Used Tkt C-720 for sale (55,247)

Condition: used, Year of construction: 1996, Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps. Additional title: aluminum screw caps Capacity approx.: 20000 bottles/h Length: 1,9 m Ndjdpfx Aeyzh Ixjazsb Width: 1,25 m Height: 2.2 m Features: 8 capping heads

Condition: used, Year of construction: 1993, 5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities. Additional title: 7 pcs. of vertical, coolable stainless steel tanks Volume fermentation- and storage tanks: 10474 l per piece Volume wheat beer tank: 8071 l Volume flotation tank: 12242 l Material: stainless steel 1.4301 Position: standing on feet Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute Nedovcq D Tjpfx Aazsdb

Condition: used, mileage: 108,300 km, power: 220 kW (299.12 HP), first registration: 11/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: * TK box body by Kiesling, year 2020 * Rear portal doors * Cold curtain * Aluminum floor * Two lashing rails each on the right and left * Transverse load securing bar * Thermoking T 600R electric/diesel refrigeration unit * Night power supply socket including cable for refrigeration unit power hookup * BÄR 1.5 t tuck-away tail lift * Leather steering wheel * Turn assist * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Predictive Powertrain Control (PPC) * Navigation system * Automatic climate control * Bi-Xenon headlights * Low engine tunnel storage compartment * Overhead storage above the windscreen with cover * Comfort package * Visibility package * 220 Ah battery Ndodpfxoxafgyj Aazob * CB radio * Interactive multimedia cockpit * 2 air horns on cab roof * Electrical pre-wiring in cab, 24V / 100A * Driving assistance system: Turn assist * 12-speed gearbox, type G 211-12 * Manual (steel) lifting roof * Heated fuel filter * 390 L aluminum fuel tank, left * Reinforced engine brake * Reinforced engine compartment encapsulation * Wheelbase version 5,500 mm * Rear overhang 2,400 mm * Smoker package * Acoustic reversing warning (external sounder) * Tail lift control switch * Additional remote control key * Fleet management system interface * Circuit breaker * Exterior sun visor * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Preparation for 4 surround cameras (display in onboard monitor) * Preparation for auxiliary headlights * Preparation for coolbox/refrigerator * Additional heater (water) * Further equipment: * Emission standard EURO 6 d * Front axle 8.0 t * Actros 5 * Heated front mirror * Trailer brake, 2-line * Connections on the left * Trailer socket 24V / 15-pin * Exhaust outlet centered under vehicle * Batteries arranged side by side, rear axle differential lock * Compressed air connection in cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * Driving assistance system: Lane keeping assist * ClassicSpace, 2.30 m, tunnel 320 mm * LED outline marker lights * Full air suspension front and rear * Electric windows * Tinted windscreen * Urea (AdBlue) tank: 60 L * Central locking with comfort function * Front air intake * Two-stage air compressor * Heated air dryer * Engine 7.7 L – 220 kW inline-6 diesel (OM 936) * Ramp mirror * Disc brakes on front and rear axles * Remote control key * Flashing LED side marker lights * Cab seats: multifunction passenger seat * Front wheel splash guards * 12V socket in passenger footwell * Tachograph / EU control device * Truck Data Center 7 (fleet management system) front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Drop front axle * Gross vehicle weight 18.00 t * Tyres: 315/60R22.5 * and much more. * Subject to errors, changes and prior sale.

Condition: like new (used), Chanber size: Nodpfsd Sm Disx Aazsdb 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Equipped with a four-point mounting flange and sleeve mounting with locating balls. ⸻ Technical data: • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm Ndodjw Rdvispfx Aazeb • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. /////Price per piece/////

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media Nsdpfoyga U Hex Aazodb • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: excellent (used), Year of construction: 1994, Hang Paper Drill 107-20 electronic Nsdpfjt E S R Nex Aazsdb Automatic multi-spindle paper drill with 4 drill heads - Various drill diameters - Depth and side stops - Automatic belt tensioning - Quick adjustment of drill heads EXTRAS: Continuously adjustable spindle drive 100-1600 rpm for processing mixed papers! Very good condition Price plus VAT EXW. All information is subject to change without notice. Subject to prior sale. Dealership. This sale is made without any warranty.

Condition: excellent (used), Year of construction: 2011, CNC Profiling Center Weinig Conturex 2 for milling, drilling, and sawing in cross and longitudinal machining Type C 124 Year of manufacture: 2011 Very good condition Oertli tool set Working width: 40–260 mm Working height: 25–150 mm PowerGrip clamping table, table support length: 2 x 2280 mm Workpiece length without repositioning cycle: 220–2700 mm Workpiece length with repositioning cycle: 2700–4500 mm Workpiece length with multiple repositioning cycles: 4500–6000 mm Ndjdeypb Adopfx Aazeb

Year of construction: 2006, condition: excellent (used), functionality: fully functional, For sale: C-pack VAC 983, automatic machine for packing in mesh sleeve. German-made machine. Suitable for automated production lines. Njdpfoy R Rwbjx Aazjdb Fully automatic packing machine for net packaging of fruits and vegetables.

Condition: excellent (used), We offer used R-KLT and C-KLT crates in larger quantities. Available models: KLT 3215 KLT 4329 KLT 6280 KLT 4328 C-KLT 6428 Nodpfx Asxziv Usazedb Prices start from: €2.50 per unit for type 3215. This price applies only to full truckload orders. We do not ship individual items or small quantities. The crates are free from grease/oil contamination and are undamaged.

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Ndsdevlxbxjpfx Aazeb

Condition: refurbished (used), Year of construction: 2011, The machine, after undergoing a complete overhaul and with a warranty, comes complete with the ZCH 4 cooling unit. Nodpfx Asy U D Uzjazedb

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 12/150 TR TECHNICAL DATA: Model: KRANZLE THERM CA 12/150 TR Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Ndodpfx Aaoy Shflszjb Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 720 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 3.8 / 3.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 12/150 TR EQUIPMENT KRANZLE pressure gun (M22 / quick connector) Spray lance: KRANZLE (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 15m professional-class pressure hose WHY CHOOSE THE KRANZLE THERM CA 12/150 TR? The THERM CA 12/150 TR is an ideal device for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also used by private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the CA 12/150 TR a unit suitable for use in a wide range of industries. Additional handles allow the unit to be transported with additional equipment. A brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, 15m high-pressure hose, reel, and 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster attachment changes than traditional threaded systems. KRANZLE THERM CA 12/150 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Nedpsy Iv Iaofx Aazedb Water drainage Automatic water level control Integrated scale protection Timer for preheating water

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Ndjdpfxey Tylgj Aazeb Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Njdpfxoz Apc Re Aazsdb Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² Ndodpfsz Ahw Hex Aazjb EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: used, Year of construction: 2003, 2003 DEA (Hexagon) GLOBAL IMAGE C/I 091508 Co-Ordinate Measuring Machine (CMM) Njdpez Dgygefx Aazsdb Granite Table Dimension 1,500 x 900 x 250mm. Axis Travel 'X'=900mm, 'Y'=1,500mm, 'Z'=800mm. Volumetric Length Measurement Accuracy 2.2 + 3L/1000µm. Repeatability 2.2µm. Probe Head Renishaw PHC10-2 With SP600M/TP200. Controller B3C-LC\2003. Renishaw ACR1 8 Position Probe Rack. Renishaw 4 Position Probe Rack. Joystick Control. Last Calibration Dec 11th 2025. S/No. GLOC000145 (2003). Baker Asset No. S-2004000005. Please Note: This machine is available to collect from 13th October 2026. The new CMM machines will be installed in the same location as the existing machines. Once a new machine is installed, the existing CMM will be switched off, removed from the production line and transferred to the warehouse, with no possibility of it being recommissioned or switched on again. Baker Hughes personnel will remove the existing machine and place it in a configuration suitable for safe transportation and temporary storage within the warehouse. Baker Hughes will not undertake any packaging of the CMM but will ensure that it is positioned and accessible so that it can be loaded onto a truck by the buyer. The buyer will not be required to remove the CMM from its current operational location but will be responsible for all packaging and loading arrangements.

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 550 x 440 x 580mm, B axis -125/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum diameter 350mm, maximum workpiece height 300mm, maximum workpiece weight 60Kgs number of pallets 2, Ndodpezzzgxsfx Aazjb spindle taper BT40, 60 Station ATC, spindle speed 15,000rpm, Fanuc G-Tech 31iB control, through spindle coolant

Condition: ready for operation (used), Konica Minolta AccurioPress C 4080 with a capacity of 8 million copies. Equipped with: FS 532 RU 518 m PF 707 m IC 609 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. Ndjdpfezadfvjx Aazob We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: excellent (used), C 650I in perfect condition , tested and ready to print ! Total : 127.000 copies ONLY As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information. Nodjgpwukepfx Aazodb

Condition: good (used), lifting height: 16,400 mm, Year of construction: 2018, operating hours: 406 h, Empty weight: 2.800 kg Make of engine: Yanmar Lifting capacity: 3.150 kg CE mark: yes Technical condition: good Visual appearance: good Nsdpfx Aajx Hv Rrozedb Maximum lifting capacity at end of jib: 250 kg Delivery terms: EXW Please contact Vink Machinery for more information Hoeflon C6 * 2018 * 406 working hours * Diesel (Yanmar) and 230-volt drive * Fully equipped * 16.4-meter working height * 14.4-meter horizontal reach * 3150 kg lifting capacity * 2800 kg net weight * Remote control * Articulated outriggers * Documents included

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Nsdsz D Dnbjpfx Aazodb Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: good (used), mileage: 163,377 km, power: 170 kW (231.14 HP), first registration: 03/2023, fuel type: diesel, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 4,820 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 9,550 mm, total width: 2,600 mm, total height: 3,810 mm, loading space length: 7,250 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Year of construction: 2023, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric - Blind spot sensor Number of axles: 2, Configuration: 4x2, Tare weight: 8660 kg, Gross vehicle weight: 11990 kg, Total tank capacity: 180 liters, Chassis height: 8 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 381 tons, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Electric windows, Electric mirrors, Radio/cassette, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 170 kW (228 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 6, Power steering, ABS, ASR, Body construction year: 2023, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Manufacturer of refrigeration unit: Thermoking, Model of refrigeration unit: T-600R whisper, Refrigeration unit: Diesel/electric, Unit hours / electric: 284, Unit hours / Diesel: 4901, ATP condition: 12-2028, Heater, Wall thickness: 45 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Tail lift, Tail lift design: under-running tail lift, Load capacity of tail lift: 1500 kg, Tail lift manufacturer: B.A.R. Cargolift, Tail lift material: Aluminum, Tail lift size: 150 x, AIRCO // BOX IS WRAPED // THERMO KING T600R50 SILENT // KIESLING ATP FRC Transmission Transmission: MB, 6 gears, Automatic Axle Configuration Tire size: 245/70R17,5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Twin tires; Tire tread depth left inner: 10 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 9 mm; Tire tread depth right outer: 13 mm; Suspension: Air suspension Weights Ndjdpfx Aasz D Ampozsb Unladen weight: 8.660 kg Payload: 3.330 kg GVW: 11.990 kg Functional Tail lift: B.A.R. Cargolift, under-running flap, 1500 kg Height of loading platform: 122 cm Refrigeration unit: Diesel and electric (4901 operating hours Diesel; 284 electric) Wall thickness: 45 mm Maintenance APK (Technical Inspection): valid until 10.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 3 Financial Information Leasing price: €1,175 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands and models from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • ...

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Ndsdpfx Asz Et Uyjazsb Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.