Used Center lathes 300-399mm turning diameter over bed for sale (227)

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck Ledsxn Sf Sopfx Ag Noah 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Laodoxp Hudjpfx Ag Noh

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Ljdpsxn Iv Tsfx Ag Neah Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: good (used), Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. turning diameter over slide (mm) 205 RPM / speed 38 - 1600 (16x) Accessories: Laodov U Uvwjpfx Ag Njh Digital readout, 2 axes 3rd spindle chuck 250 mm, 4th spindle chuck 200 mm, documentation, and Multifix tool holder

Condition: used, L + Z Lathe COLCHESTER / HARRISON Type Student 1800 Machine no. No. 4/0023/08817 Year of construction approx. 1985 Center distance 635 mm Turning diameter over bed 330 mm Turning diameter over face slide 210 mm Center height over bed 165 mm Center height over face slide 105 mm Spindle bore 42 mm Longitudinal and cross feed Chuck holder Short taper DIN 55029 D1-4 Camlock Ø 63 mm Inner tailstock taper MK 3 Pinol adjustment 110 mm Spindle speed 22 - 1800 rpm 16 steps Drive power 2.2 kW Mains connection 380 Volt, 50 Hz. - 3-jaw lathe chuck BERNARDO Ø 160 mm with turning and drilling jaws - Simple steel holder - Coolant device in the machine base frame Ljdpfouz If Asx Ag Noah - Splash guard on the rear of the machine Space requirement L x W x H 1700 x 900 x 1250 mm Weight 750 kg

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm Ledpjxmaktsfx Ag Noah turning speed range 24 - 2800 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - Lsdpfx Aowrndzog Nsah - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: Laodpfx Agexqbd Nj Nsh L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Laodpfx Agsxldids Noh Chuck Guard Lighting Coolant System Rear Splashguard

Condition: good (used), Centre height: 175 mm Distance between centres: 800 mm Swing diameter over bed: 350 mm Swing diameter over cross-slide: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm Lasdpfoxc Ewwsx Ag Nsh With digital readout

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm Lajdpfx Aexn Txaeg Noh turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Laedpfx Aow T U Sgsg Noh Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) Laedewrngcjpfx Ag Noh * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: ready for operation (used), Year of construction: 1997, L & Z Lathe Colchester Model Triumph 2500 Year of manufacture: 1997 A-axis digital readout Swing over bed: 400 mm Distance between centres: 700 mm Centre height: 195 mm Swing over cross slide: 246 mm Spindle bore: 54 mm Swing diameter in gap: 585 mm Infinitely variable spindle speeds: 14 – 2500 rpm Ljdjxqbd Aepfx Ag Njah Drive: 7.5 kW Tailstock taper: No. 5 Tailstock quill stroke: 145 mm Chuck Multifix toolholder with insert Digital readout Weight: 2.5 t Price: EUR 3,750.-- plus VAT, ex works

Condition: excellent (used), Year of construction: 2003, Pinacho S-90/165 Straight Bed Lathe Model: S-90/165 Year: 2003 Swing over Bed: 355mm Distance Between: 750mm Spindle Speeds: 30 – 2000 RPM Spindle Bore: 42mm Machine with: 3 – jaw chuck Ledpfew Nq A Tex Ag Neah Quick Change Toolpost with holders Coolant Pump and Fittings

Condition: excellent (used), functionality: fully functional, Make: Colchester Type / Model: Student Tip width: 500 mm aperture: 42 mm Laedpfx Agsu T Iwyj Neh Center height: 175 mm Turning diameter over bed: 350 mm over slide: 200 mm Speed range: 34 to 1,500 mm Longitudinal feed: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: steel holder, 3-jaw chuck, 4-jaw chuck, steel holder Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Condition: good (used), Year of construction: 2015, turning length: 400 mm, 2015 Schinfa Rebuild EUR 18.500 Re-Grinded guideways Laodpfexgdb Nox Ag Njh New bearings / screws / engines New eletric / lubrication / protectors CE-Safety cobvers HeidenHain ND780 2 axis Dro  Steady rest / Documentation / Drawings Slant bed construction Levers and handles controlled from one place Precision H7 Turning jobs Collet device with collets  Multi fix tool holder system    DBC Turning Length: 400mm Swing over bed Ø: 315mm Swing over cross slide Ø:180mm Spindle bore: 37mm Spindle power: 3.2kW Stroke pinole: 100mm Spindle taper: 5Mk Speeds / ranges: 90-3550Rpm Quill Ø: 48mm Length: 1400mm Width: 700mm Height: 2100mm Weight: 1250kg

