Used Alko Mobil Jet 160 for sale (68)

Condition: good (used), Year of construction: 2007, Used Al-ko clean air dust extractor, Intake nozzle: 160 mm Pedpfx Adsw Aptljisgw Motor rated power: 2.2 kW / 3-phase Voltage: 400 V / 50 Hz Nominal air volume flow: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 litres Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1998, suction capacity: 4,900 m³/h, extraction connection diameter: 250 mm, inlet: 250 mm, Dust extractor, chip extraction unit, self-cleaning pneumatic negative pressure filter Alko Mobil JET 250 The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is positioned on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust in various technological processes. Pgsdpfsqwyafox Adisw Fan power: 6.5 kW Airflow: 4900 m3/h Vacuum: 2740 Pa Connection diameter: 250 mm Air return Stock no.: 1020

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Clean air dust extractor for installation in the work area. With subframe for briquetting press, container size 1400 x 1400 mm. Technical data: Inlet port 250 mm Motor data 7.5 kW; 13.7 A; 3 phase; 400 V/50 Hz; IE3 Pgjdpfx Aew Hrqnsdijw max. air flow rate 4,900 m³/h Filter area 22.4 m² (63 x Ø 95 mm, 1,150 mm length) Filter cleaning by compressed air Filter material cat. M Max. sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201, measured at 1 m distance) Residual dust content H3 /

Condition: excellent (used), Year of construction: 2001, Suction unit Alko Mobil Jet Year of construction 2001, 0,75 kw H2 tested 220 Volt, Filter area 3.45 m² Pgodpfxoq Abzhe Adiew 1085 x 650 x 1974 mm Nominal volume flow 700 m³/h Manual cleaning 82 db(A) Spigot 100 Ø New waste garbage can

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 160 P : - Intake port Ø: 160 mm - nominal motor power: 2,2 kW; 400 V/50 Hz - max. volume flow: 2000 m³/h - nominal volume flow: 1448 m³/h - negative pressure: 2503 Pa - filter surface: 9 m² - filter cleaning: Compressed air cleaning - Filling container (roll container): 241 litres - Dimensions ( L x W x H ): 1684 x 830 x 2050 Psdpfx Ajbpg Itediogw - Weight: 288 kg - execution / operating side alternatively right / left Location: ex stock 54634 Bitburg Top price for the show piece

Condition: used, offer consists of: Alko Mobil-100 trimmings blower for perfect binder - suction diameter: 100mm - max. air quantity: 865m/h - pressure differential: 1780 Pa - motor output: 0,75kW - filter surface: 1,08m2 - filling capacity: 90ltr. - category of filter: G - max. noise level: 81 dB(A) We can also organize the following for you: Pgjdpfjw Ewzpsx Adiew packaging, loading, transport ( by ship or plane) including customs

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve Pgsdpfx Aeu T Hrpjdijw

Condition: used, Year of construction: 2003, functionality: fully functional, AL-KO MOBIL 100, mobile extraction unit, year of manufacture 2003, 865 m³/h, 1780 Pa, 230 Volt Pgedpoxf E R Ajfx Adiew

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes Podpjwwt Tlefx Adiogw - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Psdpfxov Svc Ho Adijgw

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories -High flexibility -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Filter surface: 2 m² ( 2 x 1 mtr.) Pgjdpfx Adsbpg E Eeiow Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Year of construction: 2009, condition: used, offer consists of: Podpfxsu Srn No Adisgw Alko Mobil-100 trimmings blower for perfect binder - weight: 24kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1998, functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. Pgedpfjwhn T Isx Adiow High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters.

Condition: good (used), Year of construction: 2000, Paint mist extraction Colour Jet 58-1 - Year of manufacture: 2000 - 1 kW - new filter - with side guide plates - 5800 m³/h Podpjxflunofx Adisgw - Weight 105 kg

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options Pedewwtuijpfx Adiegw - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Pgsdpev Svcyefx Adiow

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Pgodebumr Sjpfx Adiew Weight: 175 kg

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 Pedpfeiu Hq Dex Adijgw 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. Pjdpohby Riofx Adiegw It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, Thanks to their modular design, the PROFI JET® series system filter units enable the bespoke planning and construction of extraction solutions for virtually any required air volume and practically every conceivable application. The proven system also impresses with outstanding noise protection due to its insulated wall panels and, when installed outdoors, minimizes heat loss. Eligible for BAFA funding under Module 4. Operation: The custom-designed extraction systems of the PROFI JET series are built on a robust steel frame. The frame is fully clad with insulated, double-walled, powder-coated steel sheet panels to ensure that all components—including fan, filter cleaning, and discharge elements—are protected from dirt and weather within the closed system enclosure. The clean-air side fans are installed at the top of the unit and draw in dust- and chip-laden air into the filter section. A generously proportioned pre-separation chamber ensures effective separation of coarse particles and chips. The subsequent filter bags or cartridges remove any remaining fine dust. The cleaned exhaust air is routed through a sound-insulated return air chamber either back into the building or discharged outside. Applications: - Extraction at multiple processing machines, workstations, or entire production areas - Spatial ventilation and extraction for enclosures and work cabins - Suitable for virtually all types of dust and chips - Also for dusts and applications with ATEX classification - Extraction especially in the wood, plastics, metal, welding, cutting, and recycling industries—as well as many others Advantages: Pgsdswwryqepfx Adijw - Custom, precise planning and implementation of your extraction system - Cost-effective and quick delivery due to modular design with standard components - Quiet and energy-saving operation thanks to insulated panels - Consistently high extraction performance due to integrated pre-separation chamber and AL-KO OPTI JET® filter cleaning system - Heating cost savings, as 100% recirculated air operation is possible in many cases - Minimal space requirements due to compact construction - Suitable for indoor and outdoor installation - Professional appearance thanks to powder-coated panels - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individualized system configuration - Eligible for BAFA funding under Module 4

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Pgedpjvwfm Ssfx Adijw

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops Pedpjwv T R Ujfx Adijgw - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left Pgjdpfxefydzbe Adiow • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Year of construction: 2021, condition: like new (used), machine/vehicle number: 021032-01610, MTA air cleaner Manufacturer: AL-KO Type: Airsafe 1600 Professional air cleaner for large rooms (conference rooms, school classes, etc.) from 48 to 182 m2, air volume infinitely variable, with pre-filter and main filter (particulate matter filter) HEPA 13, control unit and filter change indicator. 1x replacement filter Stepless control LOW MID HIGH Air filtration in m3/h 800 1300 1600 Recommended room size* in m2 48 – 96 79 – 158 91 – 182 Sound pressure level in dB[A] 35 45 50 Power consumption in watts 31 116 191 Electrical connection: 230V/ 50Hz alternating current * Recommendation 3 to 6 times the hourly air filtration rate at a room height of 2.75 m Measured in a 9 x 10 x 2.75 m room, average room absorption, corner installation Pgjdpfx Adoim Rursijw Dimensions (W / D / H): 661 x 573 x 1900 in mm Weight: 128kg Serial No.: 021032-01610 Year of construction 2021 Condition: optically 1-2, technically OK second hand Used machines can have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Germany GmbH, 41334 Nettetal

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Pgsdsfc A Uropfx Adiow Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg