Used Edmund Bühler Microplate Shaker for sale (298)

Condition: used, Year of construction: 2020, FLIEGL SDS350 15 Meter X-TRA LONG STRAIGHT Container Chassis for 2 Swap Bodies or 2 Containers !EXTRA LONG! !! 14.85 m long!! • Mountings for 2 x 7.45 m swap bodies • or 2 x 20-foot containers • Straight chassis • 3 x SAF air-suspended 8-ton axles • Lift/lower system • ABS • ASR Vehicle dimensions and weights: • Gross weight: 35,000 kg • Unladen weight: 4,100 kg • Dimensions: 14,850 x 2,550 x 1,200 mm • Tyres: 385/55 R22.5 • Tread depth: 13/13/11/12/12/9 mm Dcsdpfjwtbvtjx Akqsk - Very good condition, hardly used! - Technical Inspection (TÜV / HU / SP): NEW! - SP: 01/26 - German semi-trailer! - 1st owner Errors and prior sale reserved! = More information = Year of manufacture: 2020 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, mileage: 1,333,000 km, first registration: 10/2012, fuel type: diesel, Year of construction: 2012, Mercedes-Benz Citaro O 530 C1 EEV 41 Seats + 44 Standing Places Dodpsx Nc Ehofx Akqsck *Slight accident damage to the front left, but fully operational!! (The bus was driven 500 km to us under its own power without any issues)* *Well-maintained despite mileage!* Drive: ● Automatic ● ZF transmission ● 220 kW / 299 hp ● Intarder ● EURO 5 EEV ● ABS ● ASR / deactivatable Equipment: ● 41 comfort seats (including driver) ● 44 standing places ● Interior cameras ● Battery master switch ● Radio ● Double doors at the front ● Double doors at the rear ● Interior lighting ● Lifting and lowering device ● Bus stop brake ● Auxiliary heater ● Auxiliary ventilation ● Air conditioning ● Driver’s air conditioning - 1st owner - German bus, maintained at authorized workshop! - TÜV / General Inspection / Safety Inspection: New on request and at extra cost (windscreen replacement)! Errors and prior sale excepted! = Further Information = Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: used, mileage: 637,428 km, first registration: 10/2015, Year of construction: 2015, DAF XF 106 440 BL 4x2 *SpaceCab* Flatbed Truck with Sliding Curtain and EDSCHA Roof Chassis: • Emission standard: EURO 6 • Engine: 320 kW / 435 hp • Displacement: 10,837 cm³ • Cab: SpaceCab (SC) • Automatic transmission • Reinforced engine brake • Hill start assist • Differential lock • Adaptive cruise control (ACC) • Emergency brake assist • Collision warning system • Lane departure warning system Dsdpfox Nc E Isx Akqsck • Automatic climate control • Auxiliary/parking heater • ASR – disconnectable • Leaf suspension front • Air suspension rear • Disc brakes • Multifunction steering wheel • Airbag • Refrigerator • Central locking • Electric windows and mirrors • Bluetooth hands-free system • CD-radio • Telephone • 1 bed / bunk • Roof spoiler • Trailer coupling (jaw-type) • Duomatic + air coupling heads • 1 x 700 litre aluminium tank • GVW: 18,000 kg (technical max. 20,500 kg) • Wheelbase: 4,900 mm Tyres: • 315/70 R22.5 on steel rims • Tread depth: 10/10 6/5/7/5 mm Body: MEUSBURGER flatbed body • Year of construction: 2015 • Sliding curtain • EDSCHA roof system • Side lashing rings • Rear portal doors • Internal bed dimensions: 6,100 x 2,490 x 2,750 mm (LxWxH) - TÜV/general inspection/roadworthiness: NEW! - German vehicle! - 1st owner! Errors and prior sale excepted! = Further Information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: used, mileage: 544,354 km, first registration: 12/2016, fuel type: diesel, fuel: diesel, Year of construction: 2016, Mercedes Actros 4163 LS 8x4 GIGA-Space Heavy Haulage Tractor – 160 Ton Towing Capacity FULLY EQUIPPED! 18 months ago: Genuine Mercedes replacement engine, replacement transmission, new intarder/retarder, and new clutch!!! ● 6-cylinder Euro 6 engine with 460 kW / 630 hp ● Displacement: 15,569 cm³ ● Axle configuration: 8x4 ● Wheelbase: 3,900 mm ● Leaf (1st and 2nd axle) / air suspension (3rd and 4th axle) ● 250 t gross combination weight ● Intarder / retarder ● Reinforced automatic transmission with turbo retarder clutch ● ASR / switchable ● Differential lock ● Hill start assist ● Automatic climate control ● Stationary air conditioning ● Auxiliary heater ● Adaptive cruise control ● Lane departure assist ● Emergency braking assist ● GIGASPACE comfort cab with 2 bunks and seating area ● Air horns ● Light bar with 4 work lights ● 2 fuel tanks ● Cab spoiler ● Sliding fifth wheel ● Multifunction steering wheel ● Large navigation system ● CB radio ● Tyres: 385/65 R 22.5 (1st + 2nd axle) ● 315/80 R 22.5 (3rd + 4th axle) - One owner! - German vehicle! - New roadworthiness inspection (HU/TÜV/SP)! Errors and prior sale excepted! Dodpfeyutkdox Akqjck = Further Information = Contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: used, mileage: 696,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag Dcodpewnz Dtofx Akqjk • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, mileage: 330,363 km, first registration: 11/2007, Year of construction: 2007, MAN TGL 8.180 BL Flatbed Truck with Tautliner Curtain Side ● 6-cylinder engine ● Output: 132 kW / 180 HP ● Emission standard: Euro 4 ● Displacement: 4,580 cm³ ● 6-speed manual transmission ● 2-stage engine brake ● Cruise control ● ABS / ASR Dcsdpox Nc Hxefx Akqsk ● Automatic climate control ● Roof spoiler ● Electrically adjustable exterior mirrors ● Electric windows ● Ramp mirror ● 3-seater / double co-driver bench ● Sun visor ● Radio Bluetooth/MP3 ● Headlight range adjustment ● Disc brakes ● Suspension front/rear: leaf/air ● Tires front/rear: 215/75 R17.5 ● Tire tread depth: 7/7 13/13/13/13 mm Gross vehicle weight: 7,490 kg Unladen weight: 5,200 kg Payload: 2,260 kg ● Wheelbase: 4,200 mm ● Trailer hitch: Ringfeder towing coupling ● Vehicle length: 8,050 mm ● Vehicle width: 2,550 mm BODY: Saxas Flatbed/Curtain Side MPS 61-M ● EDSCHA sliding roof ● Wooden floor ● Sliding curtain / Tautliner ● Curtain frame with wooden slats ● Rear portal doors ● Side lashing rings ● Internal dimensions: 6,100 x 2,460 x 2,630 mm (LxWxH) - Main inspection/emissions test / safety inspection: new on request and at extra cost! - German vehicle! = Further information = GVW: 7,490 kg Contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, mileage: 474,484 km, first registration: 10/2010, Year of construction: 2010, RENAULT PREMIUM 380 DXI BDF Flatbed with Palfinger Crane PK 12001 and Steerable Lift Axle Djdpfxox Nc Uis Akqeck ● Power: 286 kW / 390 hp ● Displacement: 10,837 cm³ ● Emissions standard: EURO 5 ● Axle configuration: 6x2 ● 3rd axle can be lifted, steerable ● Differential lock ● Engine brake ● Retarder ● Air conditioning ● Electric windows ● Electrically adjustable, heated exterior mirrors ● Radio / CD ● Central locking ● Gross Vehicle Weight (GVW): 26,000 kg ● Unladen weight: 11,170 kg ● Wheelbase: 5,300 mm ● Trailer hitch preparation ● Suspension front/rear: Air/Air ● Front axle tyres: 315/80 R22.5 ● Rear axle 1 tyres: 315/80 R22.5 ● Rear axle 2 tyres: 315/80 R22.5 ● Tyre tread depth: 13/14 / 11/11 / 10/10 / 10/13 / 5/4 mm Body: Gergen - Jung ● Type: JWLA ● BDF platform body with subframe ● Body dimensions: 7,100 x 2,550 mm Crane: Palfinger ● Type: PK 12001 EH S106-EK-A ● 4 boom extensions (3 hydraulic + 1 mechanical) ● Slewing drive ● Load hook ● Remote control ● Year of manufacture: 2010 ● 2 hydraulic outriggers sideways ● Emergency stop switch - German vehicle! - 1st owner - TÜV / Safety Inspection / UVV: NEW! Errors and prior sale excepted! = Further information = GVW: 26,000 kg Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, first registration: 11/2007, Year of construction: 2007, GERGEN JUNG 2 - axle trailer for skip containers / containers, twin tires, air suspension • ABS • 2 x air-suspended 9-ton Mercedes axles • Disc brakes • Twin tires • Lift/lowering system • Axle load: 2 x 9,000 kg • Gross vehicle weight: 18,000 kg • Curb weight: 3,400 kg • Payload: 14,600 kg • Tyres: 265 / 70 R 19.5 • Tyre tread: 80 % • Total trailer length: 7,500 mm - Ready for operation! - General inspection / TÜV safety inspection: new! Errors and prior sale reserved! Dsdpfx Aksyutx Ujqjck = Further information = GVW: 1 kg Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: used, first registration: 10/2011, Year of construction: 2011, REISCH 82 m³ Moving Floor Semi-Trailer Walkingfloor with Grain Hopper FLOOR: IN VERY GOOD CONDITION! ● Body: Full aluminum ● Chassis: Steel ● Capacity: 82 m³ ● 3 x BPW ECO Plus axles ● Air suspension ● Lift axle ● Raise/lower system ● Disc brakes Djdsyutyrjpfx Akqsck ● Platform ● Rear grain hopper and slide ● Rolling tarpaulin ● Aluminum sliding wall ● Hydraulic locking ● WABCO Smartboard ● ABS ● ALCOA rims ● Tyres: 385/65 R 22.5 ● GVW: 35,000 kg ● Curb weight: 7,700 kg! ● Overall length: 14,050 mm ● Internal dimensions (incl. grain hopper): 12,600 x 2,470 x 2,510 mm - German trailer! - 1st owner! - TÜV / roadworthiness test: new! Errors and prior sale excepted! = More information = Payload: 1 kg For more information, contact Joannis Arpantzanis or Kai Bühler.

