Used Bihler Grm 100 for sale (23,732)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! Lhodpfxey Hkd Hs Aifji The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Ljdpfxszizmuo Aifehi Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Lodpszizmnjfx Aifehi - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Lodpjzizmbefx Aifohi Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Lhedpfxjzizl Rs Aifei Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) Lhsdpfx Aozizg Ueifji (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Ljdezizghjpfx Aifohi - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 Lhjdpfxezizdyj Aifei T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg Lhsdovlz Arspfx Aifoi - immediately available -

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Ljdpfx Aeyuty Sjifohi Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Lhodey N R N Uepfx Aifsi Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 240 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Technical condition: good Front tyres type: solid rubber (bandages) Front tyres size: 16-5-11 1-4 Front tyres condition: 80 - 100% Rear tyres type: solid rubber (bandages) Rear tyres size: 16-5-11 1-4 Rear tyres condition: 80 - 100% Lhsdpfxjylqp Eo Aifei Battery voltage: 24V Battery capacity: 250Ah Battery year of manufacture: 2015 Battery condition: 60 - 80%

Condition: excellent (used), mileage: 1 km, power: 74 kW (100.61 HP), fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, number of gears: 6, number of seats: 5, Year of construction: 2026, Number of doors: 5 Cab: double Emission class: Euro 0 Technical condition: very good Lsdpfxszlh D Ej Aifshi Optical condition: very good Damage: none Warranty: None Value-added tax/differential taxation: Value-added tax deductible

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France Lhsdsy Dhrpspfx Aifsi 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 249000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Lsdpfswycmmex Aifohi Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: Ledpfx Aozm Hr Reifohi 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: excellent (used), Year of construction: 2000, Vollmer RC 100 straightening center Lhsdpfevw Nb Tex Aifoi

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Lsdpfx Aijtrl Skjfshi

Condition: ready for operation (used), Year of construction: 1998, operating hours: 78,026 h, pressing force: 102 t, overall weight: 6,750 kg, number of axes: 6, This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details. • Distance between frames: 2700 mm • Maximum stroke: 200 mm • Number of axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Voltage: 400/415 V • Frequency: 50 Hz • Nominal current: 199 A • Number of phases: 3 • Installed power: 9 kW • Noise level: Ljdpfx Aijzl Dvqofohi

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz Lsdpjzimb Defx Aifehi - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, Instrument Systems Lhedpfszimaajx Aifei Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Lhedpfx Aszii Uteifji Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Ljdpfjznn Upex Aifjhi Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Ledpfx Aeziizajifehi Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, Year of construction: 2012, 2012 | Nissan Cabstar France Elevateur Topy 100-1 | Used Truck-Mounted Boom Lift | 80618 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 49 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Lhjdezl E Dcjpfx Aifoi The truck drives well, shifts well, good condition, auxiliary frame galvanized no rust. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41123 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.