Used Exhaust Flue for sale (1,833)

Condition: new, functionality: fully functional, machine/vehicle number: HR14477, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,750 mm, power: 37 kW (50.31 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 4,922 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,330 mm, Off-road forklift Chassis number: HR14477 Load centre of gravity: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: New device Nljdpfx Ahsykgb Ujzeb Technical condition: New Front tires size: CONTINENTAL RT20 165A5 31570 R15 22PR 8015 Front tires condition: New Rear tires size: CONTINENTAL RT20 136A5 700 R12 16PR 500S1 Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours 3rd valve, 4th valve, front work light, full cabin, CE certificate, interior mirror, joystick, rotating beacon, windshield wiper, LED, seat, Mast tilt valve Load suspension 3rd + 4th function Hydraulic kit Fixed connection for the 3rd + 4th hydraulic circuit Speed increase for hydraulic functions with cross lever Air-sprung fabric seat GRAMMER MSG95 Street lighting halogen front + rear Fender extension front metal 1300mm Reversing warning signal Lockable diesel tank cap Raised vertical exhaust on counterweight Cyclone filter

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, total length: 900 mm, total width: 800 mm, total height: 1,900 mm, laser hours: 2 h, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, laser source manufacturer: Raycus, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 Nedpjqfcvisfx Ahzolb The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2000, operating hours: 14,471 h, 2000 | Caterpillar 963b | Used Tracked Loader | 14471 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 25900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 72 inspection points 68 approved ✅ 3 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the crawler loader. Presence of oxidation on the cabin. Strong emission of white smoke from the exhaust and blowby pass. Presence of oil on the Carter, under engine compartment. And emission of white smoke under engine compartment. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37120 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Nledpfjyaikqjx Ahzjb 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. Nljdpfx Ahjy T Hbzezeb - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 111B030728009, type of input current: AC, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Strapping machine with strap frame (aluminum) for packages up to 600 x 600 mm (up to 48 straps/min.; depending on tension and frame size) Nodpey Tnzpjfx Ahzslb Features: ⦁ Exhaust system ⦁ Strap ejector ⦁ Fully automatic strap feed ⦁ Strap end detection with remaining strap ejection ⦁ Strap cutting blade ⦁ Electric spool brake ⦁ Foot switch on the operator side, also for continuous strapping ⦁ Machine height adjustment (table height 755–895 mm) ⦁ Mobile machine (2 locking casters) ⦁ Power cord (length 3 m) ⦁ Package weight max. 30 kg ⦁ PC control with operator panel ⦁ Internal spool ⦁ Stepless adjustment of tension ⦁ Smooth, bolted table tops ⦁ Ambient temperature from +10°C to +40°C ⦁ Strapping width 5–9 mm (thickness approx. 0.40–0.45 mm) 12-month warranty (in accordance with the enclosed warranty terms) Complete documentation Spare parts supply Technical service

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: ET1PA24025070612, This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, year of construction 2024. For the following index series: Index H and I, also usable for DUO units or single units. This hood not only binds escaping steam, but also eliminates odors and smoke. You do not need an exhaust duct to the outside. An LED lamp automatically indicates when you need to change the filter. This version features stainless steel baffle filters, as well as a pre-filter mat located behind them. This protects the activated carbon filter (newly installed) in the hood, which serves as the core, from contamination too quickly and offers optimal functionality. This Plus condensation hood is optimal for front areas, enclosed spaces, or show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be done without great effort afterward. The hood has been tested in our in-house workshop and is fully functional with a 6-month warranty. The stated price is net plus 19% VAT. Service: We are happy to arrange a certified Rational customer service provider nationwide in Germany. Are you looking for a specific Rational device type? Ask us, we have access to an extensive range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or self-collection • Competent advice – before and after the purchase • Provision of operating instructions, wiring diagrams & spare parts • Inspection according to DGUV V3 Nledpfx Aowngb Rehzob Technical data: • W x D x H: approx. 854 x 1226 x 628 mm • Minimum door opening dimensions for transport W x H: 845 x 850 mm • Serial number: ET1PA24025070612 • Year of construction: 2024 • Power connection: V: 200 - 240 / Hz: 50-60 • Weight: approx. 95 kg Condition: Used, tested, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have questions, want advice, or would you like to take a look on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our general terms and conditions (GTC).

Condition: used, This listing is for the Dasit Biopharma Faster SafeFAST Classic 209D Microbiological safety cabinet The unit is in full working condition and is ready for immediate use Overview & Compliance Suitable for EN 12469:2000 (EU) and NSF/ANSI 49 (US) standard compliance, the SafeFAST Classic 209 D provides triple protection (user, product, environment) via Class II vertical laminar airflow containment  Airflow: ~70% is recirculated through an H14 HEPA/ULPA filter, ~30% is exhausted via a second H14 HEPA filter  Key Features Construction: Exterior in epoxy‑powder‑coated steel; rear wall meets EN12469 cleanability criteria; segmented work tray of AISI 304L stainless steel, removable for cleaning/autoclaving  Electrical safety sash: Motorised vertical sliding front sash, with standard working aperture of 200 mm (max 490 mm), also hinged for deep cleaning  Airflow & Filtration System: Single or dual centrifugal fans; static negative pressure design ensures all contaminated air is drawn into HEPA filters; avoids positive pressure in any chamber  Control & Safety Systems Nsdpsxhftcsfx Ahzolb Microprocessor-based control (ECS™ or similar): Real-time monitoring via rear-lit LCD and touch keyboard, displaying airflow status, filter condition, fan status, and sash position; allows safe operation and data logging  Audio‑visual alarms: Alert the user in case of deviations in airflow velocity, sash mis-position, clogged filter, fan issues, or power loss 

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet with Stand The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet also known as a biosafety cabinet designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Nlsdpjxhfkbsfx Ahzob Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, Year of construction: 1999, operating hours: 14,103 h, 1999 | Komatsu WA470-3H | Used Wheel Loader | 14103 hours Nljdjy Udg Ropfx Ahzeb 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 33 approved ✅ 14 imperfect ℹ️ 10 issues ⚠️ 📌 Inspector's Comment: Poor but operating Wheel loader, very low on gearbox oil A lot off rust , Exhaust silencer broken, several leaks and cabin electrics not working , play on articulation pin and steering cylinders, rear axle sweats oil, good running engine , right front brake needs to be checked , stall test doesn't make machine moves 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40838 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t Nlodpfx Aheu Rwauszsb - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: used, Year of construction: 2009, machine/vehicle number: A0911001, Dust removal brush with spiral brush, positioned perpendicular to the workpiece travel direction, suitable for installation on an existing conveyor. - Manufacturer: Venjakob - Year of manufacture: 2009 - Height-adjustable via a handwheel - Workpiece heights from approx. 0–200 mm depending on the type of mounting bracket - Working width: 1,300 mm - Total width: 2,270 mm of the brushing unit - Exhaust system required on site - Exhaust connections: 2 x 120 mm - Airflow: approx. 2,000 m³/h - Electrical power: 1.5 kW - Volts/Hz: 400/50 - Machine without control cabinet and frequency converter (Available as an option) - Without roller conveyor, only the brushing machine (Available as an option) Description of the brushes: Horsehair, 2x 4-row, spiral-shaped from the center outward. 2 spirals, each with a pitch of 520 mm opposite each other. - Brush length 1,340 mm - Brush diameter 250 mm Nsdpfouulpqjx Ahzslb - In stock in Blomberg

