Used Complete System Smartpad 901Mm 10 Kg for sale (98,972)

Condition: excellent (used), KUKA Industrial Robot Complete System Type: KR 10 R900 sixx / KRC4 For sale is a KUKA industrial robot complete system from a commercial environment, consisting of the robot arm, controller, smartPAD, cable set, and additional accessories as depicted in the photos. This system is suitable for a wide range of automation tasks, especially in industrial production, assembly, laboratories, material handling, pick-and-place operations, inspection tasks, and general robotic applications. The 6-axis robot is designed for precise and rapid motion sequences and can be used for gripping, positioning, feeding, moving, and processing components. System components: - KUKA KR 10 R900 sixx robotic arm - KUKA KRC4 controller - KUKA smartPAD - Connection and interface cables - Additional accessories as shown in the photos Technical data of the robot: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article no.: 10016515 Serial no.: 500877 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Technical data of the controller: Controller: KRC4 Article no.: 11019802 Serial no.: 224374 Controller weight: 33 kg Input voltage: 1 x 230 V Line frequency: 50/60 Hz Full load current: 12 A Line fuse: 16 A System information / Software status as displayed: KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options as displayed: - ExpertTech 3.1.1 - Gripper & SpotTech 3.0.5 - OrangeApps.MqttClient 2.2.12 - Profinet KRC-Nexxt 2.2.7 - RemoteService 1.0.2 - UserTech 3.1.4 Dimensions / Weight: Total system weight including controller and accessories: approx. 90–110 kg Robot dimensions: Reach 901 mm Controller dimensions: compact KRC4 version Condition: Nljdpey D Hd Rjfx Agyec Used, from ongoing commercial operation. Visual condition with typical signs of use. The screen and system information are visible in the photos. For the external condition, please refer to the images. Scope of delivery: The images are decisive for the exact scope of delivery. The table shown in the photos is not included in the sale. Please note: Commercial sale. Subject to changes, errors, and prior sale. All technical information provided to the best of our knowledge, but without guarantee. We are happy to answer further questions by phone.

Condition: excellent (used), Manufacturer: KUKA Model: KR 10 R900 sixx Controller: KRC4 Description For sale is a KUKA industrial robot as a complete system, comprising the robot arm, KRC4 controller, smartPAD, as well as connection cables and accessories. The system is suitable for a wide range of automation tasks in industrial production, such as handling, pick-and-place, assembly, feeding, positioning, or inspection processes. This 6-axis robot enables precise and fast motion sequences and is particularly well-suited for compact workspaces and automated production cells. Technical Data Robot Type: KR 10 R900 sixx Item No.: 10016515 Nlodpfx Agjy Dt D Djyec Serial No.: 500874 Year of manufacture: 07/2013 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: approx. 52 kg Controller: KRC4 Item No.: 11019802 Serial No.: 224377 Year of manufacture: 2013 Controller weight: approx. 33 kg Supply voltage: 1 x 230 V Frequency: 50/60 Hz Full load current: 12 A Fuse protection: 16 A Total system weight (approx.): 90 – 110 kg Software / System KRC SR Version: V8.2.3 HMI Version: 8.2.0.4 B22 KSS: 8.2.21_SR Installed options: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Condition Used Visually, with normal signs of use System data and status as shown in the pictures Scope of Delivery KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and interface cables Accessories as shown in the images Additional Information Inspection possible by appointment Loading / shipping by freight carrier possible Commercial sale

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: Nlsdpfozaw Nuox Agyoc 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems Nedpjwm Nq Ejfx Agyelc • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via Nsdpsndk N Aefx Agyelc the company JUTEC - Service contracts, maintenance at your site

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Nlodpfx Asyzc Ruogysc

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase Nsdpfx Agjyrh I Eoyslc • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. Nlsdpjy Uc Sfefx Agyjc A mix of used and new items.

Year of construction: 1991, condition: good (used), Carton sealer, packaging machine, carton closing machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, Carton Sealer Type T-10 -Carton width: max. 530 mm -Dimensions: see photos -Overall dimensions: 980/930/H1680 mm Nledpolry S Ajfx Agyec -Weight: 135 kg

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Serial number - QH20130065. Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Serial number - GV131595. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Nledoy Um T Hspfx Agyec Some spare parts are also included. Videos available on request.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h Nsdpezdn H Refx Agyolc bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Maintenance, history and condition Nlodpfx Agozg Dbioyec Number of owners: 1 Technical condition: average Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and a CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V895-440 HBT SP Air-Cooled Vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Njdoy Iwp Sjpfx Agyelc Manufacturer: LDS Type: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial design Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Controller IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Sliding table / mounting table available Vibration-isolated installation Program operation possible Sliding table 760 mm x 850 mm Threaded insert spacing 100 mm Enabled licenses: Excitation types Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Random, Sine-on-Random PSD Limit Control, Shock Extensions Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / controller active Inspection under power possible Scope of delivery LDS V895-440 HBT SP Shaker LDS SPA56K Amplifier IMV K2+ System PC system complete CTS climate chamber Accessories as shown in the pictures Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article Number: 590-750 Device Type: Hydrogen Leak Detector Nlsdpfx Aszdggwjgyec Description Professional hydrogen leak detection system consisting of INFICON Sensistor ISH2000, INFICON TGF10 Tracer Gas Filler, and AP57 Search Probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical Data Supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Printer port Probe control port TGF10 Tracer Gas Filler Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Weight: approx. 4.7 kg Equipment Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application Areas Leak testing of pipelines Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing facilities Condition Used Visual condition as shown in the pictures Normal storage and usage marks present Scope of delivery as shown in the picture. Changes and errors in the technical data and prior sale are reserved.

Condition: used, This listing is for Cytiva Cellulose DE52 10kg Diethylaminoethyl Cellulose. This premium ion exchange chromatography resin provides exceptional binding capacity and clean resolution, making it ideal for protein purification and biomolecule separation Nodpezb H E Ijfx Agyslc Unopened with seals in tact

Year of construction: 1994, condition: excellent (used), 1 used steam boiler ----- manufacturer : Jumey heating surface approx. : 40 qm capacity max : 2.000 kg/h max. allow. working pressure : 10 bar so far operated with : 5,0 bar water contents low level approx. : 3.540 l water contents full approx. : 4.750 l year of construction : 1994 equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, Nodpjikvdijfx Agyelc feed water pump and the existing fine and coarse fittings.

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- manufacturer : CERTUSS type : Universal Nodpfx Aei E Hztogyelc capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 1991, condition: excellent (used), 1 used steam boiler ----- manufacturer : LOOS Gunzenhausen Nodpfx Agsi E Hz Tjyolc type : U-HD heating surface approx. : 20 qm capacity max. : 1.000 kg/h working pressure : 10 bar increased test pressure : 18,5 bar water contents low level approx. : 993 l water contents full approx. : 1.365 l year of construction : 1991 equipped with Weishaupt oil burner, switch cabinet, feed water pump, eco AWT 3, 28 ltr,82 kW, 8,5 m², horizontal and the existing small and large fittings.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2012, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.880 kg Nlodpfx Aszdb Tregyjc Carrying capacity: 15.120 kg GVW: 22.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg Make of bodywork: Groenewegen Jumbo Plywood Box Maintenance, history and condition Number of owners: 1 APK (MOT): tested until 12/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 Njdpfjk Abl Esx Agyelc VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Nlodpfx Agjv Da Dlsyjc

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler Nodjyfg Htepfx Agyelc

Condition: used, This listing is for the Millipore Elix Essential 10 UV Water Purification System The unit is in full working condition and is ready for immediate use Nlodpjy Iwzzsfx Agyec Here’s a clear overview of the Milli‑Q Elix Essential 10 UV Water Purification System, a laboratory-grade water purification unit used to produce high-quality pure water Preparing reagents, buffers, and solutions Feeding instruments like autoclaves, washers, and ultrapure water systems General chemical or biological lab work requiring reliable Type 2 water quality

Condition: used, Year of construction: 2022, Duplo booklet maker System 5000 offer consists of: - 3x collators DSC-10/60i - bookletmaker DBM-500 - trimmer DKTS-200 Duplo System 5000 booklet maker 3xDSC-10/60i: collator - number of bins: 30 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets Nodpfx Aey Uifregyslc - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner with framework and additional PC RA1970 Manufacturer: Vitronic Components: with Item framework, fully mounted Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Nedpfx Ajk Abn Degyolc Speed sensors and connecting cables. Year of manufacture 2019 Currently an error in the channel, as the connection to the other machine does not exist. But can be solved by technical support Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg