Used Okaya Mains Filter Interference Filter for sale (15,400)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Ledpozu Aibofx Aazort Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109239, Technical characteristics: Work Area # Chuck diameter: 260 mm # Maximum workpiece weight: 150 kg # Swing diameter: 280 mm # Maximum workpiece diameter/height: 200/200 mm # X-axis travel (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN # Z-axis travel: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN # Loading time: 5-6 sec # Standard enclosed automation (number of loading stations based on workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: 4,500 rpm # Power at 100% / 40% duty cycle: 25 / 18 kW # Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools # Tool shank interface according to DIN 69880: 12 positions - BMT65 # Number of tool stations: 12 # Maximum tool length including holder: 200 mm # Maximum speed: 6,000 rpm Lrjdjxxir Dopfx Aazet # Maximum torque: 27 Nm at 10% duty cycle, 14 Nm at 100% duty cycle Electrical Equipment # Operating voltage: 400 - 480 V, 100 A # Connected load: 36 kVA Dimensions # Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm # Machine weight: 9,000 kg Main Features and Capabilities: # Vertical design: Optimized for chip removal with easy loading/unloading. # CNC control: GE Fanuc FS 32i B. # High precision: Positioning accuracy in X, Z axes ±0.001 mm with Heidenhain linear scales. # Powerful main spindle: High power and broad speed range. # In-process control: Marposs T25 measuring probe. # Fully automated loading/unloading: Emag O-Type; workpieces are automatically loaded and unloaded via integrated automation. # Driven tools: Enables drilling and milling operations within the machine. # Tool life monitoring with sister tool management. # Chip conveyor and coolant filtration unit: Micron filter with paper filter, 40 bar pumps (suitable for filtering two machines). # Fully enclosed work area, internal work light. # Documentation: Electronic version available (book version incomplete). Machine status: OPERATING

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 109242, Technical specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Max. workpiece diameter/height: 200/200 mm - X-axis stroke (effective travel): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading positions per workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Tool Turret with Driven Tools - Tool holder with cylindrical shank per DIN 69880: 12 positions - BMT65 - Number of tool stations: 12 - Max. tool length (incl. holder): 200 mm - Max. speed: 6,000 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Electrical System - Operating voltage: 400 – 480 V, 100 A - Connected load: 36 kVA Dimensions - Overall dimensions: Length = 5,300 mm (with chip conveyor), Width = 2,300 mm, Height = 3,650 mm - Weight: 9,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and easy part loading/unloading - CNC control: GE Fanuc FS 32i B - High precision: Positioning accuracy (X/Z axes) ±0.001 mm; equipped with Heidenhain linear scales - Powerful main spindle: High output and large speed range - In-process measurement: Marposs T25 probing system Lrjdsxxit Uspfx Aazjt - Fully automated loading/unloading: EMAG O-Type—parts are loaded and removed by integrated automation - Live tooling: Allows for drilling and milling operations beyond standard turning - Tool life monitoring with sister tool management - Chip conveyor and coolant filtration unit: Micron filter with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, illuminated for safe and easy operation - Documentation: Electronic documentation available (hard copy not complete) Machine status: Operational (in production)

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Lodpfxexl Upbo Aazort

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Lredpfxezxfnzo Aazet Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 25 h, functionality: fully functional, overall weight: 2,300 kg, fuel type: diesel, continuous power (apparent): 126 kVA, For sale is a reliable backup generator suitable for factories, etc., with a powerful 126 kVA capacity to power numerous devices and machines. The FTP engine has undergone a thorough inspection, with oils and filters replaced, and is in fully working condition. The Mecc Alte generator produces up to 126 kVA. This unit was installed in a single hall and used only once for 3 hours! We can also perform custom installation on the generator and deliver it to the specified address! More information from the seller. Automatic operation system: Thanks to the built-in ATS system, the generator is in "standby" mode and is constantly ready for automatic start-up in the event of a power outage. The operating principle is simple: after a predetermined time from the moment of the power outage, the generator will start automatically; upon power restoration, the generator will shut down, switching back to the mains power. This solution is ideal for restaurants, offices, and manufacturing companies – anywhere where the generator serves as an emergency power source. Additional advantages include a) maintenance-free operation, b) no need for third-party intervention in generator operation, c) the fastest possible power restoration in the facility. ✔ Automatic battery charging ✔ Reliable starting ✔ Possible connection in single-phase and three-phase installations ✔ Mechanical lock Mecc Alte 126 kVA = 101 kW AC generator Manufacturer: English Mecc Alte Model: ECP 24 2S4 Fuel: Diesel Year of manufacture: 2017 – but never used. Serial number: 0002006067 Hour meter reading: 10 M/h Weight (kg): 2300 IP: 23 Power: 126kVA CE marking: Yes Dimensions: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m Note: The stated price is net and applies to export and for businesses. A significant discount is possible for individual customers – We invite you to contact us directly by phone to get your best price. Lrodpfx Aov Rbt Uoazst ————— After price negotiations, we can provide a detailed video or perform a computer test or paint thickness measurement (for a serious customer) to ensure comfortable conditions for purchasing the equipment remotely. —————- Of course, we encourage you to visit for an inspection, but if this is not possible, this form of purchase will be available, guaranteeing a safe transaction. Additionally, the possibility of obtaining a technical warranty with unlimited mileage assistance. ————— THIS ADVERTISEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1 OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS, INCOMPLETE INFORMATION CONTAINED IN THE ADVERTISEMENT, OR THE ADVERTISEMENT BEING OUTDATED.

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Lredpfevkgvhjx Aazjt Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 Lredpfx Aoxmhdnsazjt The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: used, Radial fan with an aluminum cast housing, Lrsdpfxeztrv Io Aazjt filter fan Motor power: 1.8 kW Mains connection: 380 volts, 50 Hz Weight: approx. 30 kg

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Lodpfjzump Ejx Aazert Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system Lrjdpfjxw Sviox Aazot - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: used, mileage: 161,050 km, power: 84 kW (114.21 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,267 mm, total width: 2,020 mm, total height: 2,356 mm, loading space length: 2,700 mm, loading space width: 1,770 mm, loading space height: 1,750 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 4797X ----Why autonext? Over 400 passenger cars & commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Entire vehicle range available on autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to see the vehicle completely from the outside and inside: Top condition! 1st owner, German vehicle, non-smoking vehicle Perfectly maintained service history, exclusively at Mercedes Benz Next service in 439 days Automatic transmission Rearview camera Controlled air conditioning (Tempmatik) Multimedia system MBUX (7" touchscreen) Seat heating Upon request, we offer an additional trailer coupling for only 599,- Euros, and if possible, an increase in the trailer load capacity to up to 3.5 tons. ---- Special features: * Basic package * Towing eye rear * Exterior mirrors, electrically adjustable and heated, both sides * Heat-insulating glass * Preparation for DAB radio reception * Radio preparation * Two-way speakers in front * Storage compartment under the dashboard on the passenger side * Entry handle on the rear pillar, rear right * Seats in the cab: Passenger seat adjustable * Seats in the cab: Passenger seat with armrest * Seats in the cab: Driver's seat with armrest * Storage compartment above the front windshield * Steering wheel (steering column mechanically adjustable) * Multimedia system MBUX (7" touchscreen) * Hands-free system Bluetooth Ledpezv A Duofx Aazsrt * Steering wheel with multifunction * DAB tuner (digital radio reception) * Window in the loading/passenger compartment: - fixed, front right * Noise reduction measure exterior * Wooden floor in the cargo area * Comfort automatic climate control Thermotronik * Cargo area partition with window * Cable duct on the rear portal * Cable duct on the side panel * Spare wheel in driving condition * Spare wheel holder under the frame end including jack * Rearview camera * Windshield wipers with rain sensor * Seats in the cab: Passenger double seat * Seats in the cab: Driver's seat heated * Paneling in the loading/passenger compartment: Wood high (up to the roof) * Lashing rails in the cargo area - side panel on the bulkhead Standard features: 3rd brake light, Adaptive brake light, Airbag driver side, Hill-start assist, Anti-lock braking system (ABS), Traction control system (ASR), Drive type: Front-wheel drive, Display for washer fluid level, Outside temperature gauge, Brake assistant, Automatic headlight activation, Entry handle for sliding door on cargo area partition, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: Crosswind assist, Power windows electric 2-fold, Transmission automatic GTronic - (9-speed), Rear door (opening angle 180 degrees), Body/structure: Standard van, Keyless start, Child safety lock, Communication module (LTE) for digital services, Fuel tank: Main tank 65 liters, Headlamp range adjustment, Truck registration, Mercedes-Benz emergency call system, Engine 2.1 liters - 84 kW CDI KAT, Particle filter, Wheelbase 3259 mm, Low emissions according to emission standard Euro 6d-TEMP, Sliding door loading/passenger compartment right, Seat belt system with warning system (driver's side), Seat cover / upholstery: Fabric, Seats in the cab: Driver's seat adjustable, Start/stop system en

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,215 mm, overall weight: 620 kg, controller manufacturer: SIEMENS, controller model: Sinumerik ONE, number of slots in tool magazine: 40, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar Ljdpfx Aaex D E Hbszsrt • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 108113, Technical Characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse Z: 30 m/min - Standard automation with closed system (number of loading nests by workpiece diameter: 14/(80–200), 18/(30–160), 30/(30–85)) Main Spindle - Spindle interface per DIN 55026: Size A5 - Maximum spindle speed: 6000 rpm - Power (100% / 40% duty cycle): 18.1 / 13.9 kW - Torque (100% / 40% duty cycle): 77 / 59 Nm Tool Holder with Driven Tools - Tool shank per DIN 69880: 12 – BMT65 - Number of stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque (10% duty cycle): 27 Nm; (100% duty cycle): 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Total dimensions (L x W x H): 4350 mm (with chip conveyor) x 1600 mm x 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical Design: Optimized for chip removal and easy loading/unloading - CNC Controller: GE Fanuc FS 32i B - High precision: Positioning accuracy in X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and broad speed range - In-process control: Marposs T25 measuring probe - Automated loading/unloading: Integrated automation for feeding and removing parts - Live tools: Capability for drilling and milling operations - Tool life monitoring and sister tool management - Chip conveyor & Knoll coolant filtration unit with paper filter and 40 bar pumps (suitable for filtering two machines) - Fully enclosed work area, with work area lighting - Documentation: Electronic version available, printed booklet incomplete Lodpfx Asxxip Aeazert Machine Status: - NOT WORKING - LT motor defective, repairable - Operator panel, safety switch, and two buttons broken and need replacement

