Used Cms Cnc for sale (18,905)

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Nlsdpey R Tk Rsfx Agyec Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Nsdpfx Agsig T Amjyjlc Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Nlodpfjw D Uqfex Agysc Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Nljdox N Iclspfx Agysc Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Njdsx Rut Tjpfx Agyolc In-Feed Cross Transfers. Out-Feed Cross Transfers.

Year of construction: 2007, condition: excellent (used), 603 LBH Nlodpfxjl Si Uus Agyoc Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) Nsdpfjq Hgg Uox Agyelc ■ Year of construction 2007

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit Nlodpfjy E N Hdox Agyjc

Condition: good (used), Year of construction: 2000, Well-maintained, used CNC lathe from Okuma. Type: LT10-M Capacity: ø 210 x 130 mm Spindle bore: ø 53 mm Okuma OSP-U100L control system Further specifications can be found in the data sheet. Njdezhal Hjpfx Agyslc

Condition: good (used), Year of construction: 2000, Used CNC lathe by Emco Padovani Type Emcomat E 300 x 3000 Nodszhaixopfx Agyolc Fagor CNC control system Turning diameter over the bed: Ø 550 mm Turning diameter over the cross slide: Ø 340 mm Distance between centers: 3000 mm Double chuck, front: Rota with quick-change jaws Spindle nose: Camlock 8 Maximum spindle speed: 2500 RPM Tool holder: 4-way Parat Gr. 3 Includes 2 steady rests, various tool holders, and chuck jaws.

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Njdpfx Agozdgnboyslc Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: used, Rico Syncro PRCN 30-135M CNC Pressbrake Cyblec DNC 60 Control Year 2006 Foot Pedal Laser Guards Top & Bottom Tooling 130ton Capacity x 3100mm Nlsdpfxjzdghns Agyoc 9200kg Footprint 3900mm x 2000mm x 2600mm

Condition: excellent (used), Year of construction: 2005, operating hours: 1,963 h, functionality: fully functional, machine/vehicle number: 69724, type of input current: three-phase, Please message us with any questions we are aware there is limited information provided. Nedpfsxvp E Eex Agyelc

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Nodpszdtkhjfx Agyolc Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2015, operating hours: 1,488 h, Hurcon TM6 CNC Lathe Year of construction 2015 Winmax Control Nledpfxezd Hvqj Agyec Swarf Conveyor Only 1488 Hrs spindle time Immaculate machine ready to go 12 station turret 45mm bar capacity Weight 3500kg Thankyou for taking time to look at this excellent machine that will enhance any CNC workshop

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Nlsdpfx Aezd Dfiogysc Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Nlodjzdthmopfx Agyjc Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Nlodpfx Ajwvhvfogyec Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 Nljdpfx Agezf Hyrjysc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2005, condition: used, A used Gericke CSM 722 - no internal sieve with this machine - is in working condition and mounted on stainless steel frame Njdpfezc Rbpex Agyelc Ready to Ship Worldwide.

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Njdjzaz Uzopfx Agyolc Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 2013, machine/vehicle number: 0-250-21-1606, Machining center with collet clamping for the workpiece, 2 workpiece collets with integrated stop system, workpiece length: max. 2,500 mm, workpiece width: max. 1,000 mm, workpiece thickness: max. 80 mm (2x40 mm), workpiece support area including air cushion support table, workpiece removal area with transverse belt conveyor and lifting arms, one machining support each at the top and bottom equipped with the V42, H8X, N2 X-Y 90 configuration, F2-6 kW with 42 vertical drilling spindles + 10 horizontal drilling spindles (8 in the X direction and 2 in the Y direction) + nut saw swiveling 90° in the X-Y direction + milling unit with tool holder for shank diameter: 25 mm, 2 dowel insertion stations for the automatic insertion of dowels on the 2 workpiece longitudinal edges, Powercontrol PC85 control system, including tool trolley with various shank milling cutters and saw blades. Nedpfx Agszha Dpeyolc

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis Nledpfxsyyxzms Agysc MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Nledpjzhafyefx Agyec Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. Nlodpfx Agszg Uwzsyec grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm