Used Weger Ventilation Station for sale (6,368)

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg Lodpfx Aod Tg Dcsb Nsah

Condition: good (used), The 7025 Rodent Ventilator is a positive pressure pump (according to Starling's Ventilator method), designed for use with guinea pigs, rats, mice and small birds. The 7025 drive consists of a variable speed geared motor linked by a novel variable stroke mechanism to easily interchangeable cylinder/piston assemblies. Their precisely regulated geared-motor speed is controlled by an electronic feedback-controlled drive, thus providing the most accurate and reliable stroke rate control of any respirator available. Electronic noise broadcasting is negligible, and the pumps are also quiet to the ear. The unique linkage mechanism insures that: the piston almost touches the cylinder end with each stroke, regardless of the pre-set volume, thus insuring all air taken into the pump is expelled with each stroke. The volume, clearly indicated on a stationary dial, is adjustable by means of a knob while the pumpis either running or at standstill. The reciprocating motion is generated, adjusted and transmitted to the piston by rods and articulatedjoints only. The lack of sliding friction leads to: practically no wear and no backlash, hence silent operation and exact stroke reproducibility. The 7025 can be equipped with 5, 10 or 30ml cylinder/piston assembly. Ledpfsh N D Ilox Ab Nsah The operation of the ventilator may be "paused" by an external TTL logic signal (optional feature). Synchronised START/STOP feature available as optional (series 7125). The picture features a Rodent Ventilator 7025, together with the 6025 for Cat/Rabbit Good working condition. Please check out our other listings as well.

Year of construction: 1999, condition: used, Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction Ledpfx Abel U E T Te Njah -Fan: centrifugal fan Ø 715 mm -Volume output: m³/h -Motor: Dietz 6.8 kW -Speed: 1450 rpm -Protection class: IP 54 -Input: Ø 470 mm -Dimensions: 815/750/H815 mm -Weight: 159 kg

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Ljdolhqdmopfx Ab Nsah Available immediately

Condition: used, Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg Lasdpfx Aolmrkzeb Njh

Condition: used, Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 Lsdpfeiqy Tpjx Ab Nsah -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

Condition: used, Multi-person workstation, see photo's for more details. Ledpfx Aou Nm Rasb Njah More photos and full specifications: /

Condition: new, Year of construction: 2024, functionality: fully functional, power: 1,800 kW (2,447.32 HP), Available directly from stock: Laodeuubctspfx Ab Njh 1700kW load bank for fixed installation. 400volt/50hz 6 steps of +/- 250kW 2 steps of +/- 125kW Other steps possible in consultation External control power supply 64Amp/400v/50hz Control via Modbus and HMI in the cabinet Equipped with its own circuit breaker in the casing. Can be extended with a motor. 20Ft container

Condition: used, fuel type: diesel, color: blue, Year of construction: 2010, Year of manufacture: 2010 Usable material: concrete Lajdpjuu A S Nofx Ab Noh CE marking: yes Damage: none Price: On request

Condition: used, fuel type: diesel, color: blue, Year of construction: 2022, Year of manufacture: 2022 Suitable material: concrete CE marking: yes Laodpfxsuu A Tms Ab Noh Damages: none Price: on request Reference number: 9

Year of construction: 2003, condition: used, Mobile cooking station with a ceramic cooktop/griddle and a bain-marie. Lsdpfeh Euuzjx Ab Noah

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. Lasdpfsq Ngb Dsx Ab Noh 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. Ledpfx Aboq Nyuvj Noah 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. Lodpjhmfctsfx Ab Nsah We deliver and install throughout the EU.

Condition: good (used), Year of construction: 1964, Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder -Manufacturer: Wilhelm Simon, 2-station tool grinding machine -Motor power: 1 kW -Speed: 2800 rpm -Grinding discs: Ø max. 150 mm Laodpfx Abehmlhvo Neh -Coolant system: Pump missing, can be replaced for an additional charge -Dimensions: 1430/780/H1380 mm -Weight: 456 kg

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Ljdpjga Nh Hofx Ab Neah Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, Fully mobile ready-mix concrete plant Frumecar Fastmix *THE READY-MIX CONCRETE PLANT* - Year of manufacture: New - 2-4 chambers with a capacity of 7-14 m³ - Capacity: 14-25 m³/h depending on the mixer size - Mixer size: 0.5 m³ - 0.75 m³ - 1.0 m³ - Concrete software from Siemens with self-service terminal, new barcode system, and EC card terminal - Concrete discharge conveyor 9m long - Cement silo 32 tons, including cement screw conveyor - Assembly, commissioning, and training included - 2-year warranty - The highest quality plant on the market. All components are produced in Europe. Siemens electric motors and gearboxes are installed. Other plant components are from the market leader, VAM. Lodpjhd I Smefx Ab Nsah Typographical errors and errors in this offer are expressly reserved. Only the specific agreements in the order confirmation or the purchase contract are binding. More construction machinery and mixing plants on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 947526697, Frumecar ECA 500 fully mobile concrete batching plant Production capacity: 30 m³/h * 4 aggregate hoppers * Vertical-axis mixer TRH-750 with a capacity of 750 liters * The plant does not require any foundation and can be assembled in 1 day Lasdpfx Abehd I Sqs Neh * 1-year guarantee from startup * Request a specific offer and technical details More machines and mixing plants are available on our website. Further information: Intended use: Construction, Applicable material: Concrete, General

Condition: new, Year of construction: 2025, machine/vehicle number: 463857676, FRUMECAR EBA 1250 MOBILE CONCRETE MIXING PLANT * 60 m³/h * Year of manufacture: 2021 Condition: New - 4 dosing units - Capacity of dosing units: 25-40 m³ - Capacity: 60 m³/h - Mixer: Twin-shaft compulsory mixer FTS - Mixer size: 1.25 m³ - Frumecar K2 fully automated computer control system - Electrical control: Siemens S7 - Diameter of cement screw: 219 mm - Weighing of aggregates: via conveyor belt - Number of cement silos: 1-3 - Installation included - 2-year warranty from the start of production - Winter enclosure possible Laedpfx Abohd I Tgj Neh Typographical errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or purchase agreement are binding. More construction machinery and mixing plants on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: good, Technical condition: good, Optical condition: good.

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Lasdpfx Abohd Na Us Nsh Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Mixer size: 3 m³ Cement silos: 2 x 55 tons Guarantee: 1 year from startup More machines and mixing plants on our website Further information: Intended use: Construction industry Usable material: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Year of construction: 1983, condition: good (used), Ventilator Piller RC VII Laedpfxeghrx Nj Ab Noh Motor 11kW DIETZ 5220 1/min

Condition: good (used), Year of construction: 1982, Grinding machine, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder -Manufacturer: Gebr. Bayer, tool grinding machine with 2 stations -Motor power: 0.75 kW -Speed: 2800 rpm -Grinding discs: Ø max. 225/160 mm -Coolant device: Lsdponymgdsfx Ab Neah -Dimensions: 1210/710/H1340 mm -Weight: 195 kg

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Laedjpr Ut Nspfx Ab Noh Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Condition: good (used), Material station Motan 6x6 diameter 60 mm year: price: 2.850 € Lodpfx Abjqnvifj Neah contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2010, FERAG station for loading printed products into the chain including 5690616 motor and 31232590 encoder year 2010 Lasdpov Sdhksfx Ab Nsh