Used Blocker for sale (29)

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Codjvbcl Hspfx Ab Djhb

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange Codpfx Abjwyiw Es Djhb - Note: the images are archive photos; the vehicle may still be in use.

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Csdpsu D E A Dofx Ab Dohb Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: blue, - Archive photos – the vehicle shown may differ and may already be in use. # Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Outer frame slightly angled, with "Load-Lock-Profil" for lashing strap attachment. Note: to hook straps in together with side boards, the boards must be opened. - 24 t 2-speed landing legs, single-side operation, straight foot, without shift compensation - Pull-out ladder at the rear - Side door retainer Cjdpfey Dfprex Ab Dshb - 2x wheel chocks with holder - Attention! Chassis No. 2024286–89 only: pallet box for 30 Euro-pallets (ground clearance approx. 220 mm) - Galvanised steel underrun protection - Quarter-shell mudguards, front and rear of axle assembly - Anti-spray mudflaps to EC regulations - Rear impact protection - Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with one padlock (lock not included) # Axles & Suspension - SAF axles - Laser-aligned axles/running gear, reducing tyre wear and fuel consumption - Air suspension - 1st axle: automatic lifting axle, incl. forced lowering and start-up aid, activated by pressing the brake pedal 3 times (start-up aid functions up to an axle load overrun of 30% and up to a maximum speed of 25 km/h) # Braking System - 2-line air braking system, colour-coded pipework for easy servicing - Spring-actuated parking brake - 2 anti-mismatch coupling heads at the front, without connecting hose - EBS electronic braking system with EBS socket at the front, without connecting cable - Attention: this trailer may only be towed by tractor units that ensure the effectiveness of the ABS! - With lift-and-lower valve - Vehicle stability system # Wheels & Tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, factory silver # Electrics - 24V multi-chamber lamps, yellow LED marker lights on the sides - 2 white front position lamps - 2 white/red rear outline marker lamps - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable # Front Wall / Front Corner Posts - 580 mm high steel corner posts in lightweight (volume) design, release mechanism for side curtain at front wall - "Crash-Blocker" – steel impact protection on lower inside, approx. 140 mm high # Centre Posts - 3 pairs of sliding posts, adjustable along entire length, with 4 insertion pockets each and a long pocket at the bottom - 3 pairs of post positions # Rear Wall / Rear Corner Posts - Rear corner posts, steel, up to roof lower edge, curtain attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks # Curtain (Tarpaulin) - Curtain with welded-in horizontal and vertical straps - Tensioning buckles in stainless steel # Roof - Sliding roof, rear end bow foldable, roof slidable from rear to front, curtain colour: white - Optimised rain gutter at the rear, on top of the end bow, above the doors # Operating Notes - When forming a combination, the legally permitted overall vehicle height must be observed! Should the overall height exceed 4,000 mm, please note the following: the haulier is liable for any resulting damage; the person delivering the vehicle must obtain their own permit under § 29 StVO; we accept no liability for the delivery of the vehicle.

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height max 330 mm min 80 mm Chedpfxjc Idi Ro Ab Dsb Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm Chodpozlcdgofx Ab Djb (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Chsdpfxezlciij Ab Dob Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit • Sitma 930-A Stacker Chjdpstryhfefx Ab Dob • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Mounting position for warning boards at the rear - Outer frame with "Load-Lock-Profil" for lashing strap attachment - 24 t twin-speed landing legs, single-side operation - Ferry lashing eyes, marked yellow, incl. 2 at the rear as tow eyes Chodpszb Iu Djfx Ab Dob - Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers - Stake pockets recessed in the outer frame, 80 x 80 mm internal size - Stake pockets recessed centrally in the floor, 80 x 80 mm internal size - Removable stakes W=80/D=80/L=1200 mm, hot-dip galvanised - Lashing rings recessed in the outer frame, 5 t each - 2 tool boxes, W approx. 1230 / H approx. 450 mm, enclosed, fitted across the full width ahead of the axles in place of side underrun protection, foremost lock insertable as pin type - Cross lashing/stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, with 20 mm round steel bars top and bottom, spacing approx. 60 mm, closed at the bottom with an angle plate, open downward on one half, for lashing and inserting 80 x 80 mm stakes - Open compartment for warning boards, subject to technical feasibility #Axles + Suspension - SAF disc-brake axles, laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption - Air suspension - 1st axle automatic lift axle, incl. forced lowering and start-off aid, activated by braking 3 times - 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm #Braking System - Two-line air braking system - Colour-coded pipework for easy servicing - Spring-brake parking brake - 2 anti-mismatch coupling heads at the front - EBS electronic braking system with EBS socket at the front - Lift-and-lower valve - Vehicle stability system #Wheels and Tyres - 385/65 R 22.5", steel wheels, factory silver #Electrics - 24 volt - 4 x three-chamber lights, side-mounted yellow LED lighting - 2 white LED front position lights - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - Beacon light with bracket, switched via side lights (lamp removable) - 2 pairs of warning boards, double LED-illuminated, extendable to 4500 mm and removable via plug connector, with additional bracket at the rear - Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor - Screen-printed plywood flooring approx. 30 mm thick, cross joints with omega insert, on longitudinal bearers for high point-load capacity, forklift axle load up to 7100 kg max. #Front Wall / Front Corner Posts - 25 mm aluminium hollow profile, 1650 mm high - Corner posts in solid steel design - Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel - "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high - Storage compartment for 80 x 80 mm removable stakes inside the front wall

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Chodpfjzxz R Sox Ab Djb Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Cjdpfx Ajx Rq Slob Dehb Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Cedskyrlwjpfx Ab Djhb Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Chjdpozun I Ajfx Ab Dsb Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades Chjdozxq Dnopfx Ab Dsb 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, Year of construction: 2026, #Plateau semi-trailer Mega - Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification #Chassis – general haulage semi-trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Reinforced frame for high payload, also suitable for vehicle transport - Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment - 10 pairs of lashing points recessed top/outside in outer frame, 10 t each - Foldable rear support legs - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel underrun protection - Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle - 1 spare wheel holder for 1 spare wheel, with wheel fixing set - 2 lockable plastic toolboxes, W=600/H=425/D=460 mm - Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock - 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal - 10 stake pockets recessed centrally in floor, 70x40 mm internal - 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes #Arrangement - Stake pocket positions 2 and 4 per Fliegl data sheet - 20 plug-in stakes, hot-dip galvanised - Storage space for aluminium loading ramps, ramps slide in from the rear - 3 pairs of folding lashing eyes, 10 t, in outer frame #Axles & suspension - SAF disc-brake axles, air suspension - Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times #Braking system - 2-line air braking system, colour-coded lines for easy servicing - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, no connecting line - EBS with front EBS socket, no connecting cable - Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height) - Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm Chjdpfxezwn Izj Ab Deb - Trailer stability system #Wheels & tyres - 435/50 R19.5 steel wheels #Electrics - 24 V, multi-chamber lights - Yellow LED side marker lights - 2 white LED front position lights - 2 white/red outline marker lights at rear - 2x 7-pin and 1x 15-pin anti-mismatch sockets at front - LED work lights at sides, 1x left and 1x right (direction of travel) - 2 additional LED work lights at rear - 1 beacon with holder, switched via side lights - 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm - Additional 7-pin socket in underrun protection #Floor - Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 25 mm aluminium hollow profile, 1,350 mm high - Solid steel corner posts (closed, heavy-duty version) - Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker") - Steel impact protection at approx. 140 mm height on lower interior - Internal storage compartment for plug-in stakes

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled). Chedpfxszmub Hs Ab Dob

