Used Honing Machine Shm - Manual Honing Machine for sale (72,694)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Fpjdpsw Upzxefx Adcoh

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fjdokvnc Sjpfx Adcsph Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Fsdow U Uh Djpfx Adcsph Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: used, functionality: fully functional, HONING MACHINE Make: SUNNEN Type: MBB-1680FMS/GMS Minimum diameter: 1.5 mm Maximum diameter: 165 mm Supply voltage: 220/380 V Frequency: 50 Hz Phases: 3 phases Control voltage: 110 V Rated current: 5.2/3.0 A Maximum motor current: 2.6/1.5 A Fpedpfszb Dy Nex Adcoh Electrical diagram: WD 1023 Dimensions (mm): 1250x750x1400 Weight (kg), approx.: 350-400

Condition: new, Year of construction: 2026, HSBM 2020-20 SB - Manual swing bending machine HSBM SB - Manual swing bending machine in heavy design with segmented upper tools simple operation segmented upper tools swivel bending function with secure clamping of the workpiece by pretensioning of the upper beam heavy, compact welded construction for easy bending with exact adjustment of the bending angle by means of stop with scale particularly low-maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note on technical data: max. sheet thickness: performance data related to material with tensile strength 400N/mm²; bending capacity VA: factor 0,75; bending capacity Alu: factor 1,2; for bending VA hardened upper tools are required Model HSBM 2020-20 SB Article-No. 3772920 Technical data working width max. 2.020 mm bending capacity max. steel 400 N/qmm 2 mm Bending capacity max. steel 400 N/qmm without cheek widening Bending capacity max. steel 400 N/qmm w. cheek widening Bending capacity max. stainless steel 1,5 mm Bending capacity max. aluminium 2,4 mm Bending angle max. 135 Segment division Clearance between upper and lower cheek max. 120 mm length 2500 mm width 710 mm Fjdpscnxc Nofx Adcsph height 1500 mm Weight 1.020 kg Location: Ex works - free on truck -

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Fjdpfx Adjzcv Uuocoph Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: used, functionality: fully functional, input voltage: 400 V, Precision Cross-Honing Machine Sunnen Eclipse EC-3500 CGM-27 used Bore diameter – honing range: 1.5 – 165 mm Stroke length – honing length: 6 – 170 mm Spindle speeds: 200 – 3,000 rpm Strokes: 60–500 strokes Total power requirement – spindle drive: 4.1 kW Reciprocation motor: 1.1 kW Machine weight approx. 1,200 kg SICK safety light curtain Fsdpfsyx Dv Hex Adceph Horizontal cross-honing machine / honing machine type EC 3500 and operating manual Inspection under power possible by prior appointment. Price on request All technical data subject to misprints/errors Sale exclusively to EU countries.

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. Fodpow Rv Taofx Adcjph *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest Fpjdju Ngybspfx Adcsh total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Fpoded Rmcmspfx Adcjh Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: used, Sunnen brand honing machine, model MBB 1400 EMS. Fjdpeza Hd Iofx Adceph

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  Feded Ab T Rjpfx Adcsph - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Fpodpoi Ezq Defx Adcoh Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V Fodpefibfgsfx Adcjph 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design Fpjdpfezb Enzex Adceh The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: used, Technical details: honing diameter: 4-31 mm Fsdpfx Adowx Shkecsph stroke: 350 mm throat: 250 mm

Condition: good (used), Year of construction: 2001, Guillotine Boschert EL300 AMADA tool system Fpedjdnny Repfx Adcjh tool station D diameter 88.9 mm New tool adapter A / B / C station Punching power: 280 kN (28 tons) Punching arm RADIUS 350 mm Side stop 500 mm right/left Depth gauge with digital display Page attacks new, Weight 2300 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Fpodoud Nm Repfx Adcoh Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles Fjdey Umatjpfx Adcoph -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125 Fpsdjx Szm Aopfx Adcjh

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 5,000 kg, spindle speed (max.): 2,987 rpm, total width: 3,000 mm, total length: 36,000 mm, space requirement height: 2,500 mm, space requirement length: 37,000 mm, space requirement width: 3,000 mm, We are offering this used Sunnen HTC 16000 honing machine, year of manufacture 1999. It can also be adapted for 6m lengths... Manufacturer: Sunnen HTC 16000 Model: HTC 16000 Year of manufacture: 1999 Condition: used Category ID: 222 Type ID: 2524 Machine type: honing machine Fjdsyx Hazopfx Adceph • Max. stroke: 12,000 mm • Current working length for tubes: 17,200 mm (divisible into 6 m sections) • Spindle speed (idle): 2,987 rpm • Rated power: 5,500 Watts • Internal diameter range: Ø23.2 mm to Ø205.00 mm • Clamping fixture: prism/chain • Max. workpiece weight (internally used): approx. 5 tons If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Vertical Honing Machine WMW VEB SZS 200x1000 C – in good working condition, under power For sale: vertical honing machine from the well-known German manufacturer VEB Werkzeugmaschinenkombinat, model SZS 200x1000 C. The machine is in good technical condition, hower not under power currently. Suitable for precise machining of cylindrical bores. Condition and availability Condition: used, NOT under power Availability: immediately available Fedjyy N Drspfx Adceph Technical specifications Max honing length: 1000 mm Max honing diameter: 200 mm Additional information Assistance with transport can be arranged

Condition: used, Year of construction: 2023, machine/vehicle number: 855-23-01, spindle speed (min.): 10 rpm, spindle speed (max.): 250 rpm, total height: 1,600 mm, total width: 2,500 mm, total length: 11,000 mm, overall weight: 4,000 kg, rotational speed (min.): 416 rpm, rotational speed (max.): 250 rpm, Machine Data Installation dimensions: approx. 10000 × 2500 × 1600 mm Weight: approx. 3000 kg Capacity Max. outside diameter: 650 mm Max. stroke/travel: 4500 mm Max. honing length: 4000 mm Performance Data Speed: 10–250 rpm Drive power (rotary): 4 kW Stroke speed: 1–25 m/min Drive power (stroke): 3 kW Pneumatic Data Air pressure (min.): 5 bar Air pressure (max.): 9 bar System: pneumatic feed unit (automatic friction control) Control / Technology HMI: SIMATIC HMI Technical Data Voltage: 400 VAC Control voltage: 24 VDC Frequency: 50 Hz Connected load: 63 A Conformity: CE Cooling System Tank capacity: 1000 l with filtration system Fpodpfx Aoy H I Ipjdcjh Weights Net weight: approx. 3500 kg Gross weight: approx. 4000 kg Transport Dimensions Dimensions: approx. 11000 × 1000 × 2100 mm

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Fodpfx Aoy Iu Ixedcsph Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg Fpodpfx Aspgmq Uodceh option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document