Used Den-Jet Cd50 for sale (3,642)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights Ljdpfx Ajxc Syrja Ijhg * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2025, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Lhodpfox Uq Diox Aa Ieg Total length: approx. 4645 mm Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. *Please observe national legal requirements regarding weight and speed restrictions.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, The automatic drilling machine Jet Smart is the ideal solution for craftsmen and small and medium enterprises. Flexibility, speed and ease of use are the main features of the machine which ensures high productivity and a perfect drilling in any working condition. Fast and precise drilling! Boring from the top: a choice without compromises! Perfectly aligned joints aligned and no error thanks to automatic reading of piece dimension, that allows to correct any difference between real panel length and the one set. ///Technical details Max. piece dimension - 3050x900x60 mm Min. piece dimension - 200x70x10 mm Max. speed axis X-Y - 40-40 m/min Boring head: vertical / horizontal spindle, blade X - 12 / 6, 125 mm Lhedpfx Ajy Rl Arja Ijg Electrospindle (S6) - 5,5 kW (7,5 HP) - 18.000

Condition: reconditioned (used), functionality: fully functional, Powerful three-phase motors and easy adjustment of angles and milling depths make the WSK8-3 the optimal machine for your custom production. Lhjdpfox U Ampex Aa Ijg • Automatic start when the control levers are operated • Upper milling unit continuously swivels up to 45° • Simple setting of units using scales and stops • Easy adjustment to various profile systems

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, B2 sheet-fed inkjet press including: • Max sheet size: 750 mm x 585 mm • Speed: 3600 B2 sheets/hour • 4 colour • Inline primer Lhjdpfx Aaoyidg Ne Isg • With full service contract • XMF DFE workflow • 720.000 prints only (sheets) • Packaging option for 600 micron board

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Lsdjwz Ekqspfx Aa Ijhg Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, Hochdruck pump unit Hammelmann HDP 402 in WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 Ljdpoipadxsfx Aa Ijhg PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min. PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min. Drive speed: 2100 rpm Plunger: dia. 50 mm Drive power: 400 kW With 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine With workshop and changing room included. Dimensions (LxW): approx. 7600x2450 mm Weight: approx. 9000 kg Year of construction: 2003 Operating hours: 7951 Condition: High-pressure pump has received new valves. New batteries. In good used condition.

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Lodpfx Aaoxvc Igs Iehg

Year of construction: 2022, condition: ready for operation (used), An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible. Lhsdpfjvfft Usx Aa Ieg

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Lsdpfxew Nykme Aa Iehg

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Lodpfx Aju N Hdyea Iehg

Year of construction: 2014, condition: ready for operation (used), A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible. Ledpfx Aaox Ih D Hj Ishg

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Lhedpsxmkcmofx Aa Iog

Condition: ready for operation (used), Year of construction: 2018, Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Lhodpfexguc Djx Aa Isg

Condition: good (used), Year of construction: 2014, machine/vehicle number: M-102132-1, The technology is intended for the processing of poultry meat by spraying without the use of injection. The fillets are loaded onto the transport system, which transports them step by step to the injection part of the device. From there, it is transported to a conveyor that transports the fillets to the crate equipment. The varnish is prepared in a specialized facility with a volume of 400 liters. The waste paint is collected in a storage tank with a volume of 800 l. The storage system itself has the ability to heat or cool the liquid (as needed). Lhjdsk Sygnjpfx Aa Ijg

Condition: used, mileage: 58,943 km, power: 85 kW (115.57 HP), first registration: 04/1995, overall weight: 3,000 kg, fuel type: gasoline, color: green, axle configuration: 4x4, empty load weight: 2,849 kg, tire size: 205r16, wheelbase: 2,850 mm, gearing type: automatic, emission class: euro1, suspension: other, machine/vehicle number: 694, Equipment: all wheel drive, differential lock, truck registration, TUV and AU are newly made truck registration , The Puch is in a really good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The Puch is equipped with: ZAUGG snow blade electro-hydraulic drive, snow plow can be adjusted by the driver while driving, there is a counterweight in the rear for good traction, all-wheel drive and off-road reduction, rear differential lock, 2 seat paws, high off-road capability for extreme winter use. Tire size 205R16, Mercedes automatic transmission with 4 gears, total weight 3000 kg, engine capacity 2296cm? , 24Volt power supply, There are several vehicles in stock Lhodpfxoqx Sz Io Aa Ijg All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp

Condition: used, Year of construction: 2003, Manufacturer: Falch Hochdruck-Strahlsysteme GmbH Vehicle type: Tandem trailer Lhedpfx Aaew Sdxyo Ijg Type No.: H692.03 Year: 2003 Permitted gross weight: 2600 kg Axle load: 1–1300 kg / 2–1300 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 10001, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 4,000 kg, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 1,600 mm Y-axis: 1,200 mm Z-axis: 700 mm Control: Heidenhain TNC 426/430 Spindle Spindle: HSK 80 Maximum speed: 18,000 rpm Direct length measuring system: Yes Lhedpfxswtq Ryo Aa Isg Machine table (workpiece carrier) Clamping surface: 1,800 x 1,300 mm Number of T-slots x width: 5 x 18 mm Groove pitch: 250/375 mm Workpiece weight: max. 4,000 kg

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger) Ledjytp U Aepfx Aa Ishg

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 1x Orbimaster 2500 0.80-9/16-18UNF LH Ledpfxsx Svnbo Aa Ishg 1x rotary union TD3000-SCS-9/16 1x plug-in foot switch, 2-channel, 24VDC 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm various nozzles

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component - Optional cutting with pure water or abrasive General technical data Drives: Servo AC Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 El Lodpfof Ak Ugjx Aa Ishg

Condition: used, mileage: 1,001 km, color: brown, driver cabin: other, gearing type: other, loading space volume: 8 m³, loading space length: 4,400 mm, loading space width: 2,300 mm, loading space height: 800 mm, Vehicle location: Bovenden, steel body, flap, jet drop sides Lhjdpevhg Edjfx Aa Ijg Body: Meiller body NEW approx. 8 cbm, roof protection ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, loading space volume: 13 m³, loading space length: 4,600 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, Vehicle location: Bovenden, steel superstructure Body: for 3-axle truck, approx. 13m³, flap. Roof protection ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfx Aasvhgy Uj Iohg - .

Condition: used, mileage: 1,001 km, first registration: 01/1995, color: orange, driver cabin: other, gearing type: other, loading space volume: 12 m³, loading space length: 5,350 mm, loading space width: 2,300 mm, loading space height: 1,020 mm, Year of construction: 1995, Vehicle location: Bovenden, steel superstructure, jet drop sides, flap Body: Meiller body approx. 12.5cbm. Dismantling from vehicle DB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfx Aaevhgy Is Iehg - .

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Lhedsp S Srhepfx Aa Ieg