Used Bitherma Manometer for sale (221)

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Dkjdpfxez Eq Eps Al Ssu Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Year of construction: 2023, condition: used, functionality: fully functional, AERZEN Delta Blower with Invertek Drives Optidrive ECO unit Year of manufacture: 2023 Details Brand: AERZEN Roots blower type: GM15L 15 kW Dimensions: approx. 125x135x151 cm Model designation: Delta Blower Quantity: 1 Design: enclosed unit with ventilation grille and manometer Color: blue/grey Operating manual included Invertek unit Brand: Invertek Drives Dkjdpfx Aljz Iq Dqs Ssu Product name: Optidrive ECO Rating: IP66 / NEMA 4X Condition Condition: used

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Dsdpfx Ajz I Ig Nsl Ssku Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 900 mm, workpiece width (max.): 350 mm, overall weight: 500 kg, spindle speed (max.): 17,150 rpm, spindle motor power: 1,500 W, input voltage: 230 V, Very nice, compact milling machine for model and prototype construction, as well as small parts. Exceptionally well-maintained machine from model construction. ISEL EuroMod MP30 model Machine, manufactured in 07-2017 Travel ranges X/Y axes: 610/300 mm Z-axis stroke: 300 mm Table clamping surface: 900 x 350 mm Travel speed X/Y/Z: 15 m/min Machine dimensions: Width: 1205 mm Width with control cabinet: 1488 mm Depth: 845 mm Height (door closed): 2123 mm Height (door open): 2418 mm Control panel: iOP-19 touchscreen with keyboard and mouse Dkodpfsz Nv Dyex Al Sju CAN controller: iMD • Pneumatics: Integrated pneumatic air preparation unit from Festo with pressure regulator, manometer, and filter units. • Internal housing cooling: Cabinet climate/cooling unit mounted on the lower housing door. • Housing type: Fully enclosed aluminum profile housing with transparent sliding doors made of safety glass/polycarbonate and hazard warning signs.

Condition: used, Candles: 12 cartridge height [inch]: 30 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring closure: parrotlip Dksdpfx Alez N Eqis Sju Fittings: draining outlet, manometer, deaeration

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Dkodpfxoz Ng Aye Al Ssu Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages). Dksdpfxjzwdwrs Al Seu

Condition: good (used), Year of construction: 1999, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into meat pieces, with and without bones. The MM-26 series is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops) due to its more compact dimensions. The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, unlike modern touchscreen controls, are hardly susceptible to costly electronic damage. Technical data: Djdpfjz Dtg Hex Al Seku Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Trade name: MM-26 / Meat Master 26 Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (high voltage) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection/needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: P-000003, Zum Verkauf steht ein professionelles industrielles Hochdrucksystem ECOROLL HGL3.01, Baujahr 2015, hergestellt von ECOROLL AG Werkzeugtechnik, Celle, Deutschland. Die Anlage verfügt über ein integriertes Hochdruck-Speichersystem, eine Siemens SIMATIC Steuerung, Drucküberwachung, Hochdruckarmaturen sowie ein Bedienpanel. Die Anlage wurde vor dem Verkauf angeschlossen und auf Funktion geprüft. Sie lässt sich ordnungsgemäß starten, die Steuerung funktioniert und das System baut Druck auf. Verkauft wird die komplette, auf den aktuellen Fotos dargestellte Anlage. TECHNISCHE DATEN Hersteller: ECOROLL AG Werkzeugtechnik, Celle, Deutschland Typ: HGL3.01 Baujahr: 2015 Seriennummer: P-000003 Max. zulässiger Druck (PS): 300 / 245 bar Leistung: 5,5 kW Spannung: 400 / 690 V Frequenz: 50 Hz Eigengewicht: 786 kg Zulässiger Temperaturbereich: +5 bis +45 °C Kennzeichnung: CE 0045 HOCHDRUCK-SPEICHERSYSTEM Die Anlage ist mit Hochdruckbehältern der Firma Hochdrucktechnik Leimpek ausgestattet. Technische Daten laut Typenschild: Betriebsdruck PS: 300 bar Prüfdruck PT: 450 bar Dkedpszv Rmdjfx Al Ssu Volumen: 150 Liter CE-Kennzeichnung: 1637 STEUERUNG UND AUSSTATTUNG * Siemens SIMATIC Bedienpanel * drei Manometer zur Drucküberwachung: Speicherdruck, Systemdruck und Primärdruck * Not-Aus * Hauptschalter * Kompressorsteuerung * Steuerung der Hochdruckventile * Hochdruckarmaturen * Rohrleitungen und Verbindungsschläuche * integriertes Druckspeichersystem TECHNISCHER ZUSTAND Die Anlage ist funktionsfähig und wurde vor dem Verkauf getestet. Das System wurde angeschlossen und in Betrieb genommen. Bedienpanel und Steuerung funktionieren ordnungsgemäß. Die Anlage lässt sich problemlos starten und baut Druck auf. Der optische Zustand entspricht den aktuellen Fotos. Normale, dem Alter und industriellen Einsatz entsprechende Gebrauchsspuren. Eine Besichtigung der Anlage ist nach vorheriger Terminvereinbarung möglich. PREIS: 12.900 € netto – Verhandlungsbasis Gewicht: 786 kg. Abholung und Organisation des Transports können mit dem Käufer abgestimmt werden. Bei Interesse können weitere Detailaufnahmen der Anlage und der Typenschilder zur Verfügung gestellt werden. Anlage sofort verfügbar.

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Dksdpfx Asz I Enqel Sju Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t Dkedpexrby Hjfx Al Sju ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) -Work area: 1100x660x700 mm -Integrated dust extraction system -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window Djdpoztrk Ejfx Al Soku -Documentation Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: used, functionality: unexamined, Hydraulic double-column deep-drawing press with a draw cushion. Dodsz A Uncepfx Al Sjku Modified in 2002 by neff Pressen, Karlsruhe, according to VBG 7n5.2. Modification No. 55377, modification date 10/2002. Ram and table with T-slots, table with ejector bores for the draw cushion. Roller conveyor in front of the press area, light curtain on the operator side, pendant control unit with emergency stop for the ram and draw cushion. Hydraulic unit with control panel: pressure setting and manometer for the ram and draw cushion, pressure stage valves; separate control cabinet with operating panel. After-travel distance 12 mm, after-travel time 147 ms, minimum distance of the light curtain to the tool hazard area 294 mm. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading upon agreement. All information without guarantee.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. Dkedpfozuzw Dsx Al Seu HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1992, Vacuum tumbler Germo KT 2000 (2000L) Equipped with a loading system For sale is a ready-to-use industrial vacuum tumbler Germo (Type: KT 2000) with a drum volume of approximately 2000 liters. Ideal for meat processing plants for efficient processing and marinating. Key data & details: Dodjzb Exgjpfx Al Ssku Manufacturer/Type: Germo KT 2000 Capacity: approx. 2000 liters Material: High-quality stainless steel (rustproof) Equipment: Integrated vacuum system with manometer, analog-digital control panel, emergency stop switch, CEE plug Advantages: Rapid brine absorption under vacuum, robust construction, easy cleaning Condition & sale: Inspection: Possible by appointment at the location.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: Dodpfxezcxbwo Al Ssku This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: used, Year of construction: 2022, Übersicht Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Technische Daten Dsdpfxoxhf Sfs Al Soku - Ausschlagwürze: 10 hl pro Sud - Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) - Heizsystem: Dampfbeheizt - Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) - Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) - Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C - Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 hl Wasser) - Zusatz: Kaltwassertank 30 hl (isoliert, Kühlmantel), Malzmühle 300 kg/h, CIP-Armaturen, Tri-Clamp-Fittings, Schläuche, Ventile, Dichtungen, Probenahmeventile - Erweiterung: 10 Magnetventile (je eines pro Gärtank, automatische Einzelkühlung über gemeinsamen Glykolring) - Sudhaus - Durchmesser Maischpfanne/Läuterbottich 1460 mm - Gesamthöhe inkl. Schaltschrank/Steuerung 2860 mm (Das ist der Höhste Punkt der Anlage) - Podesthöhe 1100 mm (Hier lässt sich die Bedienerbühne leicht kürzen wenn nötig) - ZKT's 10 x 20 hl - Durchmesser 1510 mm - Gesamthöhe 3300 mm Lieferumfang - Sudhaus | JingYing | 10 hl, 3-Gefäß-Towersystem | 2022 | Dampfbetrieben, SPS-Steuerung - 10x Gärtanks | JingYing | ZKT 20 hl | 2022 | 2 bar, Kühlmäntel - Whirlpool | JingYing | 10 hl | 2022 | Mit tangentialem Einlass - Kaltwassertank | JingYing | 30 hl | 2022 | Isoliert, mit Kühlmantel - Malzmühle | JingYing | 300 kg/h | 2022 - Dampferzeuger | JingYing | Elektrisch, 72 kW | 2022 - Kälteanlage | JingYing | 6 HP (~12–18 kW) | 2022 | Wasser-Glykol-System −4 bis +10 °C - Podest & Verrohrung | JingYing | — | 2022 | Mit Pumpen, Schaugläsern, Ventilen, CIP-Armaturen - Zubehör | JingYing | — | 2022 | Tri-Clamp-Fittings, Schläuche, Kupplungen, Dichtungen - Magnetventile | JingYing | — | 2022 | 10 Stück, für Einzelkühlung der Gärtanks

