Used Schmalz Vacumaster Basic 90 for sale (12,110)

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,103 kg, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra C-F-HP was manufactured in 2016, featuring a load capacity of 90 kg and a reach of 3100 mm. It includes the KRC 4 controller, enhancing its operational flexibility. Consider the opportunity to buy this KUKA KR 90 R3100 extra C-F-HP robot arm. Contact us for more information about this machine. Additional equipment • 2 units available Machine Benefits Technical Machine Benefits • Range: 3100 mm Klodpfx Amjyaiiaj Eer Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Kljdpeyalmbefx Am Eor • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. Kodpfx Asyizugom Ejlr • Table size: 920 x 380 mm Additional equipment • EROWA Robot Multi automation Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Kledpoyaqinjfx Am Ejr Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change tool post Machine Benefits Technical Machine Benefits • Distance between centers / turning length: 5000 mm • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: ready for operation (used), Year of construction: 2018, overall weight: 140 kg, This KUKA KR 90 R3700 prime K robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision for various industrial applications. Consider the opportunity to buy this KUKA KR 90 R3700 prime K robot arm. Contact us for more information. Additional equipment • E S13 055 CTR PNT EPS AIR • E S36 038 CTR PNT EPS AIR Machine Benefits Technical Machine Benefits • Supply voltage: 3x400v • Frequency: 50/60hz • Charge full-load current: 22a Kledpfxeyaiige Am Eor • Mains fuse: 25a • Robot 1: 98,57 hours / robot 2: 136,17 hours Extra Information Second similar robot available.

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: SIEMENS, controller model: SIVATIC HMI, This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information. Additional equipment • Including: 2 x paternoster magazines for film rolls Machine Benefits Kljdjx D Hy Aepfx Am Eor Technical Machine Benefits • Heating plate format (mm): 2850 x 1550 • Electric heating plate design: aluminum heating plate top • Total pressing force (kn): 2400 / chamber pressure max (bar): 6 / operating temperature max: 180 degrees celsius / batch or workpiece size max (mm): approx. 2460 x 1180 • Thermoplastic film in rolls, width of the film: approx. 1430 mm / thickness of the film (mm): approx. pressure chamber height (mm): max. Up to 180 • Connection values: installed power (kw): approx. 46 / required air pressure (bar): approx. 8

Condition: used, mileage: 147,000 km, power: 66 kW (89.73 HP), fuel type: diesel, gearing type: mechanical, first registration: 03/2006, loading space length: 330 mm, color: white, number of seats: 3, Year of construction: 2006, Equipment: had accident, power assisted steering, The vehicle is in good condition but is not operational as the injection pump needs to be replaced. The vehicle is sold as seen, in its current state. Equipped with a rigid box body (removal van) and roof rack. VAT at 22% is excluded. Transfer of ownership costs excluded. Payload: 900 kg Klsdpfey A T Rbox Am Ejr Body length: 3.3 m For information, contact via WhatsApp.

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Kljdpfx Amsylmamo Esr Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, tire condition: 80 %, color: yellow, Year of construction: 2025, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights Klsdpfsyylapjx Am Eer 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm Kledpfxeuhxqmj Am Esr output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: used, Year of construction: 1993, spindle diameter 102 mm x-travel 1600 mm y-travel 1000 mm z-travel 1600 mm Control Heidenhain Kodpfx Aeyt R Ecom Ejlr type TNC 410 table surface area 1000x1120 mm Table load 3000 kg spindle stroke 710 mm spindle turning speed range 4-1600 U/min main drive motor 13 kW weight of the machine ca. 12 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, power: 66 kW (89.73 HP), Year of construction: 2022, operating hours: 212 h, maximum speed: 20 km/h, Operating hours: 212_____Max. lifting capacity 2,500 kg Max. lift height 4,800 mm Max. outreach 2,600 mm Length to attachment carrier 3,320 mm Width 1,540 mm Height 1,975 mm Total weight with forks 5,120 kg Total weight without forks 4,950 kg Motor: Electric - emission-free Power 66 kW (90 HP) Maximum speed 20 km/h Lead-acid battery 48 V Nominal capacity 960 Ah Cab: semi-open cabin ROPS/FOPS Heated seat Sunblind Roof window wiper Digital display 4x1 joystick, electronic, with capacitive release including direction switch Telescopic boom, 2-piece Attachment carrier: quick-change carrier type ZM2S Kledpfxetxgqlo Am Esr Steering: rear-wheel steering Drive: permanent all-wheel drive Brake system: negative electrohydraulic parking brake Regenerative braking system Oil-immersed brakes at the front Hydraulics: load sensing variable displacement pump Working hydraulics flow: 42 l/min Working pressure: 210 bar Flow-sharing control block Electrics: charging voltage 220 / 400 V Charging time at 220 V - 9 hours Max. operating time - 8 hours (depending on application) Tyres: AS 504 10.0/75-15.3 18 PR Standard equipment: Gravity lowering of telescopic boom 2 hydraulic connections at boom head Lighting for road use LED work lights on cab (2 front, 2 rear) Automatic battery disconnect switch Acoustic reverse travel alarm Support for lifting cylinder safety Inspection certificate for 20 km/h operating approval External wallbox charger 16 A - 400 V Optional equipment: Upper door section in glass (for enclosed cabin) Cab heater Heated front windscreen 31x15.5-15" 12 PR TR315 BKT, AS tread (vehicle width increases to 1.70 m) Location: Rhöner Landtechnik G

Condition: used, Year of construction: 2009, functionality: fully functional, Equipment: type plate available, Roller Conveyor / 90-Degree Roller Conveyor Curve Manufacturer: Costo Year of manufacture: 2009 Condition: Used Model: 90-degree curve Total outside width: approx. 2250 mm Total inside width: approx. 1140 mm Overall width: approx. 800 mm Conveying width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Available stock: 2 units Price per unit Condition: Fully functional, with signs of wear Feet must be ordered separately Material: Steel Ideal for fast material handling Professionally dismantled and packed Internal item number: 2026031202 The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be happy to provide you with a tailored offer or advise you on layout and assembly. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully completed projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your workflow and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or additional components such as order picking racks or containers. Kjdeyt I R Nepfx Am Eolr

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Klsdew U U Udepfx Am Esr Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Kedpfx Amskqz H Do Ejlr

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor Kjdpfopa Nxdex Am Eslr - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), color: other, Year of construction: 2026, Equipment: ABS, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-90 Technical Specifications Mouth Size: 900 x 650 mm Kodpfxjxqf Swo Am Eolr Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, We are offering here a belt sanding machine from delNegro Elektromaschinen und Apparatebau. This is an AS 90 model with a 100 mm sanding width. Contact us for a quote. Kjdpfjywarhjx Am Eolr

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Machine nr: 104/1656 Kodohqhcispfx Am Eelr

Condition: good (used), Pad printing machine TampoPrint rapid 2000/90 Manufacturer: TampoPrint AG Ksdpfx Aeytp Trem Eslr Model: rapid 2000/90 Machine type: Pad printing machine Series: rapid 2000 Country of manufacture: Germany Control: integrated electronic machine control Control panel: digital control panel with display Emergency stop switch: present CE marking: present Location: Freiburg

Condition: refurbished (used), Year of construction: 2017, operating hours: 7,845 h, load capacity: 3,000 kg, lifting height: 4,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,187 mm, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 3,981 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Rigorous technical inspection ? 400+ units available ? Worldwide shipping & customs handling ? Service & spare parts at fair prices ? Personal support – even after purchase Test on site now and get professional advice – we’ll find the right solution for you. Industrial truck specifications: Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG S30 Drive type: Electric Load capacity: 3,000 kg Year of manufacture: 2017 Operating hours: 7,845 Lift height: 4,700 mm Mast type: Triplex Klsdpoyw Aanjfx Am Ejr Full free lift: Yes Overall height: 2,187 mm Fork length: 1,200 mm Unladen weight: 3,981 kg Load centre: 600 mm Tyres: Solid rubber Model designation: EFG S30 Voltage: 80 V Battery weight: 2,012 kg Cabin features: Multipilot control unit Lighting: 2x front work lights Attachment: Side shifter Attachment: Additional hydraulic circuit routed to fork carriage

Condition: refurbished (used), Year of construction: 2017, operating hours: 2,581 h, load capacity: 2,000 kg, lifting height: 4,640 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,112 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,527 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are fully reconditioned according to FEM-4.004 guidelines and the latest safety standards, ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ? Made in Germany – with responsibility and precision ? Comprehensive technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test and get advice on-site now – we’ll find the right solution for you. Industrial Truck Specifications: • Manufacturer: Jungheinrich • Type: EFG 220 Counterbalance Forklift • Drive type: Electric • Load capacity: 2,000 kg • Year of manufacture: 2017 • Operating hours: 2,581 • Lift height: 4,640 mm • Mast type: Triplex • Free lift: Yes • Closed height: 2,112 mm • Fork length: 1,200 mm • Unladen weight: 2,527 kg • Load centre: 500 mm • Tyres: Solid rubber • Model: EFG 220 • Battery type: PzS • Voltage: 48 V • Battery weight: 1,094 kg Klsdpfx Aoywz U Dem Eor • Cabin type: Overhead guard with roof window • Cabin equipment: Solopilot control unit • Lighting: 2x front work lights • Lighting: 2x rear work lights • Attachment: Sideshift • Attachment: Additional hydraulic circuit - routed to the fork carriage

Condition: refurbished (used), Year of construction: 2020, operating hours: 673 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 690 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USERS. Our forklifts are overhauled in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics – every unit is thoroughly inspected and reconditioned. - Made in Germany – with responsibility and precision - Strict technical inspection - 400+ vehicles available - Worldwide shipping & customs clearance - Service & spare parts at fair prices - Personal support – even after purchase Test on site and get individual advice – we’ll find the right solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: Low-lift Pallet Truck ERE 120 - Drive: Electric - Load capacity: 2,000 kg - Year of manufacture: 2020 - Operating hours: 673 - Lift height: 122 mm - Mast type: None - Initial lift: Yes - Overall height: 1,400 mm - Fork length: 1,150 mm - Unladen weight: 690 kg Kjdpfjywz Sijx Am Eelr - Load centre: 600 mm - Tyres: Polyurethane - Model type: ERE 120 - Battery type: PzS - Voltage: 24 V - Battery weight: 212 kg

Condition: refurbished (used), Year of construction: 2019, operating hours: 4,734 h, load capacity: 3,000 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,287 mm, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 3,821 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✅ Made in Germany—with responsibility and precision ✅ Strict technical inspection Ksdpfoywz Rxex Am Eolr ✅ 400+ units available ✅ Worldwide shipping & customs clearance ✅ Service & spare parts at fair prices ✅ Personal support—even after purchase Test on site now and receive professional consultation—we’ll find the right solution for you. Industrial truck data: - Manufacturer: Jungheinrich - Model: Counterbalance Forklift EFG S30s - Drive type: Electric - Load capacity: 3,000 kg - Year of manufacture: 2019 - Operating hours: 4,734 - Lifting height: 5,000 mm - Mast type: Triplex - Free lift: Yes - Overall height: 2,287 mm - Fork length: 1,200 mm - Unladen weight: 3,821 kg - Load center: 600 mm - Tyres: Solid rubber - Model series: EFG S30s - Battery type: PzS - Voltage: 80 V - Battery weight: 2,012 kg Cabin equipment: Solopilot control unit Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Rotating beacon Attachment: Sideshift Attachment: Additional hydraulic circuit—routed to the fork carriage

Condition: refurbished (used), Year of construction: 2017, operating hours: 5,243 h, load capacity: 1,400 kg, lifting height: 7,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,541 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, drive unit, brakes, steering, and electrics – every vehicle undergoes thorough inspection and refurbishment. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide transport & customs clearance ? Service & spare parts at fair prices ? Personal support – even after the purchase Test onsite now and get expert consultation – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Reach Truck ETV 214 Drive type: Electric Load capacity: 1,400 kg Year of manufacture: 2017 Operating hours: 5,243 Lift height: 7,700 mm Mast type: Triplex Full free lift: Yes Closed height: 3,100 mm Fork length: 1,200 mm Unladen weight: 2,541 kg Load center: 600 mm Kledpfx Asywz N Uem Ejr Tyre type: Polyurethane Model type: ETV 214 Battery type: PzS Voltage: 48 V Battery weight: 1,175 kg Cab features: Solopilot control element Attachment: Sideshift