Condition: used, mileage: 411,000 km, first registration: 05/2019, overall weight: 18,000 kg, axle configuration: 2 axles, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, parking heater, Air conditioning, Classic Space cab, tinted windows, multifunction steering wheel, cruise control, underrun protection not present, front axle with air suspension, raised exhaust system (behind cab), main fuel tank left - additional tank left, air-suspended driver’s seat, radio, reversing camera, manual air conditioning, exterior sun visor, electric windows for driver and passenger, rear axle air suspension, axle configuration: 4x2 - front axle load 8.0 t, trailer socket 24V / 15-pin, Antos - exhaust to the right outside, electrically adjustable and heated exterior mirrors, electronic brake system (EPB) with ABS + ASR, rear axle differential lock, steel air reservoir, medium compressed air unit, driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, driver assistance system: Stability Control Assist, cab: mounting height 600 mm - cab width 2.30 m, cab: hydraulic tilting device, cab: steel-sprung, standard, cab: reinforced (Sweden), cab floor with 170 mm engine tunnel, cab variant: ClassicSpace, suspension: air/air (full air suspension), electric windows, tinted windscreen, alternator 100 A, speed control system (cruise control), 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 L, manual roof hatch (steel), rear axle crown wheel 440, integral rear, comfort locking system, three-piece mudguard, fuel tank: 390 L aluminum, unregulated power steering pump, engine brake, engine compartment encapsulation, ramp mirror, spare wheel, residual heat utilization, fifth wheel coupling: manually lubricated, fifth wheel coupling: standard, Mercedes-Benz PowerShift transmission, disc brakes front and rear axles, passenger functional seat, front splash guard, external left storage compartment, 24V socket in cab, tachograph / EC control unit, aerodynamically shaped underbody paneling, front underrun protection, toll recording preparation, cranked front axle, controlled water pump, central locking with remote control, permissible total weight 18.00 t, emission standard EURO 6, driver’s side airbag, audio system: CD radio (Bluetooth), battery 220 Ah, compressed air connection in the cab, driver assistance system: distance control, driver assistance system: Attention Assist (fatigue detection sensor), cab: M ClassicSpace, info display 12.7 cm with video function, air conditioning, fuel tank: low profile, fuel tank: narrow profile, air intake behind cab, two-stage air compressor, engine 10.7 L - 290 kW inline 6 diesel (OM 470), fog lights with LED, daytime running lights and cornering lights, wheelbase 3700 mm, acoustic reversing alarm (external warning signal), fifth wheel coupling: mounting height 150 mm, lower sleeper berth, circuit breaker, seat cover/upholstery: driver’s seat velour, seats in cab: passenger seat with armrest, seats in cab: comfort swing driver's seat, seats in cab: fold-down backrest on driver’s seat, exterior sun visor, steel rims 9.00x22.5 (rear axle), additional 24V socket in passenger footwell, reinforced steel front bumper corners, pre-installation for reversing camera, seat belt warning system, auxiliary heater (water, ABS, differential lock, auxiliary heater, cruise control, spoiler package, disc brake, on-board computer). Nledeyf Szpjpfx Ahzjb

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 3,800 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% Description: - FEM carrier incl. forks and load hook - € 2.650,00 - Earth bucket 2200 mm 1 m3- - € 1.998,00 - Adapter Euro mount - € 1.339,00 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, air conditioning, CE certificate, exterior mirrors, joystick, rotating beacon, windshield wipers, LED, Nedpfxow Eqc Tj Ahzelb Specifications: -load capacity 3800kg -lift height 10,0m -MAX gradeability 40% -unladen weight 7330kg -engine KUBOTA 79,5kw ( 107 HP ) -capacity 3769 cm³ -exhaust standard Tier4f -steering all-wheel steering / crab steering / front wheel steering -rear hydraulics - 40 km/h -air conditioning -air suspension seat -carrier plate with hydraulically operated quick coupler -steering indicator light

