Used Simplex for sale (60)

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump Podpfx Alowwq Exocora -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment Predpfxjzkx Hns Alcea Braking System * Complies with ECE-R13 Electrical System * Complies with ECE-R48 * The Kögel superstructure guidelines must be observed! They can be accessed at [website address]. Frame / Chassis Frame * Made of high-quality steel, but without an outer frame * Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 * With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) * b) 2 x 20' ISO containers (frame extended) * c) 1 x 30' ISO container flush with the rear (frame extended) * d) 1 x 20' ISO container flush with the rear (frame retracted) * e) 1 x 20' ISO container in the middle (frame retracted) * 4 pairs of heavy-duty lashing rings * Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable * Length adjustable via 1 pneumatic cylinder, low-maintenance guidance on special plastic sliders and 2 extension rollers * Automatic pneumatic locking of the extension Suspension * Axle lift mechanism on the axle * Control of the axle lift fully automatic, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Operation on the chassis via a switch * Also possible from the driver's cab (switch in the cab is necessary - PIN 12) * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 * Air suspension with approx. 180 mm suspension travel Tires * 6 x 385/55 R 22.5, 160J (manufacturer of our choice) * 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis Components * Kingpin supports (manufacturer at Kögel's choice) mechanically with leveling foot, 24 t lifting capacity * Single-sided operation on the right side of the direction of travel * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of * 3 pairs of semi-circular fenders with mud flaps * 2 support wedges with holder * Lateral protection device, according to ECE-R73 * Closed underrun protection made of square steel tube according to ECE-R58 with an * protected lighting carrier arranged above it. Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638, (without connection cables) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit * 2 tamper-proof coupling heads at the front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) * Rear impact guard Steel rear impact guard, solid, on the rear end crossmember Electrical / Electronic System * Lighting carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium Package, consisting of * LED license plate lighting * LED side marker lights and reflectors at the front * Flashing LED side marker lights * Superseal and bayonet connectors for the lights * 2 LED outline lights with arms, mounted on multi-chamber tail light * 2 LED multi-chamber tail lights (without LCG) * Front connector 15-pole ISO 12098 (without connection cables) * Complies with vehicle class FL * AT Information Systems Kögel Telematics System Basic * Trailer incl. location monitoring,

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list: Complete equipment available upon request. Braking system * Complies with ECE-R13 * Electrical system complies with ECE-R48 * The Kögel superstructure guidelines must be observed! They can be accessed at [website address] Chassis * Chassis frame made of high-quality steel * However, without outer frame * Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337 * With cross member and container locking mechanisms for accommodating * a) 1 x 40' High-Cube container (frame extended) * b) 2 x 20' ISO containers (frame extended) * c) 1 x 30' ISO container flush at the rear (frame extended) * d) 1 x 20' ISO container flush at the rear (frame retracted) * e) 1 x 20' ISO container in the middle (frame retracted) * 4 pairs of heavy-duty lashing rings * Rear frame extension, extendable by approx. 1,370 mm * Load capacity 5,800 kg, with spiral cable * Length adjustable via 1 pneumatic cylinder * Low-maintenance guidance on special plastic sliders and 2 extension rollers * Automatic pneumatic locking of the extension Suspension * Axle lift mechanism on axle 1 * Axle lift control fully automatic, load-dependent * Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h * Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm, ET 120 Psdpozkx Ifofx Alcsra * Air suspension with approx. 180 mm travel Vehicle tires * 6x 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75 * Offset 120 mm (ET 120) Chassis components * Landing gears, mechanically operated with level foot, 24 t lifting capacity * Single-sided operation on the right-hand side when driving * Splash protection system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires * consisting of: 3 pairs of semi-circular mudguards with mud flaps * 2 chocks with holder * Lateral protection device, according to ECE-R73 * closed underrun protection made of square steel tube according to ECE-R58 with an * illuminated marker board arranged above and protected * Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connection ISO 7638, (without connection cables) * Parking brake as spring brake * external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection * Air suspension system including 1 raising and lowering valve * mounted on the left-hand side when driving, in front of the axle unit * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) Rear impact protection * Steel rear impact protection, solid, on the end cross member at the rear Electrical system / Electronics * Light carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of * LED license plate lighting * LED side marker lights and reflectors at the front * flashing LED side marker lights * Superseal and bayonet connectors for the lights * 2 LED outline lights with arm * mounted on multi-chamber tail light * 2 LED multi-chamber tail lights (without LCG) * Front connection 15-pole ISO 12098 (without connection cables) * Complies with vehicle class FL * AT Information Systems Kögel Telematics System Basic * Trailer including location monitoring

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2022, total length: 11,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,160 mm, color: black, Year of construction: 2022, Equipment: ABS, = Additional options and equipment = - EBS = Further information = Axle configuration Tyre size: 385/55R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Empty weight: 5,230 kg Payload: 35,770 kg Gross vehicle weight: 41,000 kg Pedpfx Aezr D Tielcsra Functional Extendable body: Yes Identification Registration number: OT-82-GT

Condition: used, axle configuration: 3 axles, first registration: 07/2018, color: other, Year of construction: 2018, Empty weight: 5.290 kg Axle 1: left 6 mm right 6 mm Predpfezpaklex Alcsa Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: repair required (used), For sale is a robust BLOHM SIMPLEX surface grinding machine in a heavy-duty industrial design. Technical data / equipment: * Manufacturer: BLOHM * Type: SIMPLEX * Travel in X-axis: approx. 600 mm * Travel in Y-axis: approx. 300 mm * Magnetic chuck * Coolant system * Automatic table feed Prodpfx Alozwv A Tjcsa * Manual feed * Heavy-duty and robust machine construction Known defect: The automatic feed is currently not functioning. However, the feed can be performed manually. Apart from this, the machine is in technically sound and operational condition. The machine is particularly suitable for surface grinding, repair work, individual parts, and general tool, mold, and machine construction. Used, condition commensurate with age. Inspection and demonstration possible by appointment. The stated selling price is the net price plus the statutory value-added tax. Sale is made commercially with an invoice.

Condition: ready for operation (used), Year of construction: 1987, A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible. Prodpszq Ecpsfx Alcja

Condition: good (used), functionality: fully functional, 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Pedoy Aic Tepfx Alcsra Model - SIMPLEX.

Condition: excellent (used), Grinding range 650x450x325mm Prsdpfx Aszhl Rnelcea Table size 600x350mm Magnetic plate 600x400mm Size of grinding wheel diameter x width x bore 400 x 80 x 127 mm Grinding wheel speeds 1400 / 2800 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: used, Manufacturer: BLOHM Type: Simplex 5 Table size: 900x300mm Pjdpfx Ajvtyxuolcjra Working length: 600x300mm Without magnetic table!

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Frame: steel painted Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Predpfx Aloiaumuecja Weight: 650 kg Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic 2 hand control Remark: good condition (some minor repairs needed)

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: Pjdpfx Ajhxzmcolcora The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Super offer: NORMECCANICA SUPER SIMPLEX rolling machine from 2018, 1300 mm wide. Psdpfx Aezaqwxslcera

Condition: used, Year of construction: 1991, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 6479-206891, input voltage: 380 V, total length: 1,550 mm, total width: 1,730 mm, total height: 1,200 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 540 kg, Equipment: documentation/manual, Semi-automatic screen printing machine "ESC", Simplex S, print format 1200x800mm, 380 V, compact space-saving design, separately controllable drives, squeegee stroke adjustment via limit switches, 3 selectable print programs, etc. Psdpfsy Ec Eyox Alcsra

Condition: repair required (used), Year of construction: 1990, functionality: fully functional, Shears for cutting reinforcing steel including measuring trolley, winch, sliding measuring stop for measuring length. Prsdpfxsvt Eqpo Alcja

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: Prsdpowp R Htofx Alcsa COATED WEB BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Condition: as good as new (ex-display), Year of construction: 2019, oil-free, two-stage 160 kW screw compressor ALMIG SIMPLEXX 160 LK (air-cooled) Built: 2019 (delivery time 2 weeks) Operating hours: 0 h Furnishing: -Controller: Air Control HighEnd Technical specifications Type: SIMPLEXX 160 LK Operating pressure max : 8.6 bar Delivery rate at 7 bar: 28.2 m³ / min installed motor power: 160 kW Protection type / insulation class drive motor: IP 55 / F Operating voltage / frequency: 400 V / 50Hz Pedpfx Asuz Uzqjlcsra Sound pressure level (DIN 45635 part 13): 73 dB(A) Compressed air connection: DN 100 Dimensions and weight: Length: 3730 mm Width: 1700 mm Height: 1995 mm Weight: 4700 kg

Condition: used, Year of construction: 2018, Konica Minolta AccurioJet KM-1 (Conversion from KM-1 to KM-1e in 2024) Approx. 9.5 million prints Printing system: LED-UV inkjet printing system with CMYK color system Resolution: 1,200 × 1,200 dpi Performance: Up to 3,000 sheets/hour (simplex) Up to 1,500 sheets/hour (duplex) Prodpfx Aljzqyyvocea Sheet format: Max. 585 × 750 mm Min. 375 × 525 mm Printable area: Simplex: 575 × 735 mm Duplex: 575 × 730 mm Material thickness: Simplex: 0.06–0.60 mm (approx. 60–600 g/m²) Duplex: 0.06–0.45 mm (approx. 60–450 g/m²) Suitable for coated and uncoated offset papers, textured papers, cardboard, packaging materials, as well as synthetic materials and plastics. Printing without primer is possible on many substrates. Feeder and delivery stack height up to 900 mm each. Machine dimensions: approx. 5,400 × 3,000 × 2,400 mm Machine weight: approx. 9,100 kg Machine operational and available shortly. Location: Western Europe Price upon request.

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White)  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals  Keys  Etc. _____ Predpfx Alev Iqimjcoa Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF:  MM6319 Bread plant comprising of: 1 x Damak conical rounder for pieces from 100g to 600g. Manufacturer - Damak Makina. Model - DM CR 2000. Date of manufacture - 2021. Capacity - 1200 to 2400 pieces/hour. Electrical requirements - 415 V / 50 hz / 3 phase. 1 x Damak 176 pocket intermediate proofer with adjustable timings for dough resting. Manufacturer - Damak Makina. Model - DM IP 176.  Date of manufacture - 2021. Input height - 800mm. Psdpfox E Aznsx Alcjra Output height - 1550mm. Fitted with removeable pockets for ease of cleaning. 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Manufacturer - Bertuetti. Model - SIMPLEX. Came out of production in November 2025 and in good working condition.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 606300, Year of construction: 2019, operating hours: 3,925 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,500 mm MACHINE DETAILS Mast type: Simplex Fuel type: electric Engine power: 2 x 25 kW Battery year of manufacture: 2023 Battery voltage: 80 V Prodpfx Alszu Nkljcsa Overall height: 3,550 mm Machine weight: 14,900 kg EQUIPMENT Fork positioner Heater Full cabin

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: T33105.1687, Year of construction: 2006, operating hours: 22,275 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,015 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12,000 kg Load center: 1,200 mm Lifting height: 5,000 mm Load capacity at load center 1,200 mm: 12,000 kg Load capacity at load center 1,500 mm: 10,500 kg Load capacity at load center 1,800 mm: 9,000 kg Front overhang C: 205 mm MACHINE DETAILS Mast type: Simplex Drive type: Diesel Overall height: 4,015 mm Weight: 21,000 kg EQUIPMENT Side shifter Fork positioner 3rd hydraulic valve 4th hydraulic valve Heater Full cab Air conditioning Psdpfxszu Nkfs Alcera

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN529636, Year of construction: 2016, operating hours: 16,112 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: gas, mast type: simplex, construction height: 2,540 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Load center: 600 mm Lifting height: 5,500 mm ISO class: 3 (2,500–4,999 kg) MACHINE DETAILS Mast type: Simplex Prsdpfxjzu Nh Rs Alcsa Drive type: Internal combustion engine Rated power: 63.0 kW Overall height: 2,540 mm Weight: 7,718 kg EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cabin Air conditioning

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN524545, Year of construction: 2016, operating hours: 9,317 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: simplex, construction height: 3,071 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,700 mm Load center distance: 500 mm ISO class: 2 MACHINE DETAILS Mast type: Simplex Drive type: Internal combustion engine Rated power: 38.0 kW Overall height: 3,071 mm Own weight: 4,100 kg Prjdpjzu Nhqsfx Alcoa EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cab

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4816, Year of construction: 1998, operating hours: 8,935 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,000 kg Pedpozu Nhkjfx Alcora Load center: 600 mm Lifting height: 4,500 mm MACHINE DETAILS Mast type: Simplex Fuel type: Diesel Overall height: 3,100 mm Weight: 6,550 kg