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902034305, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Archive photos shown. Vehicle may still be in operation. Fliegl Rail-Transport Curtainsider Semi-Trailer (Huckepack) High-strength fine-grain steel welded chassis with replaceable 2" kingpin. Rail-compatible Huckepack design for combined road/rail transport. EN 13044 railway coding with ILU code. XL rail load securing package for transport speeds up to 140 km/h, including 4 colour-marked crane grab areas, integrated grab protection in the curtain, roof markings for crane positioning, max. overall height 4,000 mm with air suspension lowered for pocket wagons. Foldable side and rear underrun protection, aluminium side guards, rear ladder, D-Lock door retainers, Heavy Blocker 2.0 rear impact protection, yellow ferry lashing rings and pallet stops on both sides. Axles & Suspension: SAF 430 mm disc brake axles for combined transport with anti-drop cable protection, air suspension, automatic lift axle with forced lowering and traction aid (activated by braking three times). Braking System: Dual-line air brake system with colour-coded air lines, spring parking brake, EBS with front socket, raise/lower valve with auto-reset function. Tyres: 385/65 R22.5 tyres (manufacturer's choice), steel wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets, rear LED work light. Floor: Approx. 30 mm plywood floor on 8 longitudinal cross-members, forklift axle load up to 7,900 kg, premium sealed floor. Cjdpfx Abezlrqcj Dshb Front Wall: 2,580 mm steel bulkhead with EN 12642 XL strength (0.8 × payload), Crash-Blocker and internal steel impact protection. Rear: Steel rear corner posts, EN 12642 XL rear portal (0.5 × payload), Fliegl I-Lock integrated door locking system (iF Design Award), lifetime warranty on frame-mounted locking components. Curtain: Reinforced curtain with welded horizontal and vertical straps, side curtain strength 0.4 × payload. Roof: Fliegl Blitz sliding roof with rear end lift, automotive L-roof beams, five-point roof fastening, additional roof safety hooks, non-elastic roof with minimal deflection, integrated rear rain gutter. Approval: Germany, EC type approval (2007/46), Fliegl EN 12642 XL, DL 9.5 and VDI 2700 Sheet 12 load securing certificates.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor Csdpfx Abszmtc As Dohb 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. # Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation, with load compensation Extendable rear ladder, side door retainers 2 wheel chocks with holders Aluminium side underrun protection, galvanized steel underrun protection Quarter mudguards with EC-compliant anti-spray mud flaps Rear impact protection 2 spare wheel holders + 1 spare wheel (same make as standard tyres) Lockable plastic toolbox Storage box for fire extinguisher up to 6 kg # Axles + Suspension BPW disc brake axles with 430 mm discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) # Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake EBS electronic braking system with EBS socket at front Raise/lower valve and vehicle stability system # Wheels and tyres 385/65 R22.5" steel rims, factory silver finish # Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin sockets at front # Floor Csdpfx Abjzmtmus Dshb Approx. 30 mm phenolic plywood floor panels on 8 longitudinal supports High point load capacity for forklift axle loads up to max. 7,900 kg Rear steel chequer plate flooring approx. 300 mm length # Front wall / Posts Height 2,580 mm Steel corner posts in high-volume design "Crash Blocker" steel impact protection inside lower front area # Centre posts 3 pairs of sliding posts, movable over full length 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats # Rear wall Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with internal rotary bar locks # Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles # Roof Sliding roof system with rear end lift-up function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading/unloading Optimized rear rain gutter Complete body supplied loose as a kit (unassembled).

Year of construction: 2005, condition: excellent (used), functionality: fully functional, empty load weight: 63 kg, maximum load weight: 300 kg, machine/vehicle number: 2441, Mobile tank, entirely made of stainless steel, Eurocont brand, year of manufacture 2005, impeccable technical and optical condition, gaskets in excellent condition, Series: 2441, weight 63 kg, operating pressure allowed: 1 bar; tested pressure 1.7 bar; negative operating pressure allowed: -0.15 bar, maximum operating temperature allowed + 130°C, this tank can work under pressure if a manometer is installed. Mobile stainless steel tank for various food and non-food liquids. volume 300 liters, diameter 800 mm, height 1,140 mm. The tank is on four rollers with blockers. It has 3 upper loading sockets: 100 DN with valve, 50DN and 20DN socket and lower DN 100 discharge/empty socket with closing lever and threaded cap. Sales price: 2.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Cjdpfjtctmxjx Ab Dohb Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side Chedpfx Aoi Riwueb Djb 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 r19.5, tire condition: 100 %, Additional information: Fine-grain steel welded construction, + Preload with light pretension in the neck area, turntable + with interchangeable 2 kingpins, outer frame slightly inclined, new design with Load-Lock profile for securing lashing straps, 24 tons, 2-speed support winch, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door latch on the side, 2 support wedges with holder, side impact protection made of aluminum, under-run protection made of galvanized steel, quarter fender in front of the 1st axle and behind each axle, with anti-splash flaps according to EC, rear impact protection. SAF disc brake axles, axle/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. Codpei Ri E Hefx Ab Dehb 2-line compressed air brake system, color-coded lines for easy servicing, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle stability system. 435/50R19.5, manufacturer's choice, steel rims, factory silver. 24 volts, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front, 2 white/red side marker lights at the rear, 2 x 7-pole non-interchangeable sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle loads up to max. 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a volumetric design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at a height of approx. 140 mm with steel impact protection. Center posts: 3 pairs of sliding posts that can be moved along the entire length, with 4-fold pockets and a long pocket at the bottom, 3 pairs of post positions. Sliding slats: 5 rows of wooden slats. Rear wall/corner posts at the rear: Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel locking mechanisms each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof rail for the automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal deflection of the roof rail during loading and unloading, optimal rain deflector at the rear, at the top of the end rail, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm with gas spring support, 3 driving positions at the front: internal height at the front approx. 2900mm/2950 mm/3000 mm, set to approx. 3000 mm. Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the side tarpaulin and at the top in the corn

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time Codpoh Nrh Uofx Ab Dohb ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Cjdov Nlduopfx Ab Dshb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-60 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa. Chedpev Nldzsfx Ab Deb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.