Used Integrating Sound Level Meter for sale (15,896)

Condition: used, functionality: fully functional, machine/vehicle number: 0162, Year of construction: 2005, load capacity: 1,000 kg, lifting height: 4,875 mm, fuel type: electric, mast type: simplex, drive type: Elektro, High-lift order picker Chassis number: 0162 Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 80V Battery type: PzS Pgodpfx Agjy Upi Rj Tsn

Condition: new, functionality: fully functional, machine/vehicle number: OVS10NEU, Year of construction: 2025, load capacity: 317 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 1,660 mm, empty load weight: 1,350 kg, total length: 1,460 mm, drive type: Elektro, construction width: 800 mm, High-level order picker Chassis number: OVS10NEU Mast type: Triplex Transmission: PMSM Condition: New unit Technical condition: New Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Pgjdpfx Agsy Upiqs Tjn Battery year of manufacture: 2025 Battery condition: New Description: - Maintenance-free PMSM drive motors with high efficiency - DC pump and steering units with extended service life and minimal maintenance requirements - Lithium battery: 24V / 150Ah - Maximum platform height: 4,600 mm - Maximum working height: 6,600 mm - Load capacity: 317 kg - 90 kg rear storage compartment - 100 kg front storage compartment - 127 kg operator platform - Drive units with suspension system for improved stability, safety, and comfort - Keyless PIN code panel with RFID card support - Electric lift and lower buttons - High-performance control grips with dual-hand safety operation - LCD display indicating speed, steering mode, operating hours, energy, error codes, etc. - Complies with EU and US regulations - Four different driving modes for various applications - Front-wheel steering for longer distances - Rear-wheel steering for tight and hard-to-reach areas - Lateral (parallel) travel possible - On-the-spot turning (very high maneuverability) possible - Automatic speed adjustment depending on lift height

Condition: used, mileage: 93,300 km, power: 101 kW (137.32 HP), first registration: 09/2010, fuel type: diesel, empty load weight: 5,130 kg, maximum load weight: 2,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space volume: 3 m³, loading space length: 3,700 mm, loading space width: 2,170 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Nissan Atleon 80.14 Flatbed with Crane First registration: 09/2010 Only 93,300 km with documentation Euro 4 emissions standard Short cab Manual transmission Air conditioning Tyres: 205/75 R17.5, tread approx. 60% Vehicle length: 6,420 mm Platform dimensions: 3,700 mm x 2,170 mm Side panels: 400 mm Wheelbase: 3,200 mm Permissible total weight: 7,490 kg Unladen weight: 5,130 kg Crane: Ferrari F561 A4 Year of manufacture: 2009 Remote control from both left and right sides 5 extensions: 4 hydraulic, 1 mechanical 2.50 m / 2,340 kg 4.15 m / 1,420 kg Pgsdpfx Agsygndvs Tjn 5.70 m / 980 kg 7.30 m / 730 kg 8.83 m / 580 kg 10.40 m / 485 kg 12.00 m / 395 kg (mechanical extension) Hook height approx. 14.80 m German vehicle in well-maintained condition. TÜV valid until June 2026. Export / net price: 25,900 Euros All information without guarantee, errors excepted.

Condition: used, mileage: 93,300 km, power: 101 kW (137.32 HP), first registration: 09/2010, fuel type: diesel, empty load weight: 5,130 kg, maximum load weight: 2,360 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space volume: 3 m³, loading space length: 3,700 mm, loading space width: 2,170 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Nissan Atleon 80.14 Flatbed with Crane First registration: 9/2010 Only 93,300 km, with documentation Euro 4 emission class Short cab Manual transmission Air conditioning Tyres 205/75 R17.5, tread approx. 60% Vehicle length: 6420 mm Flatbed: 3700 mm x 2170 mm Drop sides: 400 mm Wheelbase: 3200 mm Permissible gross weight: 7,490 kg Curb weight: 5,130 kg Crane Ferrari F561 A4 Year of manufacture: 2009 Remote control on both sides (left and right) 5 extensions: 4 hydraulic, 1 mechanical 2.50 m/ 2,340 kg 4.15 m/ 1,420 kg 5.70 m/ 980 kg 7.30 m/ 730 kg 8.83 m/ 580 kg 10.40 m/ 485 kg 12.00 m/ 395 kg (mechanical extension) Hook height approx. 14.80 meters German vehicle in well-maintained condition. TÜV valid until June 2026. Pedpfx Agjygnd As Tjgn Export/ net price: 25,900 Euro All information provided without guarantee, errors excepted.

Condition: excellent (used), Level sensor Podpemxi Ugefx Ag Tegn Make Endress Hauser Liquicap M Stock number 28420 Order code FM /51-A1AGEJB3A1A Ser.No.F20231010FO L1 449 mm

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Pedpsv Tpv Nsfx Ag Togn Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: good (used), Manufacturer: Festo Psdehwta Ejpfx Ag Tjgn Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Condition: ready for operation (used), Chain Hoist, Rema Star 111/54, 4 Meters, 3200 kg, Used Machine Manufacturer: Rema Model: Star 111/54 Podoxxkw Ispfx Ag Tegn Overall Dimensions: Width: 710 mm Depth: 360 mm Height: 460 mm Electrical Data: 380V; 4.4 kW; 10.5A Load Capacity: 3200 kg Lifting Height: 4 m Year of Manufacture: 2008

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pieces, pre-assembled, 400 x 110 cm • Beams: 48 pieces, with 426 cm clear span, profile 150 x 50 mm • Safety: 96 pieces, galvanized safety pins • Fasteners: 52 pieces, Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity sign: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Pedpfjzg U Erox Ag Tjgn Available beam lengths: 426 cm and 566 cm Matching depth beams, shelf inserts, and shelf boards available upon request 💰 Price: €2,250,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: immediately available • Inspection and pickup: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Changes and errors in the technical data, information, and prices, as well as prior sale, are subject to change! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly, 30–50 semi-trailer trucks of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-inclusive package: 1. Lump-sum purchase: Purchase of merchandise, equipment, and complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service, provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete clearance. Whether you found us through heavy-duty racking or are looking for a galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,841 h, load capacity: 1,000 kg, lifting height: 5,415 mm, fuel type: electric, mast type: simplex, construction height: 2,900 mm, drive type: Elektro, High-lift order picker Mast type: Standard Podpfxszg Ryfs Ag Tegn Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V

Condition: used, Year of construction: 2013, - Brand : Omme - Type: 2500 ED - Year of construction: 2013 - Weight: 3300 kg. - Hours diesel engine: 4787 hours - Drive: Kubota diesel - Working height: 25 meters - Lateral reach: 13 meters - Wheel Drive / Movers - Dutch license plate registration - Safety inspection valid until 12-11-2026 - Aerial work platform book available - Maintenance history available - CE document available * Brand: around * Working height: 25 meters *Type: 2500 EBDZ * Drive: Kubota diesel * Lateral reach: 13 meters * Construction year: 2005 * Weight: 3500 kg. Podpfx Agsy T R R Hs Togn * Hours diesel engine: 3526 uur * Hours electrical motor: 1290 uur

Condition: used, New: No Color: Gray Pjdpfx Aey S S Tgog Tjgn Part suitable for: vans Overall condition: good Technical condition: good Optical condition: good

Condition: used, Safe - Value Safe Hermann Security class: D 1 Year of manufacture: 1978 Internal dimensions (lockers): W=580 mm, D=400 mm, H=470 mm Internal dimensions (lockers): W=600 mm, D=400 mm, H=980 mm Pgedpfxoxcilxe Ag Tjn - Combination lock and key lock with boltwork - 1 piece key for the boltwork - 3 internal compartments, 2 keys available, 1 key missing - Front locking via 5 locking bolts ø 40 mm - Rear grip on the hinge side External dimensions: W=1010 mm, D=840 mm, H=1850 mm Weight: 3100 kg

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t Pgjdpfxou Ic Dys Ag Ton space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls Pgedpsu Ic Ewefx Ag Tjn model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: material width: 200 mm material thickness: 1,5 mm Number of Straightening rolls: 5x oben/upper/arriba no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable Pjdpsu Ic D Tsfx Ag Tegn *

Condition: used, functionality: fully functional, machine/vehicle number: HR32056, Year of construction: 2012, operating hours: 1,071 h, load capacity: 1,200 kg, lifting height: 1,500 mm, free lift: 100 mm, fuel type: electric, mast type: duplex, construction height: 1,820 mm, fork length: 1,160 mm, empty load weight: 1,500 kg, drive type: Elektro, High-lift order picker Chassis number: HR32056 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Pgjdeu Arz Rjpfx Ag Tsn

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Pjdpfx Aofin Hweg Tegn Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control Pgjdpfjvwm A Ijx Ag Tjn - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor for back gauge & linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety guards with switches CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Pgjdpfxjfirwmj Ag Tsn Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport _____ With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services relating to training and customer support. We would be happy to support you from Germany – from consulting, through purchase, and throughout the entire life cycle of your machine. With our German branch, we are always on site to provide quick and efficient support. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Axes: Y1, Y2, X, R Podpfx Asfin Hcog Togn Control: Delem 66 T or 69 T (selectable) CE standard with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Durma upper tool Durma lower tool CNC-controlled motorized crowning Overhang: standard 510 mm or selectable 750 mm, 1000 mm Back gauge: motorized & linear guide & ball bearing system Back gauge fingers: height-adjustable Back gauge motor: AC type Adjustable support arms with linear guide along the entire length Technical data available upon request.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Pgodpfxofiqdco Ag Tsn Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor for rear back gauge and linear ball screw system (X-R) CNC crowning Pgodpfx Agofiryfs Tjn European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment: Control unit - ModEva Premium, 69T and 66T CE manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Pedpofiqa Rsfx Ag Tjgn Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Pjdpfx Asw Uan Aeg Tegn Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics