Used Carbon Zapp Gasoline Injector Test Bench for sale (13,163)

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Bledpfx Amexiyxvs Tsk

Condition: like new (used), Carbon Zapp GDU.2R (45F) – 2021 – Excellent Condition For sale: a professional Carbon Zapp GDU.2R (45F) diagnostic unit designed for testing and diagnosing gasoline direct injection (GDI) injectors. Blodpfjzkkk Eex Am Tjk The unit is from 2021 and is in virtually factory-new condition – it has only been used for 1.8 hours, making it almost like new. Technical specifications: * Manufacturer: Carbon Zapp * Model: GDU.2R (45F) * Year of manufacture: 2021 * Operating hours: only 1.8 hours * Maximum test pressure: 450 bar * Tests 1 injector at a time * Power supply: 100–240 V AC, 50/60 Hz * Required compressed air: 6.5–10 bar (dry and oil-free) Application: The unit enables professional diagnostics and performance checks of gasoline GDI injectors used in vehicles such as: * Volkswagen / Audi / Škoda / SEAT (TSI, TFSI, FSI) * BMW * Mercedes-Benz * Ford EcoBoost * Opel SIDI * Hyundai / Kia GDI * Mazda Skyactiv-G * Toyota D-4 / D-4S * Honda Earth Dreams * Nissan DIG * Volvo Drive-E and many other manufacturers using injectors from Bosch, Denso, Delphi, Continental/VDO, and Hitachi. Key advantages: * Professional diagnostics of gasoline GDI injectors. * Precise measurement of injector parameters and performance. * Automatic test procedures. * Intuitive software. * High accuracy and repeatability of results. Condition of the unit: The unit is in excellent technical and visual condition. Thanks to only 1.8 hours of operation, it can be considered practically new. An ideal offer for a workshop or company specializing in the diagnostics and refurbishment of gasoline injection systems.

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Blodpfx Amjzp E Dkj Tsk Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment Bledpey Uigcsfx Am Tsk LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: good (used), NOVOTEST Impulse Test Stand / High-Pressure Test Stand Sale from site! Manufacturer: NOVOTEST / BLUM-NOVOTEST GmbH Type: Impulse Test Stand System No.: 00318 Version: High-pressure impulse test stand with hydraulic supply and test cell For sale is a used NOVOTEST impulse test stand suitable for industrial applications, test engineering, hydraulics, research, development, and quality assurance. The system was used for dynamic internal pressure testing of hoses, pipelines, fittings, and containers, and features computer-controlled test sequence management. Technical data: Max. operating pressure: 1,500 bar Test medium: Mineral oil / various testing media possible Frequency: 50 Hz Rated power: 135 kVA Operating voltage: 3 x 500 V PEN Control voltage: 230 V~ / 24 V- Pre-fusing: min. 160 A / max. 200 A Impulse volume at 1,500 bar: max. 140 cm³ Impulse volume at 1,000 bar: max. 210 cm³ Additional pressure stage: max. 340 cm³ Maximum test frequency: 1.7 Hz Test fluid temperature: up to max. 160 °C Temperature control accuracy: ± 3 °C Total weight according to nameplate: approx. 6,000 kg Equipment: - Complete industrial impulse test stand - Enclosed test chamber / test cell - Hydraulic power supply - Specimen supply system - Power section - Test cabinet - Operator cabinet - PC-based control system - Pressure and displacement transducers - Temperature control - Flushing system for test media - Safety monitoring / emergency stop - Technical documentation available Hydraulic power unit: - BOSCH hydraulic power unit - Output: 55 kW - Voltage: 500 V / 50 Hz - Tank volume: approx. 840 l - Max. operating pressure: approx. 280 / 315 bar Suitable for: - Pressure impulse testing - Hydraulic testing - Burst testing - Hose testing - Component testing Condition: Used system with age and usage-related wear. Bledpfjy Rp R Tox Am Tjk Visual condition as per photos. The unit comes from industrial use. Scope of delivery: - NOVOTEST impulse test stand - Test cell / test chamber - Hydraulic power unit - Control and operator cabinet - PC / monitor / operator unit - Drawer cabinet with accessories - Technical documentation / folders - Scope of delivery as depicted Commercial sale – sale without warranty. Subject to changes and errors.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand Bodpfszimcbex Am Tolk - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Bljdpjzimb Dofx Am Tjk Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Blodpfxozh U Rdo Am Tek Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with Bodpjzhkb Sofx Am Tslk (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Perforated plate made of stainless steel (11 cm) Blsdpfezrfl Hex Am Tek Frame: 80x82x155 cm (H x W x L)

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Blodpfezg Ex Nox Am Tek Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Lindner Burst Test Stand We offer a Lindner burst test stand here. AGB Burst Test Stand TMM4 Technical Data: AGB Burst Test Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Blodozd Sivepfx Am Tjk Chamber temperature range: RT ... 180°C Medium temperature range: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuses: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY The following items are required for commissioning the burst test stand: Pump, cooling tower & fire alarm control panel – these are not included. Type: AGB Burst Test Stand TMM4 Weight approx. 705 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), KSE Leakage Testing System Bsdpfx Aszdziljm Tjlk Here we offer a KSE leakage testing system. Testing system for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Bsdpfx Aszgv Rvsm Tjlk Durability testing Characterization testing EU declaration of conformity available

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Bsdpoy T Ulzsfx Am Tolk Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Blodpfx Ameg Sxmfe Tsk Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement Bljdpfx Amjf Axn Ae Tjk - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: not inspected (used), functionality: unexamined, NC-125 diesel injection pump test bench in used condition. This is a classic mechanical test stand designed for testing and calibrating diesel fuel injection pumps and injectors. Bjdpfx Ameyx Sihj Tjlk Unit features a rotating pump mount, multiple high-pressure test lines, analog gauges, and manual control panel. Ideal for diesel repair shops, agricultural equipment service, or restoration projects. Machine shows signs of normal use (oil, wear, aging components) but appears complete. _____ Specifications (typical for this type) • Model: NC-125 • Type: Diesel injection pump test bench • Operation: Mechanical / analog • Applications: Inline injection pumps Rotary/distributor pumps • Includes: High-pressure lines Gauge cluster Pump mounting platform _____ Condition • Used / untested • Cosmetic wear, oil residue • Sold as-is

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Bsdjy R N A Aopfx Am Tslk Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Blsdpsrr Ammofx Am Tok Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Bodpfxoyl S Euj Am Telk

Year of construction: 2017, condition: good (used), evopro test bench for printed AmbientLight modules P585 Manufacturer: evopro systems engineering AG Description: Test bench for printed AmbientLight modules Project no.: P585 Serial number: 0001 Year of manufacture: 2017 Blsdpfoyrnazox Am Tok Power supply: 230 V / 50 Hz / 13 A (L+N+PE) Design: Enclosed test bench for printed AmbientLight modules Structure: Aluminium profile frame with complete test cabin Application: Optical and functional testing of lighting and AmbientLight components Location: Schierling Inspection possible by appointment.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 11182, overall weight: 1,200 kg, Please provide your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. Bsdpfjw E Iw Ijx Am Telk Technical data available in the handout. Sold without packaging; any warranty rights are excluded. If you intend to dismantle the system yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 11192, Please provide us with your offer price. Bljdpfsw E I U Tsx Am Tsk Sale only within Europe (EU), including Turkey; United Kingdom, Switzerland. Technical data according to the handout. Without packaging; any warranty rights are excluded. If you wish to dismantle the system yourself, please indicate this in your bid. We do not assume any liability for the accuracy of the technical data, for the completeness of the accessories and tooling, or for compliance with all safety and environmental protection requirements as specified in the accident prevention regulations.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Bljdpfxjtw S Awo Am Tjk Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.