Used Telemecanique Lc1D096 Lr3D 146 for sale (306)

Condition: used, Three-phase motor, electric motor -Power: 10 kW -Speed: 1465 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: EX -Number: 6x motors available -Price: per piece -Dimensions: 640/360/H430 mm Hedpfx Aochi Uhedzjn -Weight: 112 kg

Condition: good (used), electric motor, three-phase motor Hsdpfx Ajgxqtuodzen -Manufacturer: MEZ, electric motor from milling machine TOS FB25-V -Type: AP 132S/4 -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP44 -Dimensions: 490/350/H300 mm -Weight: 73 kg

Condition: used, Electric motor, three-phase motor with 2 speeds -Power: 1.6/2.2/6.6 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 54 -pole changing -Dimensions: 595/385/H310 mm -Weight: 105 kg Hodpfx Adjd I Amcezon

Condition: used, AC motor with 2 speeds, electric motor -Power: 3.3/13 kW -Speed: 725/1465 rpm -Shaft: Ø 42 mm -Design: B3 Hjdpfoc I Iwyex Adzon -Protection class: IP 44 -pole switchable -Dimensions: 640/410/H330 mm -Weight: 135 kg

Condition: used, Three-phase motor, electric motor Hodpfx Asc Np Avjdzon -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Siemens Hedpfx Adoc Svnpezon -Type: 1LA5166-1BJ40-Z IEC160L -Power: 2.1/3.1/9 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 mm -Construction: B3B5 -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 640/355/H360 mm -Weight: 97 kg

Condition: used, Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1460 rpm -Shaft: Ø 38 mm -Construction: B3 Hedpfx Adsct Aa Nszjn -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 430/315/H240 mm -Weight: 44 kg

Condition: used, AC motor with 2 speeds, electric motor Hsdpfec I Iwzsx Adzsn -Power: 2.7/10 kW -Speed: 725/1460 rpm -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 580/420/H310 mm -Weight: 112 kg

Condition: used, Three-phase motor, electric motor -Power: 11 kW Hedpofitfijfx Adzon -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP55 -Dimensions: 600/315/H365 mm -Weight: 103 kg

Condition: used, Three-phase motor, electric motor -Power: 3.8/13 kW Hedeckbfxopfx Adzen -Speed: 980/1445 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 2x available -Weight: 97 kg

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 Hsdpfx Aocny Evjdzsn -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Condition: used, Three-phase motor with 2 speeds, electric motor -Motor: is unused -Power: 12.5/18.5 kW -Speed: 970/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -pole changing Hsdpocun N Ujfx Adzen -Dimensions: 740/390/H450 mm -Weight: 148 kg

Condition: used, Three-phase motor, electric motor Hjdpfx Adofkzbiezen -Power: 10 kW -Speed: 1460 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Dimensions: 565/370/H320 mm -Weight: 108 kg

Condition: good (used), Three-phase motor with 2 speeds, electric motor -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Design: B3 -Protection class: IP 54 Hjdpfed E Tx Iox Adzjn -pole-reversible -Dimensions: 710/350/H450 mm -Weight: 179 kg

Condition: good (used), electric motor, three-phase motor -Spare part: of a CNC lathe -Power: 11/15 kW Hsdpob A Hcbofx Adzsn -Speed: 1460/2900 rpm -with electric clutch: 24 V and V-belt pulley -Design: B5 -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0008953 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Hjdpfx Adjv Hp R Tezon

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Hjdpfxoy U Nais Adzon Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, overall weight: 24,000 kg, travel distance X-axis: 800 mm, controller manufacturer: DELEM, controller model: DA-66W, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. - Distance Between Uprights: 3600 mm- Stroke: 400 mm- Installation Height: 600 mm- Throat: 500 mm- Approach Speed: 0 - 200 mm/sek- Return Speed: 0 - 125 mm/sek- Working Speed: 0 - 8.5 mm/sek- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- Power Supply: 400V / 50Hz- Machine hours: 20,700 / 2,000,000 strokes- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Hsdpfoy U Hwrox Adzen Technical Specification Bending Length 4100 mm

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Hedpsy R Npijfx Adzsn Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Hjdpfoxarl Nox Adzon Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E Hodpfxsbpmurs Adzen [...]

Condition: used, Year of construction: 2010, operating hours: 20,096 h, Type of fuel: Electric Colour: Grey Empty weight: 3.057 kg Dimensions (LxBxH): 200 x 115 x 215 cm Lifting capacity: 1.500 kg Lift height: 488 cm Clearance lift height: 146 cm Fork dimensions: 1.200 x 0 mm - Year: 2010 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516210A00352 - Operating hours: 20096 - Lifting capacity: 1500kg - Lifting height: 4880mm - Overhead clearance: 2150mm - Free lift: 1460mm - Fork length: 1200mm - Maximum fork width: 0mm - Minimum fork width: 0mm - Number of wheels: 3 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Free-lift, Work lights, Joystick - Mast: Triplex - Drive: Electric - Brand/Type: Hoppecke - Battery year of construction: 2013 - Capacity: 625Ah - Battery voltage: 48V - Battery test result: 50% Hsdpfx Aexrdc Dedzon - Transport dimensions: 2000mm x 1150mm x 2150mm (l x w x h) - Transport weight [kg]: 3057kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Hjdpsu Axzksfx Adzjn Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: new, Year of construction: 2026, machine/vehicle number: 26000365, fuel type: diesel, motor manufacturer: Rehlko KD39L04T-AA56, General information Field of application: Construction Weights Empty weight: 1.490 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 247 x 111 x 146 cm CE mark: yes Other information Fuel consumption: 18 Liter/Hour at 75% Load Generator: Rehlko KH00751TO4N Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 181 l Production country: FR Additional information Please contact Team DPX for more information = Additional options and accessories = Hodpfx Adeyn U Ecjzjn - Battery - Control Panel - Steel canopy - Tank = Remarks = Approved for HVO use

Condition: new, Year of construction: 2026, machine/vehicle number: 93589750, fuel type: diesel, motor manufacturer: Rehlko KD39L04T, General information Field of application: Construction Weights Empty weight: 1.390 kg Functional Generator capacity: 66 kVA Dimensions of cargo space: 247 x 110 x 146 cm CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Rehlko KH00811T Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 100 l Production country: FR Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. See data sheets for the exact information. Hedpfeyw E E Tex Adzen Kohler and SDMO are rebranded to REHLKO. Approved for HVO use