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Nledowgc I Rspfx Ahzjb • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade Nledpfx Ahjif Ek Rjzeb • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a Nedpfey Ty E Hsx Ahzjlb low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying ----- ----- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal curves, chains Tensioning stations, pneumatically/electrically controlled stop stations 50 crossbeams, 5,000 mm long (max. weight 250 kg) Automatic tilting of the crossbeams in the drip-off area after the flooding system 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer stocks Infinitely variable drives. 1 lifting/lowering station for loading and unloading workpieces (max. stroke 2,000 mm) 1 set of steel structure for mounting the conveyor system ----- Item 2: Flood Coating System 1 flowcomat II-P 1 system for colourless primer Maximum workpiece width approx.: 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flood lances, each fitted with a maximum of 3 nozzles. 1 set of accessories for cleaning the system 1 stainless steel sieve fitted externally 1 paint supply 1 control unit ----- Item 3 Additions to the dip coating system 1 Drip channel and drip tray in the evaporation area behind the dip coating system After dip coating, the crossbars run into a drip buffer. The dripping coating material is returned to the dip coating system via the non-stick PP drip tray (and drip channel). Rinse water is collected in the flood coating system and pumped out. The use of PP for the areas in contact with the coating ensures easy cleaning of dried-on coatings. 1 Humidification system 1 Control unit for the humidification unit Complete with controller for the humidification volume 1 Hygrostat for measuring room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation system 1 R+H waco 200 coagulation system – 200 l collection tank ----- Item 4: Topcoat spray booths 2 paint booths for topcoating 2 extraction walls with sandwich panel cladding to suit the work area. Fan: 16,000 m³/h Filter area: - 3 sets of Ecola pre-separators - 1 set of Paintstop filters - 1 set of bag filters Recirculating air distribution ceiling in a tensioned frame design Volume 12,000 m³/h approx. 75% recirculation – 25% exhaust air operation (the exhaust air volume is extracted from the hall) installed on site-provided foundations in accordance with the layout 2 Prolac overspray recovery columns ----- ----- Item 5 Addition to the topcoat spray booths 3 humidification nozzles fo...

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Nledsv Iplaopfx Ahzsb Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm Nlsdpsu Nwwdofx Ahzob total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified Nljdou Rnd Dopfx Ahzjb On sale as is. *

Condition: used, Year of construction: 2002, Technical details: pressure capacity: 10 bar tank: 350 l motor: 2 x 2,2 kW volume capacity: 2 x 275 L/min weight: 555 kg total power requirement: 2,2 kW dimensions L x W x H: Kompressor: 2,7 x 1,0 x 1,55 m pressure vessel: Größe: L:2,4 x Ø 450 m compressor is free of oil and with noise reducer insulation consists of : 2 compressor - each 3 cylinder Besteht aus: Air pressure tank: - Make Mehrer - Permissible operating pressure 11 bar - YOM 1995 Exhaust air over 1 1/2 "reduced to 1", hose connection Ø 14 x 27 mm with shut-off valve Operation via control panel Permissible operating temperature 50 ° C i.D. Nedju Nz Slopfx Ahzolb *

Condition: used, Year of construction: 2007, Technical details: flow rate: 1100 m³/h filter: 1 Stück filter surface area: 350 x 400 mm filter: mechanisch weight of the machine approx.: 100 kg Njdevvk Ifspfx Ahzolb dimensions L x W x H: ca. 0,5 x 0,6 x 1,4 m Oil mist separator - Dry separator with fan -Intake connection Ø 195 x 70mm -Exhaust air opening WxH: 440 x 150mm -380 V fan External operation *

Condition: used, Technical details: suction stud diamter: 150x80 mm connection electric: 380-420 V total power requirement: 0,35 kw Dimensions (LxWxH): 950x500x680 mm Dust Suction Device with Fan Fan: size diameter 500x300mm, exhaust openning dia.=160mm Filter: Nsdpfx Ahsu Nwvtozelb 2 pieces size 300x120x500mm, space of filter size W:300xW:260xH:520mm intake (suction) diameter 150x80mm *

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t Nedpfx Aheu Nvbuezjlb STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h Nlodpfx Asyt I Axjhzeb filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg Njdpfxevdczae Ahzjlb dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *