Planer-thicknesser CASADEI PFS 520 TERSA Holzkraft CASADEI

CASADEI Abricht-Dickenhobel PFS 520 TERSA Holzkraft

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Rcjdpfx Absxtgz Eoueh Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Rcedjxnlavspfx Abujh

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Rcjdpody Hm Dsfx Abueh Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm 4-knife cutterhead Traditional knives Length of work tables: 2630mm Adjustable fence, tiltable at 45° Rsdpeiwa Spjfx Abusch Motor power: 4kW Smoothing combs CE certified

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Rcsdozuzcmspfx Abush Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Working width 530 mm Length of the planing table 3.000 mm Number of knives 4-TERSA St. Motor output 4 kW FIMAL surface planer type PF 530 N ----- NEW MACHINE "Partnership Edition" Technical specifications: ----- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Rsdoxmk A Hjpfx Abusch Max. Chip removal dressing according to CE: 8 mm Motor 50 Hz., 4 kW / 5,5 PS Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop ----- Special offer from stock: ----- All prices plus VAT / plus Freight and assembly according to expenditure (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Rodpfx Asy Ti Ecsbusch Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Condition: excellent (used), Coater SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4 knife shaft with traditional knives Planer shaft speed 5000r.p.m Rodpfx Asuqnbuobujch Main motor 4kw Suction nozzle fi120 Dimensions of the machine 800 x 1000 x 1080mmH Weight 410kg

Condition: new, Year of construction: 2023, New machine Rjdpsw I U Hmofx Abusch Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife planing cutterhead system TERSA, d=120mm: 4,800 rpm Max. chip removal during jointing according to CE: 8 mm Min./max. thickness setting: 3/310 mm Min. workpiece length: 250 mm Feed speed: continuously variable, 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Sound pressure level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal threaded spindles Electromotoric thickness table lift with electronic positioning device (input of the planing height via keyboard with electronic display) Electrical system according to CE with magnetic brake Protective switch Emergency stop switch Safety switch for cutterhead cover Thickness table extension 600 mm Dust extraction port d=150mm Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Redpfx Absih Dxdjuech Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -