Used Alko Mobil Jet 100 for sale (67)

Condition: used, Motor output 1,5 kW Air consumption 1140 m³/h Dimensions (L/W/H) 1200x450x2000 mm Iislhsvwfupscdw Eob 100 mm used, good conditionmake Alkotype Mobil Jet 100clean air unit / vacuumfor chipsGS-dust testedmotor 1,5 kWconnection diameter 100 mmcompression 2180 capacity 1140 m³/hfilling tons 1 piece / 135 literscartridgefilter cleaning manualnew price approx. 3.500,00 EURspace requirement approx. 1200 mm x 450 mm x 2000 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee

Condition: excellent (used), Year of construction: 2001, Suction unit Alko Mobil Jet Year of construction 2001, 0,75 kw H2 tested 220 Volt, Filter area 3.45 m² 1085 x 650 x 1974 mm Nominal volume flow 700 m³/h Ieloq Abzhehcdw Esib Manual cleaning 82 db(A) Spigot 100 Ø New waste garbage can

Condition: good (used), Year of construction: 2005, Al-KO Mobile Extractor Max. flow rate 3532 m³/h Nominal flow rate 4900 m³/h Islhcjwkt Uiedw Eeib Extraction nozzle 250 mm Valve pressure 2740 PA Motor power 6.5 kW 2 chip collection barrels Compressed air connection 8.5 bar Weight approx. 700 kg The technical data was taken from a brochure and is therefore without guarantee.

Condition: used, Year of construction: 2005, Extraction nozzle: 200 mm Motor: 4.0 kW/400 V, 3-50 Hz Nominal flow rate: 2920 m³/h Negative pressure: 1900 Pa Filter area: 15 m² Filter material: Polyester needle felt with surface treatment, Category C Filter cleaning: Compressed air Chip collection volume: 2 x 250 l Max. sound pressure level: 75 dB (A) Dimensions: 2307 x 830 x 1850 mm Weight: 340 kg Storage location: Supplier Iolswb Tp Iohcdw Ejib

Condition: excellent (used), filter area: 30 m², overall weight: 900 kg, nominal flow rate: 6,000 m³/h, nominal power: 7.5 kW (10.20 HP), motor voltage: 400 V, Dust extractor AL-KO, Type: Mobil Power JET 300, Year: 2008 For installation in the work area Manufacturer No. 2433337270 Type of vacuum dust extractor Nominal volume flow 6,000 m³/h Minimum volume flow 5,089 m³/h Iielhotvw Srocdw Ejb Vacuum pressure at the interface at minimum volume flow 2,280 Pa Filter area 30 m² Filter material Cat.C electrically conductive Residual dust content H3 (

Condition: good (used), Year of construction: 2007, inlet: 250 mm, Dust extraction,sawdust extraction,self-cleaning vacuum pneumatic filter Alko Mobil JET 250 Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Iolhoqwyafecdw Eoib Ideally suited for wide-belt grinders and all kinds of dry dust in various technological processes. 6.5 Kw fan Capacity 4900 m3/h Vacuum 2740 Pa Spigot diameter 250 mm Air return Technical documentation included

Condition: used, Year of construction: 1998, used, good conditionmake AL-KOtype Mobil Jet 200year of manufacture 1998clean air unit / vacuumCE type-testedmotor 3.0 kWconnection diameter 200 mmpressure pa. 2360Air capacity 2260 m³/h2 filling barrels 2x 0.19 m³Pressure displaySpace requirement approx. 2000 mm x 830 mm x 2160 mmWeight approx. 250 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspected,without guarantee and warranty Islhcdjvwfk Rjw Esib

Year of construction: 2009, Condition: used, offer consists of: Alko Mobil-100 trimmings blower for perfect binder Iielsu Srn Nshcdw Esb - weight: 24kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1996, incl. switch cabinet for start-up slide control 24 Vused, good conditionmake AL-KOtype Mobil Jet 200year of construction 1996clean air unit / vacuumGS-dust testedmotor 3,0 kWconnection diameter 200 mmcompression 1560 capacity 2780 m³/hfilling barrels 2 piecesfilter cleaning ssure displaynew price approx. 11.300,00 €space requirement approx. 2000 mm x 1000 mm x 2200 mmweight approx. 500 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without guarantee and warranty Iielevwfglohcdw Eeb

Year of construction: 2021, Condition: new, Excellent value for money Mobile in the workshop can be used *. High suction power significantly reduced dust (dust class L) Robust, reliable construction Options: filter cartridge, floor cleaning kit *. From the frame up robust engine, economical in terms of energy consumption, strong in the suction power. The AL-KO raw air dust extractors Mobile family are easy to handle and can be due to their low weight and the integrated castors always there, where you need their suction power. Iiolhcdwecnz A To Esb * In the wood and wood products, raw air dust extractors are not approved for use in workplaces in Germany, Austria and Switzerland. * Standard incl. 2 meters hose Technical data suction pipe of 160 160 mm motor nominal power 1.5 kW / 3 pH voltage 400 V / 50 Hz Flow rate 2,200 m³ / h vacuum 2,500 PA filter surface 2.2 m 2 chip sample volume 175 liter Dimensions (L x B x H) in mm 1,090 x 580 x 2,098 Weight 40 kg Location: Off the shelf 54634 Bitburg

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters. Ioljwhn T Ijhcdw Esib

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg Ielhcdohby Risw Eoib

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Ielhcdwsv Svc Hs Eeib

Condition: ready for operation (used), Year of construction: 2009, Construction: Clean air chamber/fan/filter chamber/pre-separation chamber/disposal unit, Explosion pressure resistance: 200mbar, Motor power: 30kW, Nominal volume flow: 14000m³/h, Total pressure: 4700Pa. Number of filters: 128, filter length: 2500mm per filter, total filter area: 120m², filter category: BIA category C, machine dimensions X/Y/Z: approx. 4300mm/1600mm/9900mm. Including rotary valve ZRS 960, year of construction: 2009, number of blades: 7, inlet: 250mm/960mm, outlet: 208mm/960mm, motor power: 0.18kW, rotary valve speed: 4rpm, rated current: 0.8A. The frequency converter of the fan is defective. Documentation available. On-site inspection is possible. Iolju Izr Nshcdw Eeib

Year of construction: 1998, Condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Iiolhcdjiu Hq Dsw Ejb Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories -High flexibility -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Filter surface: 2 m² ( 2 x 1 mtr.) Connection diameter 300 mm with throttle valve Islhcdebpg E Eow Esib Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Iiolhcov Svcysdw Ejb

Year of construction: 2022, Condition: new, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Iiolsbumr Sjhcdw Ejb Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Iiolhcdsvwfm Ssw Eeb

Condition: used, Year of construction: 2000, Functionality: unexamined, Air flow rate 16,000 m³/h Filter area 160 m² Iolhewa Il Uscdw Esib Number of filters 250 Outdoor installation AAGAARD fan 30 kW, 1450 rpm, air flow 14,500 m³/h, connection diameter 500 mm

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Iolhefc A Urscdw Eeib Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h Iijlhswhpcqocdw Esb - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: new, Alko clean air dust extractor POWER UNIT 200 P Motor power 3.0 kW 3 Ph, 400 V, NW 200 mm, nominal volume flow 2262 m³/h according to GS-HO-07, max. volume flow 3010 m³/h Ijlhcdwjq T Nb Ae Ejib Compressed air cleaning, pre-separator, 2 filling containers 165 L each (net) with jet cleaning with dust bulkhead

Condition: new, Year of construction: 2025, AL-KO APU 300 P Clean Air Dust Extractor Technical Specifications 300-P Intake manifold: 300 mm Ielhcdwjrrw Tbe Esib Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. flow rate: 6,000 m³/h Nominal flow rate: 5,089 m³/h Vacuum pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Delivery time upon request

Condition: new, Year of construction: 2025, AL-KO Clean Air Dust Extractor APU 250 P Technical Specifications Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. flow rate: 4900 m³/h Nominal flow rate: 3524 m³/h Iislhcdewahlujw Ejb Vacuum pressure: 2451 Pa Filter area: 22.4 m² Chip collection capacity: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Delivery time upon request