Used Fliegl Dhka 390 30 M³ for sale (80,737)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5², tire condition: 100 %, Customized transport solution Configure according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled while loaded, when uncoupled, the vehicle must be tilted backwards. 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones With anti-spray flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering & start assist, activated 3 times by the brakes (start assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of ABS! With lifting and lowering valve Vehicle stability system Automatic tilting lowering + shut-off valve Wheels + Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw collar, fixed part, NW 48 mm. Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front panel 5 mm thick, with external side panels made of 30 mm hollow section profiles, cleanly welded, with upper profile designed to prevent spillage. Inside with access ladder on the front panel. Shovel and broom holder on the outside of the front panel. Greenline - conical and aerodynamic tipper body design Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, mounted externally with a double hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access ladder, connection plate for air/electricity and brake with plenty of space for the best possible operation. Roller cover on one side for stowing on the right, with central locking on the left Operating instructions For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust. The stated total weight is technically possible; depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Bdjdpfx Aji Ri H Ijpved Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Bdsdjy Rl Unspfx Apved Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Bodpfei Ri Idox Apvsdd Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis, Semi-Trailer, Tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones With anti-splash flaps, only on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle – Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit’s display, via EBS, without installation in the truck (this must be available in the truck. Only on base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connection cable Bodpfxsi Ri Ihe Apvsdd Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck auxiliary drive Tipping Body Aluminum box tipper body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with outer wall made of 30 mm hollow chamber profiles, neatly welded, with top edge profile that prevents material from spilling out. Inside with access ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline – tapered and aerodynamic tipper body design Membrane – rear wall Rear wall with double-joint hinge, mounted to allow movement, with 2-part door division 1/2 to 1/2, at the top with a pivoting gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor consistently 6 mm thick Standing platform with access ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roller cover, single-sided for depositing on the right-hand side, with central locking on the left-hand side Approval Country/Signage Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagra

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information: Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled with load, in the uncoupled state, the vehicle must stand at an angle towards the rear. 2 chock blocks + holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones with anti-splash flaps on the last axle 1 tarpaulin rod + holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and start-up assist, operated 3x by braking (start-up assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: Trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! with lifting and lowering valve Vehicle driving stability system Bdjdpfei Ri R Iex Apvod Automatic tilting lowering with shut-off valve Wheels & tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part NW 48 mm. Actuation via truck auxiliary drive Tipping body Aluminum box body, sloping front wall 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Inside with ladder on the front wall. Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double hinge, externally mounted with a double hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for storage on the right, with central locking on the left. Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, so that it is not attacked by the material and does not rust. The stated total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of approval/signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented without support leg Wheel chocks + holder Underrun protection, foldable Semi-shell fenders integrated fender holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist, actuated by 3x brakes (starting assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable with lifting and lowering valve Vehicle driving stability system Wheels & tires 385/65 R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Sloping front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with upper edge profile to prevent material spillage. Inside with a ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a double hook lock. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with max. grain size up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operation. Rollover tarpaulin, one-sided for laying down on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution possible) Country of approval/ Signage Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Tipper body R Bjdoi Ri H Sopfx Apvjdd

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, loading space volume: 38 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle Tipper Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling not possible with load, in the uncoupled state, the vehicle must be tilted backwards. 2 chock blocks with holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface resistant to stone chipping With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, actuated 3 times by the brakes Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome-plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant steel, front wall 5 mm thick, with external stiffeners made of 30 mm hollow profile, cleanly welded, with an upper profile that prevents spillage. Inside with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with 2-fold hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roller cover, one-sided for placement on the right side, with central locking on the left side Painting Bdjdpfx Apji Riz Roved Frame DB 7350 Novagrau 10 years Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images. The vehicle may still be in use! Unbeatable unladen weight! Bdsdpfxey Rlvrj Apved Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, kingpin plate with interchangeable 2" kingpin Curved front panel "Patented" 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2x chock blocks with holder Aluminum side underrun protection Underrun protection, foldable 6x half-shell fenders Integrated "fender holder," surface is dirt-repellent 2x with anti-splash flaps, only on the last axle 2x tow hooks at the rear Axles + Suspension SAF disc brake axles Axles in off-road design "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, activated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism," 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 6x 385/65 R22.5", manufacturer at the discretion of the manufacturer 6x steel rims, manufacturer at the discretion of the manufacturer Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow profile, cleanly welded, with top profile that prevents material from spilling. Interior with climbing aid on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - tapered and aerodynamic tipper body shape "Membrane" - rear wall Rear wall as a swing-open flap with "double-joint hinge," externally supported with double hook lock. Rear wall with rubber seal Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel, and rolled gravel with a maximum grain size of up to 20 mm! All other goods are excluded from the warranty! Rolltarp, single-sided, for storing on the right-hand side, with central locking on the left-hand side Unbeatable unladen weight! The images are archive images. The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Bdsdpsy Efcuofx Apved Archive images are shown!

Condition: used, machine/vehicle number: WFDFLT33902030053, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 9,200 mm, loading space width: 2,470 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,540 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis - Tipper Semi-Trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Patent-protected curved front end 24 t 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser measured" - reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift function, including forced lowering and traction assistance, activated by "brake 3 times" (traction assist is operational up to a 30% axle load exceedance and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System 2-line compressed air braking system Spring actuated parking brake 2 front interchangeable coupling heads, without connecting hose EBS - Electronic Braking System with EBS socket at front, without connection cable Attention: This trailer may only be towed by tractor units that ensure full ABS functionality! With lift & lower valve Vehicle - Driving Stability System Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrical System 24 Volt, multi-chamber lights, LED side marker lights (amber) 2 x 7-pin interchangeable sockets at the front, without connection cable, electrics not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, wear-resistant material. Sloped bulkhead, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precision-welded, with upper rail profile for protection against bulk cargo. Interior access on the front wall (not in combination with Cramaro cover). Shovel and broom holder on front wall exterior. Greenline - conical and aerodynamic body design "Membrane" tailgate Rear wall suspended with "double hinge" and split 1/2 to 1/2 two-wing door, swing arm on top, with one grain slide per door. Floor plate continuous, 6 mm thick Standing platform with access, connector plate for air/electricity and brakes, with spacious area for maximum operability. Roll tarp can be opened to the right (FR-right) and locked on the left (FR-left) with central locking. Operational Notices For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible. Depending on the type of load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Bdjdpfxey Edtfs Apvjd Note! Not suitable for chemically aggressive materials (e.g. acids, chlorine compounds, sulfur compounds, "refuse-derived fuels"); such substances can cause stress corrosion cracking on damp body surfaces, potentially resulting in severe fracturing of the body structure. Vehicles with loading bodies are designed for non-chemically aggressive loads. Transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at your own risk. This may lead to stress cracks or pitting corrosion damage. The images shown are archive photos. The vehicle may still be in use.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,500 kg, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 9,830 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 41 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Chassis, Saddle, Tipper Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation 2 chock blocks with holder Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface resistant to stone chipping With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, including forced lowering and starting assist, activated 3 times by the brakes (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy maintenance. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Bdedpfx Aji Ri Efepvjd Operation hydraulically via truck auxiliary drive Dump Body Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with a top profile that prevents spillage. Interior with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - tapered and aerodynamic dump body shape Membrane - Rear wall Rear wall pivotally mounted with double-joint hinge and with 2-part door division 1/2 to 1/2, at the top with swivel gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Bottom continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large space for best possible operation. Roll-up cover on one side for placing in FR-right, with central locking in FR-left.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front Bdsdoi Riwujpfx Apvod 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material. Bdjdpfey Rrpljx Apvjd

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate Bdedpfx Aorvu Snjpvjd * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Bdedpfx Asi Riziepvod Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis, semi-trailer tipper Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wedge blocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires. Bdjdpfx Apsi Ri Dpjvsd Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal ("flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs galvanized Body RAL desired color, solid color Roller cover RAL 7035 light gray

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, and tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without extension compensation Chocks with holder Rear underrun protection, foldable Semi-shell mudguards Integrated mudguard holder, surface designed to repel stones With anti-splash flaps, only on the last axle Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reduces tire wear and fuel consumption Bdedsi Rivdepfx Apvjd Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connection line EBS, electronic brake system with EBS socket in the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets in the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Inside with access ladder on the front wall. Greenline - conical and aerodynamic dump body shape Shovel and broom holder on the outside of the front wall Membrane - rear wall Rear wall as a pivoting flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with toggle closures on the lower side. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connection plate for air/electrical and brake connections with ample space for the best possible operation. Rollover cover on one side for storage on the right-hand side, with central locking on the left-hand side Country of registration/plates Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, RAL color of your choice, single color Rollover cover,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Bdjdpfx Aei Ri A Iopvjd Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Bdedpfx Aoi Rizfopvjd Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Bdodpfx Apoy Snmpovsd Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: good (used), axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2022, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 10 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 315 € per month (default, 60 months); Ask for further information and conditions = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price Bdedpfxsy Hcnke Apvjd • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,700 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, wheelbase: 8,970 mm, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 32920 kg, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Sunroof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: OX-71-GS Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Tare weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Bdedpfjy U Ut Usx Apvsd Functional Sunroof: Yes Environment Emission class: Euro 0 Maintenance APK (Periodic Vehicle Inspection): valid until 11.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €334 per month (default, 60 months); Please inquire for further information and conditions = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029968, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, The pictures are archive pictures, the vehicle may still be in use! Bedowk Dckspfx Apvodd Equipment on request!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Vario end walls Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes Bedpfx Asi Ri R Depvjdd 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 r19.5, tire condition: 100 %, Additional information: Fine-grain steel welded construction, + Preload with light pretension in the neck area, turntable + with interchangeable 2 kingpins, outer frame slightly inclined, new design with Load-Lock profile for securing lashing straps, 24 tons, 2-speed support winch, single-sided operation, with straight lower section, without lateral thrust compensation. Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door latch on the side, 2 support wedges with holder, side impact protection made of aluminum, under-run protection made of galvanized steel, quarter fender in front of the 1st axle and behind each axle, with anti-splash flaps according to EC, rear impact protection. SAF disc brake axles, axle/chassis laser-aligned to reduce tire wear and fuel consumption, air suspension. 2-line compressed air brake system, color-coded lines for easy servicing, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle stability system. 435/50R19.5, manufacturer's choice, steel rims, factory silver. 24 volts, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front, 2 white/red side marker lights at the rear, 2 x 7-pole non-interchangeable sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle loads up to max. 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a volumetric design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at a height of approx. 140 mm with steel impact protection. Center posts: 3 pairs of sliding posts that can be moved along the entire length, with 4-fold pockets and a long pocket at the bottom, 3 pairs of post positions. Bjdpfx Apei Ri E Hsvjdd Sliding slats: 5 rows of wooden slats. Rear wall/corner posts at the rear: Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel locking mechanisms each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof rail for the automotive industry, internal width between the roof rails, approx. 2,490 mm, tarpaulin color: white, 400 roof non-elastic, minimal deflection of the roof rail during loading and unloading, optimal rain deflector at the rear, at the top of the end rail, above the doors, EcoLift - lifting roof can be raised by approx. 380 mm with gas spring support, 3 driving positions at the front: internal height at the front approx. 2900mm/2950 mm/3000 mm, set to approx. 3000 mm. Germany, test approval according to EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for superstructure strength according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the lower part of the side tarpaulin and at the top in the corn