Used Sei E1 for sale (3,684)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Rsdemhh Dzjpfx Al Ijt - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Rjdpfx Aomhhx Ijl Iet Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Rsdpfxjmhhyas Al Iot Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Rsdpfx Ajmhh Anol Ijt - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Rodpfx Asd Tqalsl Iet - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Redpfjmhhf Sjx Al Ist Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Rjdpfx Aomhhl Hsl Ist Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) Rodpfx Alomidyfe Iot - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Rodpfx Aomhh Dtol Iot When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 462, turning length: 500 mm, turning diameter over cross slide: 250 mm, turning diameter: 250 mm, spindle motor power: 7,500 W, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 56 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, rotational speed (max.): 3,500 rpm, bar diameter (max.): 56 mm, overall weight: 2,800 kg, turning diameter over bed slide: 310 mm, Equipment: documentation/manual, For sale: MORI SEIKI horizontal lathe - Model: FRONTIER L1 Rsdpfx Aoy Ibx Rjl Ijt - Machine No.: 462 - Controller: FANUC – MSC 521 - Year: 7/1996 The machine has been regularly serviced and maintained, precise, and in excellent condition. It was used for toolmaking jobs in small batches of up to 50 pieces, flawless and accurate. It is connected to the power supply and ready for immediate operation.

Condition: used, Używana klaryfikująca prasa filtracyjna produkcji Seitz Orion typ OF 100/150 w wykonaniu ze stali kwasoodpornej. Prasa posiada 154 płyty filtracyjne wykonane ze stali kwasoodpornej o wymiarach 1000 mm x 1000 mm, oraz dwie płyty końcowe. Powierzchnia filtracji ok 310 m2. Zamknięcie hydrauliczne. Prasa zamontowana na ramie ze stali KO. W zestawie z maszyną przyłącza podawania, manometry i lokalny panel sterowania. Rjdpfx Alsyi Eygj Ist Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: good (used), Technical specifications for the side panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x mesh side panel, used Material color: light silver lacquered for frame depth: 600 mm Rjdpfx Alsylt Udj Ist for frame height: 2,490 mm Item: SWG 3625 Dimensions: 2,485 x 450 mm Mesh size: approx. 50 x 50 mm Note: Mounting brackets are not included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General product information: This item is offered only for collection. Should transport or shipping of this item be required, additional costs will apply. Please contact us to inquire about delivery costs, which vary depending on delivery location or scope of order.

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm Rjdpfx Aleuq Iwpj Iot BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 713/714, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller model: FANUC /SEIKOS 18Mi, spindle motor power: 8 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, HITACHI SEIKI Vertical Machining Center VS50, 3 axes X Y Z + 4th axis with 360,000 positions. Tool magazine: 20 SK40. Control: Fanuc / Seikos 18Mi. Rsdsyzyc Ijpfx Al Ist

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Rsdpfx Aoycu Ruel Ist Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis Rodpfx Aewi Ibuol Iot *

Condition: excellent (used), Year of construction: 1998, CNC Control: MSD-501II X-axis travel mm: 235 Z-axis travel mm: 495 Swing over bed mm: 680 Max. turning diameter mm: 390 Max. turning length mm: 485 Bar capacity mm: 86 Spindle speed rpm: 3,500 Spindle power kW: Spindle nose: A2-8 Chuck: Driven turret / Live tooling Turret stations: 10 Redpfx Ajy An Nxol Iot Tailstock: Yes EQUIPMENT Driven turret Tailstock Self-centering chuck FANUC electrical cabinet Coolant system Manuals / electrical diagram

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Redpfjxqt Tisx Al Ijt

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length Rodpfxoyfv Tve Al Iot • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. Rodpfxox D R Rro Al Iet • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 370 mm, spindle motor power: 11,000 W, overall weight: 2,800 kg, controller model: MSX -805II, number of axes: 2, This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max turning length: 363 mm Rodpfx Alox U Dlaj Iet • Max turning diameter: 440 mm • Through spindle hole diameter: 73 mm • 8-inch chuck size Extra Information Machine still under power Dimensions Machine Depth 1975 mm

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,150 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 660 mm, controller manufacturer: FANUC, controller model: 0i-MF, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3s Akira Seiki V 4.5 XP was manufactured in 2018. It features a Fanuc 0i-MF control type and offers a spindle speed of 12,000 rpm. With an X-axis travel of 1,150 mm, Y-axis travel of 640 mm, and Z-axis travel of 660 mm, this vertical machining center is in excellent condition. Consider the opportunity to buy this Akira Seiki V 4.5 XP vertical machining center. Contact us for further details. • Distance table–spindle nose: 100–760 mm • Rapid feed (X/Y/Z): 30 / 30 / 25 m/min Rodpoyh Nwwefx Al Iet • Table size: 1,300 x 600 mm • Tool changer: ATC, 28 positions Additional equipment • Chip evacuator Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 12,000 rpm, overall weight: 13,000 kg, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 18,500 W, tool weight: 8,000 g, number of axes: 5, This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details. • B-axis rotation: +160° / -180° • C-axis table: 360,000 positions (0.001° resolution) • Rapid traverse (X/Y/Z): 50 / 50 / 50 m/min • Maximum torque: 135 Nm • Turning function: Integrated in table • Max. turning diameter: 450 mm • Max. swing diameter: 700 mm • Tool magazine capacity: 60 tools • Max. tool diameter: 125 mm • Max. tool length: 300 mm • Spindle cooling: Oil cooling system • Zero point: Automatic adjustment and dynamic correction (8 points) • Cutting control: Automatic power control • Program memory: 2 MB • Custom macro: 999 variables • Tool life management: 128 × 2 groups • Status: Currently operational; inspection by Mori Seiki technician available Additional equipment • Pallet system: Automatic robot for loading/unloading • Measurement: Renishaw tool and part probing systems • Cooling: Independent high-pressure coolant system (40 bar) • Chip management: Rear chip conveyor • Power: Electrical transformer • Documentation: Full manuals, parts list, and electrical schematics • Tooling and pallets included; estimated value €50,000–€55,000 Technical Specification Taper Size BT 40 Rodpfx Aloym Dbqs Iot

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm Rjdsyg Icljpfx Al Iet • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 3,000 rpm, travel distance Y-axis: 60 mm, spindle motor power: 5,500 W, number of axes: 5, This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features a MSX-850 control unit, a 300mm chuck, and a 10-station turret. Capable of a max spindle speed of 3,000 rpm and a rotary tool speed of 6,000 rpm, it's ideal for complex turning tasks. Additional features include a Y-axis movement of +/-60mm and a fully programmable NC tailstock. Contact us for further details regarding this machine. • Control unit: MSX-850 (MAPPS II software) • Chuck: 300 mm with 90 mm bore, A2-8 headstock • Increased main motor power/torque: 25/30 kW, 1,000/1,300 Nm • Turret: 10 stations • Driven tools (C-axis, Y-axis) • Maximum rotary tool speed: 6,000 rpm • Rotary tool drive motor: 5,5/5,5/3,7 kW • Y-axis travel: ±60 mm • Turning capacity: • Turning diameter: 420–500 mm • Turning length: 1,250 mm • Tailstock: NC, fully programmable with separate motor • Increased Z-axis power • In-machine manual tool presetter • Chip tank • Cooling system: 325/520 W • Standard tool holders • Leveling blocks • Built-in work area lighting • Automatic power-off system • Including standard accessories Rsdpfox Sz Dbsx Al Ijt Additional equipment • New chip conveyor LNS (MY: 2025)