTENSION: yes (double) SLEWING: no ROLLER: vertical ADR: yes (dangerous goods approved) BODY MOUNTING CAPACITY MIN: 4.70 m + 0.20 m MAX: 7.20 m + 0.20 m TOTAL LENGTH: 9.80 m TOTAL LENGTH WITH CONTAINER: 10.180 m EQUIPMENT: - in-cab pneumatic controls for the demountable system - dual hydraulic oil cooler radiators - front and rear stabiliser pads - auxiliary service hydraulic lines - hydraulic lines for trailer - trailer electric socket with electrohydraulic control unit - additional air bellows on 1st axle, individually controlled - Marchesi M10000L crane, 01.72 mtr. 0080 year 2003, 1 extension, length 7.10 m, maximum tip load 1,440 kg, folding Z-type - crane with joystick and dual pump REFURBISHED: no INSPECTED: yes TYRES: 80% 1st axle, 100% new 2nd, 3rd and 4th axles PRICE: €32,500 + VAT Subject to errors and/or omissions Displayed prices are exclusive of VAT. Please contact our sales department for a current price and terms comparison. For more information: Loris: +39 348 4773001 URL: #theskiploaderspecialists SCARRABILI AURORA deals in the purchase and sale of industrial and commercial vehicles, specialising primarily in the waste sector. Specialists in trucks, trailers, and demountable (hooklift) equipment. With an immediately available stock of over 50 trucks and more than 150 containers, hooklift bins and containers with and without cranes. E.&O.E. Given the volume of adverts and detailed information published, Aurora asks you to confirm the accuracy of the data with our sales team.

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST Klodpsxacdvsfx Al Nou diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, total length: 825 mm, total width: 520 mm, total height: 1,010 mm, tank capacity: 45 l, empty load weight: 145 kg, power: 2.2 kW (2.99 HP), New machine 24 months warranty Advantages: Kljdpfjivdy Isx Al Nju + Tested by our master baker and pastry chef with various doughs + Very robust construction, power transmission with belt drive + No high voltage required - operation with 230V possible! + With 4 feet and a permanently installed bowl + Mobile machine, on swivel wheels with parking brake + Short kneading times with excellent results + With reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with switch-over and shut-off function + Ideally suited for smaller batches + Bowl, center rod and spiral made of stainless steel + Safety grille with shut-off function + Fast spare parts supply within 1-2 working days Technical data: - Flour capacity: 2 - 16 kg - Dough capacity: 3 - 24 kg - Bowl volume: approx. 45 liters - Motor power: 2.2 kW (kneading spiral & bowl drive) - RPM at 50Hz (level 1 - 10) spiral: 65 - 320 - RPM at 50Hz (level 1 - 10) bowl: 6.5 - 32 - Connection values: 230V - 1 phase - 50Hz - Dimensions in mm: 520 x 825 x 1010 (W x D x H) - Height when flour dust cover is open: 1310 mm - Height upper edge of bowl: 658 mm - Net weight: 145 kg

Condition: excellent (used), Quick Snap brush segment, brush, plastic brush, nylon brush -Manufacturer: Tennant, brush, 20" nylon with plate, unused, original packaging -Type: 14967 Disco 20" D=500 Kljdpfsgtu Ubsx Al Neu -Number: 2x brushes available -Price: per piece -Dimensions: Ø 500 x 110 mm -Weight: 6 kg/piece

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information Kjdpfx Alexrz Hmj Njlu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2000, condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Ksdpfjmdn Imsx Al Njlu Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2008, condition: good (used), fuel type: diesel, JOHN DEERE 1515 Lawn Mower Yanmar Diesel 4x4 Park Mower / Air Conditioning 2008 Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers and attachments. Ksdpfx Asy A I T Dol Nslu All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Kledpfx Aefwmydel Nju Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 2 mm, table height: 825 mm, back gauge travel distance R-axis: 630 mm, input voltage: 380 V, overall weight: 1,360 kg, total length: 2,700 mm, total width: 1,500 mm, total height: 1,200 mm, warranty duration: 12 months, cutting length (max.): 2,050 mm, working length: 2,050 mm, Equipment: documentation/manual, finger protection, Mechanical sheet metal guillotine METFORMER MCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, MCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Klsdpfsvlxh Eox Al Nou Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight 4,0 t weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor Kljdpfeyxr Hgox Al Neu - oil dust collector

Condition: excellent (used), Year of construction: 1998, operating hours: 34,434 h, - Iemca MINI BOSS 325 CNC/32 loader - CONVEYORS IND. ASS. chip conveyor, Model: TMPF 1088 - Kraft&Bauer fire extinguishing system (year 2021) The machine has always operated using only neat oil, never with emulsified water. Operating hours: 34,434 Klodpfxey Uffzs Al Nju

Condition: good (used), Year of construction: 2020, Denios Spill Containment Tray Duo IBC Station ECO 2 Manufacturer: Denios Type: IBC Station ECO 2 Year of manufacture: 2020 Material: PE-LLD Load capacity: 4,000 kg with evenly distributed load Klsdpfxjyx Sdlo Al Nou Sump capacity: 1,000 l Gross sump capacity: 1,100 l Approval: Z-40.22-303 Version: for 2 IBCs without platform Serial number: 100583705-004

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 3 with front plate 1 without front plate ----- Shipping within Germany €12.00 Shipping within EU €25.00 Kledpfx Aley Apn Ao Nou Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min Kledpfx Ajy Rah Aol Nju grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device

Condition: used, TORNOS MULTIDECO 20/6b is a CNC Multi-spindle turning lathe engineered for high-precision machining with excellent accuracy and reliability. Key capacities: 17 axes total, 6 cross slides, 5 plain turning slides, longitudinal carriage way 160 mm, 6 spindles + 1 back spindle, round bar capacity Ø 5–20 mm, max workpiece length 100 mm, production rate 45 pcs/min. Technical specs: stepless spindle speeds up to 5000 rpm, spindle power 15 kW, total installed power 43 kVA, supply 3x 400 V 50 Hz, machine weight ≈8500 kg, dimensions L3500×W1600×H1950 mm. Equipment: ROBOBAR bar feeder type MSF 522/6, coolant system, chip conveyor, pick-up spindle, spindle stop device, lamp and status light. Delivers tight tolerances; suitable for automotive, watchmaking, toolmaking, aerospace and medical industries. Kedpfxoyxny Aj Al Njlu

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Number: 2x milling head available Kledpfeu Ricusx Al Nsu -Price: per piece -Dimensions: Ø 260 x 60 mm -Weight: 14.1 kg/piece

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8200-C Klodpfx Asu Ridrjl Nou -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Klsdpfx Alju Ricns Neu -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13/23-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 262 x 60 mm -Weight: 14.1 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Kedpfx Alou Riczj Nelu -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13/23-8250-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 262 x 60 mm -Weight: 14.2 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R220.13/23-8200-C -Mount: Ø 60 mm / Bolt circle Ø 100 x 18 mm Dimensions: Ø 210 x 60 mm -Weight: 8.2 kg Kjdpju Ribqefx Al Nolu