Year of construction: 1967, condition: used, LatheFabr. Weipert Type W500 turning diameter 500 mm Laodpfjh Rwklex Ag Noh Turning length 1000

Condition: used, functionality: fully functional, Conventional Lathe WEILER CONDOR VS2 Technical details Spindle bore: 38 mm Laedpfx Aexmg S Rsg Neh Swing diameter over bed: 340 mm Swing diameter over cross slide: 200 mm Turning length: 750 mm Spindle speed (max.): 2,800 rpm Spindle speed (min.): 12 rpm Overall length: 1,700 mm Overall width: 650 mm Overall height: 1,500 mm Total weight: 800 kg

Condition: used, Year of construction: 2007, Parallel Lathe PROMAC type 948 Year of construction: 2007 Between points: 800 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 180 mm Maxi diameter in brocken bed: Ø 400 mm on 100 mm Spindle diameter: Ø 36 mm Spindle speed: from 90 to 1800 RPM Rapid Turret GOODSHAPE 3-jaws chuck LADNER Ø 160 mm Lajdpfxexpug Ue Ag Neh Motor: 1,5 kW Threadings: Metric + Whitworth Steadies: One 3-points steady + one follow steady Tailstock: CM3 Supplied with one plate Ø 250 mm + one independant 4-jaws chuck Ø 200 mm+ + some jaws Lubricant pump Voltage: 380 V Length: 1700 mm Depth: 700 mm Total height: 1600 mm Weight: approx 800 KG PROMAC type 948 Year of construction: 2007 Between points: 800 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 180 mm Maxi diameter in brocken bed: Ø 400 mm on 100 mm Spindle diameter: Ø 36 mm Spindle speed: from 90 to 1800 RPM Rapid Turret GOODSHAPE 3-jaws chuck LADNER Ø 160 mm Motor: 1,5 kW Threadings: Metric + Whitworth Steadies: One 3-points steady + one follow steady Tailstock: CM3 Supplied with one plate Ø 250 mm + one independant 4-jaws chuck Ø 200 mm+ + some jaws Lubricant pump Voltage: 380 V Length: 1700 mm Depth: 700 mm Total height: 1600 mm Weight: approx 800 KG

Condition: ready for operation (used), Weiler Commodor lathe with leadscrew and feed shaft for sale. Manufacturer: Weiler Type: Commodor Condition: used, good, still in production Scope of delivery: - Multifix B tool holder - Three-jaw chuck Lajdpfx Aoxladweg Njh

Condition: good (used), Year of construction: 2021, – Year of manufacture: 2021 – Centre distance: 910 mm – Swing over bed: 300 mm – Swing over gap: 430 mm – Swing over cross slide: 178 mm – Spindle bore: 38 mm – 60/2000 rpm – Longitudinal and cross feed – Digital readout – Multifix with 4 tool holders – Safety guard – Three-jaw chuck Laodpfx Asxhx S Eeg Nsh – Emergency stop switch – Documentation – 400V

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Lodsxmf Nnopfx Ag Neah Swing diameter over cross slide: 190 mm Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: used, Parallel Lathe SOCOMO type STAR 305 Between points: 700 mm Maxi Ø on bench: Ø 320 mm Lodpfx Agsxpugus Njah Maxi Ø over saddle: Ø 175 mm Spindle diameter: Ø 36 mm Rotation: from 70 to 2000 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Length: 1800 mm Depth: 800 mm Total height: 1200 mm Weight: approx 1 T

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Lodpfx Agoxpuf Rj Njah Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T