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag drilling systems) – OPTIMAT BHC 200 – High-precision CNC machining center with woodWOP 8! Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • - Dust-proof linear guide system • - Rack and pinion drive in the X-axis and ball screw in the Y- and Z-axis • Travel ranges of the axes: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Work table: • X = 5250 mm (length) • Y = 1250 mm (width) Dedswx Iidjpfx Akqeck • Z = 100 mm (thickness) Optimat BHC200 • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Processing of wood, plastic and light metals possible • Condition: good; very well maintained, regularly serviced / last service 03/25 • Modernization measures of the machine: 10/2022 - New machine computer / Siemens industrial PC - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining for a wide range of materials • Ideal for carpentry shops, furniture manufacturers and custom-made products • Reliable performance, even for demanding projects Scope of delivery: • Machine + Industrial PC • Operating manual • CE SAFETY AND PROTECTION EQUIPMENT - Protective grille in the side and rear area - Three-part safety mat in the front area allows the placement of workpieces in the non-active working area. Inspection and test run on-site possible and welcome! Dismantling and transport must be arranged by the buyer.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Dcodpfx Aoxpximekqsk Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria Dedpfju T Hrvjx Akqock - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: new, with compressed air cleaning and frequency inverter Dsdpfxewzyh Re Akqsck Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Dcedpfju T Hrpsx Akqjk Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required Dcodpfx Akou T Hrcoqek -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Installation information: - Required length: 2300 mm Dsdpju T Hq Ssfx Akqsck - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Motorised thickness table adjustment with two speeds - Digital display for working height - Thickness table made of grey cast iron - Thickness table mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional with two rollers in the thickness table - Standard with noise protection and chip guard curtain at infeed and outfeed - Adjustable roller pressure - Front feed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor This item comes with a 3-year Stürmer warranty upon online registration. Warranty only applicable for end customers in Germany and Austria. Manufacturer Dcodpfx Asu T Hq Eekqek SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter (thickness): 150 mm Installation information: - Required space length: 1305 mm - Required space width/depth: 1080 mm - Required space height: 1197 mm - Note on required space: The dimensions take into account maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Note on working area: Please add the given dimensions to the required space to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Max. stock removal thickness: 8 mm Electrical data: - Main motor power: 9 kW - Supply voltage: 400 V - Network frequency: 50 Hz Planer cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 4500 rpm - Planing width max.: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dcodpfsu T Hhksx Akqjk Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Spigots: 5 pieces, Dodpfx Aju R Tb Ujkqeck nozzle diameter: 2x160,2x100,1x120 mm

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Dsdpfx Aownr Ehekqjck Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 300 mm, Dsdsu R S Uyjpfx Akqjck Nozzle: 5 pieces, nozzle diameter: 160 mm

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Dcodpju R S I Hefx Akqek Cutting height: 60 mm, Voltage: 230 V

Condition: used, Gun cleaning device MARX PWA 900 -used- Dcsdeu R Tfaepfx Akqek Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Dsdpswziflefx Akqock Power supply: 230 Volt

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Dcjdpevtm Ayofx Akqsk pneumatic hold-down device, pressing device, stop rulers