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 machine for sale. The machine underwent its last maintenance check in March 2026, during which no significant issues were identified. The machine is fully functional and has since been taken out of production. It is in good condition and is currently located in France. Technical specifications of the machine: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Lrjdpfx Aszlnb Doazet Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approx. 500 kg Number of binding wires: 5 vertical Dimensions of feeding hopper: 1420 x 972 mm Weight of press: approx. 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm Ledpowtd A Nsfx Aazjrt - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Lredjwbqrtepfx Aazet Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, power: 141 kW (191.71 HP), Year of construction: 2020, operating hours: 2,745 h, Equipment: ABS, air conditioning, all wheel drive, front linkage, * General Data * Model: JCB FastTrac 4190 * Year of Manufacture: 2020 * Vehicle Type: Compact Tractor/Carrier Vehicle (FastTrac Series) * Application: Construction, Agriculture, Off-Road Operations, Material Transport * Dimensions and Weight * Wheelbase: approx. 2981 mm * Overall Length: approx. 5270 mm * Width: approx. X mm (with/without attachments) * Attachment/Stability Features: Integrated profile/side guidance, optional ballast weight * Operating Weight (unladen/approved): approx. 12990 kg * Engine and Performance Data * 60 km/h approval * Engine Version: Diesel engine (Common-Rail/Turbocharger depending on equipment) * Displacement: approx. 6596 cm³ Lrjdpfozl Itgex Aazjt * Power: approx. 141kW * Fuel System: Turbocharger, exhaust aftertreatment (e.g. DPF depending on model) * Cooling: water-cooled engine, oil cooler * Drive and Chassis * Drive: All-wheel drive (4x4) or all-wheel drive/rear-wheel drive, optional automatic brake control * Transmission: hydrostatic or synchronized manual transmission (depending on version) * Oscillating Axle/Steering: Steering angle for tight spaces * Ground Clearance: approx. 300 mm * Payload/Lifting Forces: Lifting capacity according to model designation * Hydraulics and Accessories * Hydraulic Pressure: approx. 180 bar * Hydraulic Flow: Main circuit/secondary circuit depending on version * Pressure and Flow Control: Proportional control, joystick operation * Connections: Quick couplings, front/rear hydraulics * Front Loader Compatibility: yes * Attachments/Equipment Features * Front Loader: * Rear Hydraulics: available * Quick Change Systems: available, type (e.g. oil hose quick change system) * Front Attachment (e.g. front hydraulics) * Cabin and Ergonomics * Cabin Type: enclosed operator cabin * Field of View: 360° all-round visibility, large front window * Driver Comfort: Steering wheel adjustment, seat comfort, air conditioning/heating * Operation: Joysticks/multifunction lever, button layout * Noise Level: typical value in the interior (dB/A) * Electrical System and Systems * On-board Voltage: 12V * Display/Control Panel: Multifunction display, telemetry option * Safety: Hill start assist, optional reversing camera, retractable warning signs * Diagnostic System: OBD/manufacturer diagnostic tool available * Safety and Protection * Rollover Protection (ROPS)/Sun Visor: available * Seat Belts: 3-point seat belt * Hydraulic Protection/Covers: Fenders, covers * Lighting: Work lights front/rear, turn signals * Maintenance and Condition * Maintenance Condition: regular maintenance according to manufacturer's schedule * Oil/Filter Change Intervals: according to manual * Special Features (reflection of equipment) * Modern Comfort Package: Air conditioning, radio, USB port * Telemetry Option: Fleet management available * Safety Extras: Reversing sensor/camera, immobilizer * Fassi loading crane F135A.2.23 * Linear remote control * Hydraulic winch V20 * 3-point support * Swivel supports * Operation with two-shell grapple possible * Additional hydraulics at crane tip with quick coupler * 420° swivel range The JCB machine is available immediately, subject to prior sale.

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Lrjdpfjzt Ihmox Aazjt Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, mileage: 362,217 km, power: 120 kW (163.15 HP), first registration: 01/2021, Year of construction: 2021, DB Sprinter 316 CDI Kiesling refrigerated box van with side door, Thermo King C 450 refrigeration unit - 2 units available (280,265, 362,754 km) - In very good condition! • Engine: 2.1 L - 120 kW CDI catalytic converter • Low emissions according to Euro 6 emissions standard • 6-speed manual transmission • Air conditioning • Cruise control • Speed limiter 120 km/h • Brake assist • Electronic brake-force distribution (EBD) • Driving assistance system: Crosswind assist • Anti-slip regulation (ASR) • Mercedes-Benz emergency call system • Fuel tank: Main tank 71 liters • Truck registration • Acoustic package • Navigation system for MBUX multimedia system • Airbag, driver's side • Heat-insulating glass • Storage compartment above the windshield • Seats in the cab: Driver's seat adjustable • Seat cover/upholstery: Fabric • Safety belt system with warning system (driver's side) • Seats in the cab: Passenger double seat • USB port in the center below the dashboard (charging function only) • Charging package dashboard (USB ports and 12V socket) • Communication module (LTE) for digital services • Rear wall paneling • Steering wheel (steering column mechanically adjustable) • Exterior mirrors, electrically adjustable and heated, both sides Lredpfx Aszfxnzjazst • Outside temperature display • Headliner in the cab • Automatic activation for headlights • DAB tuner (digital radio reception) • MBUX multimedia system (7" touchscreen) • Passenger-optimized center console (without storage compartment in the center console on the right) • Terminal block for electrical connections (driver's seat base) • 1 DIN slot in the front below the dashboard, passenger side • Maintenance interval indicator Assyst • Adaptive brake light • Headlight range adjustment • Side marker lights • Generator 200 A • Fleece battery 92 Ah • Front engine drive with support for additional refrigerant compressor • Fuel filter with water separator • Display for windshield washer fluid level • Towing eye, rear • Gross vehicle weight: 3,500 kg • Unladen weight: 2,590 kg • Payload: 910 kg • Wheelbase 3665 mm • Vehicle dimensions: 6,050 x 2,015 x 2,940 mm (L x W x H) • Suspension: Stabilization level II • Tires: 235/65 R16C • Tire tread: 6/7 / 3/3 KIESLING - Deep-freeze box van • Type: Cooler Flitzer • Internal dimensions: 3,310 x 1,850 x 1,900 mm (L x W x H) • Side door on the right • Rear portal doors • Floor: Diamond plate • Lashing rails on the left and right, in the center • Stop rails at the bottom • Rear steps THERMO KING refrigeration unit, type: C 450 MAX • Suitable for deep-freeze applications • MINUS 20° Celsius! • Refrigeration while driving and when stationary! • Temperature recorder - First owner! - German vehicle! - TÜV/AU (technical inspection/emission test) upon request and for an extra charge: new! Errors and prior sale excepted!

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Lrsdozic Elspfx Aazjt - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: ready for operation (used), Year of construction: 2024, operating hours: 235 h, controller manufacturer: FANUC, This PALMARY PCB-4520-3 centerless grinding machine was manufactured in 2024. It features a workpiece diameter capacity of Ø8–60 mm and a maximum workpiece length of 150 mm. The machine includes an automatic unloading attachment and adjustable speed for enhanced efficiency. If you are looking to get high-quality grinding capabilities, consider the PALMARY PCB-4520-3 machine we have for sale. Contact us for further details. Standard Features • Maximum Grinding Diameter: Ø60 mm • Regulating Wheel Speed: 30 rpm • Grinding Wheel Speed: 1,200 rpm (max. 45 m/s) • Grinding Processes: Infeed Grinding and Throughfeed Grinding • Integrated Dressers: 2 • FANUC CNC Control System • Adjustment Cart and Flange • Grinding Wheel and Flange • Standard Stopping Type Grinding Table • Stopping Type Blade • Diamond Dresser (2 pcs/set) • Main Axis Lubricating Device • Pilot Lamp Optional Equipment • Paper Filter (80 L/min with 260 L Tank) • Magnetic Coolant Separator (80 L/min) • Grinding Wheel Inverter (15 HP) • Fully Enclosed Splash Guard • Jib Crane for Grinding Wheel Change (PCB-45) • Vibration Meter for Manual Grinding Wheel Balancing (KINIK KGB-2010) • Throughfeed Table for Small Diameters (Ø8–38 mm) • Throughfeed Table for Large Diameters (Ø35–60 mm) • Automatic Unloading Attachment (Throughfeed Grinding) • Adjustable Speed • Workpiece Diameter Capacity: Ø8–60 mm • Maximum Workpiece Length: 150 mm Lodpfx Aozhmunoazort • Additional Infeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Additional Throughfeed Blade Set (t = 6 mm, 13 mm, 20 mm) • Spare Flange for Adjustment Cart and Adjustment Wheel Additional Information • Machine has no CE Certificate

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, furniture manufacturing plants, Lodpfx Asz A T Hqsazjrt craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Lrodoy Tybnopfx Aazot Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 48 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Tool measuring arm Workarea light Coolant gun Internal coolant supply Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Ledsxdlynopfx Aazsrt Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Weight kg: 7.800