Used center lathes 800-999mm turning diameter over bed for sale (59)

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm Iedpsxwp Ehjfx Aa Ioia centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Accessories *2 rotary chucks with replacement jaws Iijdpfewwl Izjx Aa Iea *5 Multifix holders *Set of interchangeable wheels *Various tips and accessories

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm Iedewc Dzwspfx Aa Ijia --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev 3 - jaw chuck Multifix steel holder size B, 1 x inserts 2 x travelling steady rest, Operating instructions

Condition: ready for operation (used), Year of construction: 1986, spindle bore: 76 mm, turning diameter: 830 mm, center width: 3,000 mm, turning length: 3,000 mm, overall weight: 5,500 kg, Acu-Rite 2-axis digital readout, rapid traverse, capacity 3000 x 830 mm, spindle bore 76 mm, 2 steadies, 2 four-jaw chucks (700 and 500 mm). Iedpeyw Nzfofx Aa Isia

Condition: used, Year of construction: 2000, control Siemens Sinumerik 805 turning length 1350 mm Turning diameter above the facing slide 570 - 365 mm spindle passage 60 mm --> Technical Specifications Precision universal lathe with programmable cycles Iiodpfx Aasyu U Auj Ija --> Siemens Sinumerik 805 control system --> Turning length 1350 mm --> Swivel diameter of bed cross slide 570–365 mm --> Cross slide travel 345 mm --> Tool cross-section DIN 770h x b 32 x 25 mm --> Spindle bore 60 mm

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Iijdpfoxn Ty Rjx Aa Ija Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: used, Year of construction: 1977, centre height 200 mm centre distance 1.000 mm spindle turning speed range 1600 U/min spindle bore 42 mm turning length 1600 mm turning diameter over bed 410 mm Iiodpfeyv N Rkox Aa Ija 230 mm machine weight ab. 1.700 kg dimensions 2000 × 1000 × 1500 mm

Condition: used, turning diameter over bed 330 mm Iiodpfeyv N Nyex Aa Ija centre distance 650 mm spindle bore 36 mm weight of the machine ca. 600 kg

Condition: used, Year of construction: 2008, turning diameter over bed 280 mm Turning diameter over slide 170 mm centre height 220 mm centre distance 1600 mm Spindle Speed 25-1320 UpM spindle bore 75 mm tailstock quill taper MT 4 weight of the machine ca. 2025 kg Iijdpfx Asyv Nrhoa Iea

Condition: ready for operation (used), Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore Iijdpfx Asxabh Tja Ioa - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: used, Year of construction: 1983, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 10,000 mm, For sale: PORĘBA TPK-80/10M universal lathe, year of manufacture 1983, in very good technical condition. Availability: in stock, under power, available for inspection and testing at any time. Standard equipment: Tailstock Coolant pump Tool holder Additional equipment: 1 x Traveling steady 1 x Steady rest 40–400 mm 1 x Steady rest 400–600 mm 1 x 3-jaw self-centering chuck Ø 500 mm Technical specifications: Distance between centers / turning length: 10,000 mm Swing over bed: 800 mm Swing over carriage: 530 mm Swing in gap: 1080 mm Spindle bore: 95 mm Max. workpiece weight: between centers: 6,000 kg between centers + 1 steady rest: 7,500 kg between centers + 2 steady rests: 9,000 kg Number of spindle speeds: 21 Speed range: 8 – 800 rpm Number of feeds: 80 Feed range: Longitudinal: 0.1 – 12.8 mm/rev Cross: 0.05 – 6.4 mm/rev Main motor power: 16/22 kW (1st / 2nd gear) Dimensions: Total length: 12,500 mm Width: 1,800 mm Height: 1,800 mm Iisdpfx Aasyxgm Ue Ija Weight: 11,200 kg

Condition: excellent (used), L & Z Lathe NARDINI Type MS 175 E Center height: 175 mm Swing over bed: 350 mm Distance between centers: 800 mm Iijdpfx Aajyq Nvnj Ija Spindle bore: 46 mm Spindle speeds: 25 - 2000 rpm Weight: 1250 kg

Condition: good (used), NARDINI MS 125 E / Lead and Feed Screw Lathe - Center height over bed: 150 mm Iiodpfx Aaeyam Slj Ija - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Bar capacity: 34 mm - Spindle speeds: 50 - 2500 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial, etc. - Tailstock: MT 3 - Quick-action collet chuck type 173E incl. 16 collets - Multifix toolpost with inserts - Change gears - Tool cabinet incl. various tools - Machine feet - Chip guard - Drill chuck & live center - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm turning length 1700 mm Iiodpfxoytg Uye Aa Ija swing diameter over bed slide 600 mm total power requirement 12,5 kW

Condition: used, turning diameter over cross slide: 690 mm, spindle bore: 180 mm, turning diameter: 1,300 mm, turning diameter over bed slide: 1,040 mm, center height: 500 mm, quill diameter: 130 mm, quill travel distance: 2,000 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 4 rpm, overall weight: 8,700 kg, tailstock quill stroke: 420 mm, Lathe in excellent condition, ready for use. Viewed. Iisdpoypbfxsfx Aa Ioa

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available within 3 to 3,5 months, will be generally overhauled for Customer´s order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Iijdsiwa Iajpfx Aa Isa Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg Isdpfx Ajv Ab Dqsa Isia - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Isdpfx Asv Rm Iwea Isia

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. MTP METAL LATHE 800x3000 7.5 kW SPINDLE BORE 105 Packaging condition: original LATHE CQ6280 800 x 3000 mm The machine tool is designed for machining workpieces, most commonly with rotational geometry (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical data: Max. workpiece length: 3000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing over gap: 1035 mm Z1 axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16) 25 – 1,600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Isdpfxoyz Ubxs Aa Ioia Spindle taper: MT5 Feed X-axis: (25) 0.022 – 0.74 mm/rev Feed Z-axis: (25) 0.044 – 1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock offset: 11 mm / 0.4" Metric threading: (54) 0.45 – 120 mm Diametric threading: (42) 0.88 – 160 DP Module threading: (46) 0.25 – 60 mm Whitworth threading: (54) 7/16 – 80 TPI Main motor power: 7.5 kW Power supply: 400 V Overall dimensions (L x W x H): 4740 x 1140 x 1910 mm Weight: 4300 kg Equipment: • 3-axis digital readout • 3-jaw chuck Ø 320 mm • 4-jaw chuck Ø 400 mm • faceplate Ø 450 mm • drive plate • fixed splash guard • cooling system • steady rest max. Ø 250 • follow rest • chuck guard • reducing sleeves • dead center • tools

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. UNIVERSAL LATHE MTP 800x2000 7.5 kW SPINDLE BORE 105 + DRO Manufacturer code: CW6180X2000 UNIVERSAL LATHE 800 × 2000 Iiedpjyzz Sqefx Aa Ioa The machine is designed for machining workpieces, most commonly rotational solids (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical Data: Max. turning length: 2000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in gap: 1035 mm Z-axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16 steps) 25–1600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022–0.74 mm/rev Feed Z-axis: (25) 0.044–1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock adjustment: 11 mm (0.4") Metric threading: (54) 0.45–120 mm Diametral threading: (42) 0.88–160 DP Module threading: (46) 0.25–60 mm Whitworth threading: (54) 7/16–80 TPI Main motor power: 7.5 kW Power supply: 400 V Dimensions (L×W×H): 3740 × 1140 × 1910 mm Weight: 3800 kg Equipment: 3-axis digital readout (DRO) 3-jaw chuck Ø 320 mm 4-jaw chuck Ø 400 mm Faceplate Ø 450 mm Drive plate Splash guard Cooling system Fixed steady rest max Ø 250 mm Traveling steady rest Chuck guard Reduction sleeves Dead center Tool set

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. MTP LATHE CQ6280 800x1500 WITH DIGITAL READOUT Manufacturer code: CQ6280 800x2000 with display LATHE CQ6280 800 × 1500 mm The machine is designed for machining workpieces, most commonly rotational solids (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical Data: Max. turning length: 1500 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in gap: 1035 mm Z-axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16 steps) 25–1600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022–0.74 mm/rev Feed Z-axis: (25) 0.044–1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Ijdpfxeyzzghj Aa Ieia Tailstock quill travel: 235 mm Tailstock adjustment: 11 mm (0.4") Metric threading: (54) 0.45–120 mm Diametral threading: (42) 0.88–160 DP Module threading: (46) 0.25–60 mm Whitworth threading: (54) 7/16–80 TPI Main motor power: 7.5 kW Power supply: 400 V Dimensions (L×W×H): 3240 × 1140 × 1910 mm Weight: 2600 kg Equipment: 3-axis digital readout (DRO) 3-jaw chuck Ø 320 mm 4-jaw chuck Ø 400 mm Faceplate Ø 450 mm Drive plate Splash guard Cooling system Fixed steady rest max Ø 250 mm Traveling steady rest Chuck guard Reduction sleeves Dead center Tool set

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Iodpfx Aoyy Nx Nja Ioia Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: refurbished (used), Year of construction: 2026, Conventional Lathe type TR 135B2 x 6m after general overhaul, equipped with a heavy tailstock and compound with T-slots. Technical data: Swing over bed: 1350 mm Swing over carriage: 1000 mm Distance between centers 6000mm Maximum workpiece weight between centers: 9,000 kg Maximum workpiece weight between centers with one steady: 10,500 kg Maximum workpiece weight between centers with two steadies 12,000 kg Special equipment included in the price of the lathe: - 4-jaws independent chuck dia. 1000mm - roller steady rest dia. 40-400mm - roller steady rest dia. 400-600mm - automatic lubrication for the carrriage, - lighting lamp, - cooling system.. Isdpfok Itipex Aa Ioia 12 months material warranty.

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A Iodpfx Aajqn A Rne Isia connected load 65,00 kW

Condition: new, neu Bulgarien 460 € 2276.69 € 890 mm 3000 mm Iiodpjyq Sq Usfx Aa Ija 400 mm 155 mm 490 mm 700 mm 15 160 M 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turning length2.000 mm € 109 230,00 turning length4.000 mm € 128 740,00 turning length5.000 mm € 139 980,00 turning length6.000 mm € 156 880,00