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader Djdpfsx Suzaox Al Soku * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, mileage: 10 km, first registration: 12/2024, color: orange, Your specialist dealer with expertise, service, and advice offers you: SCHMAILZL gully cleaner for Multicar, other vehicle manufacturers, and trailers (the attachment is offered without vehicle) Net price: €14,550 plus 19% VAT. (New device with 12-month manufacturer’s warranty) Base unit type SKR II - Painted in RAL 2011, including: - Adjustable frame (1.2–2.0 m wide) with lifting and emptying device - Swivel device with cylinder and chain suspension for manhole covers - Lifting winch (lifting capacity approx. 150 kg) - Hydraulic vibrator – cover lifter - Wind protection – fastening materials - Net weight approx. 300 kg The very simple operation and ergonomic working process make this affordable device, in combination with a tipper vehicle, a genuine alternative to conventional methods. Dkedsvvp Rxepfx Al Seu Additional advantages: - Low fuel consumption as operation is almost at idle speed - Mounting and dismounting take only a few minutes, important for changing assignments - Emptying 150–300 silt boxes per day is possible - Emptying without water addition thanks to hydraulic vibrator - The unit can be installed on various vehicles using the telescopic frame The following requirements must be met by the carrier vehicle: - Hydraulic connection 20–30 L/min, 150 bar - Free return line, size 15 - Lashing eyes on the tipper platform Optional equipment for vehicles or trailers without their own hydraulic drive: Petrol hydraulic unit consisting of: Petrol engine 9 HP/6.7 kW, 20 L/min at 2400 rpm, 8.4 cm³/rev gear pump, manometer, 40-liter tank with oil level indicator and damping mount Dimensions: approx. H 80 x W 65 x D 55 cm, weight: approx. 70 kg Net price: €4,350 plus 19% VAT. Assembly, shipping, or delivery available on request. On request, we are happy to offer complete packages with vehicles, also available in right-hand drive versions. We also gladly provide an offer for the installation or retrofit of your vehicle with the demountable tipper body including a DEKRA main inspection report for the conversion. Errors, changes, and prior sale reserved. Our Terms and Conditions apply. Take advantage of our many years of experience in sales and service and let us prepare an individual offer for you. Make use of our leasing and financing options as well. We promise competent advice and support from our qualified staff. You will find further offers from the commercial vehicle manufacturers MULTICAR, ISUZU, and PIAGGIO as well as an extensive range of attachments at Tel.:

Year of construction: 2014, condition: ready for operation (used), overall weight: 4,000 kg, total width: 1,300 mm, total height: 2,200 mm, product length (max.): 2,540 mm, Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details. - Saw Frame Construction: Heavy steel construction, double-mounted close to the saw band, precisely guided by a hydraulic feed cylinder- Saw Band Table: Low-vibration grey cast iron with a machined surface and T-slots- Control System: NC control with 9-inch colour touchscreen for preselection and control of cutting programs (cutting lengths, piece counts, band speed, and angular position)- Mitre Cuts: Automatic positioning of the saw frame for mitre cuts on both sides between 30° and 90°- Upper Saw Band Guide: Automatically self-adjusts to the required workpiece height- Operating Modes: "HAND" for single cuts and "AUTO" for fully automatic series production cuts- Material Transport: Motorised feed (pliers vice / Zangenspannstock)- Material Clamping: Hydraulic clamping via short-stroke cylinders on both sides of the saw band- Saw Band Drive: Infinitely variable control via a frequency-regulated electric motor- Band Tensioning: Regulated mechanically via disc springs and monitored via manometer- Saw Band Length: 4570 mm- Net Weight: Approx. 4000 kg (incl. 3000 mm roller conveyor)- Dimensions (Required Footprint): 1300 mm x 2540 mm (without roller conveyor)- Height: 2200 mm- Additional Equipment: Electrically powered chip brush, generous coolant tank with integrated chip collection container, 3000 mm roller conveyor Dkedezzavxepfx Al Sou

Condition: used, maximum load weight: 37,885 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, Equipment: ABS, Excerpt from Equipment List Loading Platform * in extendable design with a rear slope of approximately 1,000 mm x 8° Hardwood Decking * approximately 48 mm thick, with ribbed metal sheeting over the axles JOST King Pin * (mechanical) with 2-speed gearbox for an approximate lifting capacity of 24 tons (approximate test load of 50 tons) BPW Axles and Suspension * 2 fixed axles * 1 trailing axle * Technical axle load: 12,000 kg each Dsdpfx Aozv A Aqel Ssku Air Suspension * with lifting and lowering valve Braking System * in accordance with EU regulations with EBS-E (2S2M) Accessories * 2-inch king pin * One galvanized steel front panel, approximately 400 mm high * Load manometer for determining axle loads, including load diagram * Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * One galvanized toolbox integrated into the sloping gooseneck (± 47 kg) * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or 40' container. (± 30 kg) * 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm, in the outer frame of the loading platform. (± 18 kg) * Galvanized extensions, extendable by approximately 230 mm on each side (± 230 kg) * Lift axle on the front axle * Adjustable mounting rails for aluminum ramps at the rear of the vehicle * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear (± 16 kg) * Four warning panels, extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light. (± 25 kg) * A mounting bracket for a rotating beacon on the warning panels * One rotating beacon supplied separately * HRM Metallization (High Resistance Metallization) Painting * Top coat, single color in RAL 3002 carmine red.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Dksdpfx Ajy A Tpqel Seu Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges Dksdpsylnwyjfx Al Sju • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Dksdpfxsy N Duqj Al Ssu Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Worldwide delivery / Dealer inquiries welcome! Dkjdpfx Alozit Uqj Sou Internal number: #646 The images are example images. Actual equipment and color may vary. STS V-1.5 Vacuum Tank Trailer Tank * Tank capacity 1,500 liters * Tank hot-dip galvanized * Tank slightly tilted backwards for easier cleaning * Side flushing opening in the tank to remove contaminants or blockages without opening the tank lid * Tank lid can be opened completely to the passenger side and secured with hook screws * 2 safety levels installed as standard to prevent damage to the compressor * Syphon separator * Overflow with 2 balls and sight glass * Manometer on vacuum line with protective bracket * Mechanical level indicator with color scale Engine and Compressor * Vacuum compressor MEC 3000 with 3,500 liters of air capacity * Vacuum max. -0.8 bar (continuous operation at -0.5 bar) * Overpressure max. 0.49 bar * Maintenance-free V-belt drive for vacuum compressor * Industrial engine (gasoline) * Electric starter, oil sensor, control panel with ignition switch, battery and tank * Internal intake hose to avoid protection within the engine unit * Muffler for vacuum compressor with oil collection * Heat-conducting sheet made of stainless steel above the exhaust * 1 liter of biodegradable compressor oil stored in an oil bottle holder * 5 liter gasoline canister in holder * Standard funnel with long neck for changing and refilling engine oil * All engine-related components and accessories are housed in a lockable engine box * Engine box made of aluminum and powder-coated in the desired color Chassis * Self-supporting chassis, completely hot-dip galvanized * Low-loader tandem chassis 2.7t * Track width identical to passenger cars and Sprinters for optimal driving * Lowest possible center of gravity of the suction tank * 2 axles with 1,350 kg load capacity each and independent wheel suspension from a well-known manufacturer * Continuous welded V-drawbar * Sturdy fenders with metal lamp housing * Lashing brackets for quick securing of the suction hoses using rubber bands * Storage option for tools and accessories Suction Tank * Overrun brake with return mechanism * Automatically locking ball coupling * Support wheel reinforced * 13-pin cable connection Connections and Hoses * 2x Suction hoses (3") 5m long with Perrot couplings * 1x Suction lance 3" (1500mm long) * 1x Perrot connection (3") in the tank lid at the bottom * 1x Perrot connection (3") on the side, on the right in the direction of travel For more detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.