Used Hydraulic Hole Puncher Machine for sale (73,585)

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Voltage: 380 V Electric power: 1,5 kW Kedpfxjy E Twao Acfjlw Weight: 378 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Kedpfx Aey Uiyvecfelw Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Kledpfx Aoyuty Sjcfow Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops Kjdjxdttiepfx Acfolw - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, axle configuration: 3 axles, first registration: 09/2016, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 9,500 mm, color: blue, Year of construction: 2016, Equipment: ABS, Total loading floor, from the front to the ramp: 950 cm. Flat loading floor: 810 cm. Internal height: 309 cm. Front overhang: 370 cm. Height from the front to the roof: 261 cm. Sliding roof / Edscha roof. = Further information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Kledpfxozk H Uye Acfsw Rear axle 1: Twin tires; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 2: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 70%; Tire tread depth, right outer: 70% Weights Unladen weight: 9,200 kg Payload: 38,800 kg GVWR: 48,000 kg Maintenance APK (Technical Inspection): valid until 10.2026 Identification Model number: HYDRAULIC RAMP / FORK LIFT - MAC = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Universal dowel drilling machine Klsdszlbqfjpfx Acfjw with drilling from below heavy-duty cast iron table pneumatic swivel mechanism

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 1984 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control Kljdpjzk Nuvofx Acfsw with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight: 420 kg Availability: at short notice Location: Flörsheim

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Driven by any hand-held drill Working width 650 mm with 7 drill shafts Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Minimum drill hole spacing: 30 mm Availability: at short notice Klsdpfx Acjzk Nq Dsfew Storage location: Flörsheim

Condition: good (used), hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm Ksdpfsd S Ia Tox Acfelw -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm Kljdpfjdpvwiox Acfjw -Weight: 55 kg

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm Ksdpfx Ajdpvwhecfjlw -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

Condition: used, Year of construction: 2014, Second-hand machine Year of manufacture: 2014 Features and technical specifications: Complete standard version includes: - Support with linear guide comprising: 1 single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 blow-out, gluing and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication system - NC-controlled X-axis, with a working length of 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via a mechanical digital counter, position adjustable via the support table from 5–40 mm - Dowel insertion depth adjustable from 7–20 mm via a mechanical digital counter, drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted to the driving overhang - Closed gluing system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via the operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel container for 7.5 kg of glue and 7.5 l of water - Indicator light showing the remaining glue level in the glue reservoir - 1 left-hand side stop, 1 right-hand side stop and 1 centre stop (all removable) - 4 start buttons for individual operation with 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to a maximum of 80 mm, workpiece length (Y) min. 70 mm - 1 dust extraction funnel, connection Ø 80 mm Kodpszlbrvsfx Acfjlw - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15” TFT industrial display with capacitive touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling intervals freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and operation optimisation, 4 work areas assignable to different programmes, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional extras: - 1 electronic, optical G.I.C. glue monitoring system (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g. for Häfele Minifix) - 4 vertical 10° inclined clamping cylinders with mounting brackets - 1 keypad with mounting bracket Availability: by arrangement

Condition: used, Year of construction: 2005, Second-hand machine Klsdpfx Aezk N S Uscfew Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Specifications and technical data: - For horizontal and vertical structural drilling - For drilling rows of holes vertically in a 32 mm grid - Vertical drilling unit with dual-spindle drilling heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor at 2,800 rpm - Drilling heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Kljdpfx Aezk N Dwscfjw Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Universal dowel drilling machine with a swivelling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox, 2.2 kW motor with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment: 80 mm Drilling depth 80 mm Kjdozk N A Tjpfx Acfelw Weight: 420 kg Availability: at short notice Location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm Ksdpfx Aezk N Atscfolw - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine Condition: as expected for its age for efficient dowel hole drilling in longitudinal and transverse mouldings for framed doors, door panels Drawer components Crossbars of all kinds 3-spindle motor Spindle spacing 25/25 mm Stroke: max. 80 mm Motor: 1.5 PS Kedpfxjzk Ny Ss Acfolw Work table 260 x 130 mm Height adjustment from 5–40 mm according to scale with repositionable folding stop Foot valve control NRW

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Klsdjzk Nuiopfx Acfjw Storage location: Röllbach

Condition: good (used), functionality: fully functional, Capacity: 250 x 6 mm Electric, variable angle adjustment, independently adjustable from 30 to 130 degrees Drive: Hydraulic Blade height and depth adjustable via potentiometers Table dimensions: 1200 x 900 mm Motor power: 5.5 hp Connection voltage: 380V Length: 1000 mm Width: 1200 mm Height: 1400 mm Weight: 1200 kg VAT/margin: VAT: The price shown is exclusive of VAT (VAT is deductible for businesses) Kledpszi Hi Ujfx Acfsw Please note: The information on this page has been obtained and compiled to the best of our knowledge and belief, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we advise you to verify all relevant details.

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, Kedjvtm Ayjpfx Acfelw pressing device, stop rulers

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Kledpfey Ehzgox Acfjw Weight 310 kg Number of boring spindles 23 St.

Condition: good (used), functionality: fully functional, rotational speed (max.): 27,000 rpm, rotational speed (min.): 27,000 rpm, number of spindles: 1, Swallowtail groove milling machine in good condition. Price does not include shipping; collection only. Kledpfx Aozmyppecfsw

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Kljdpozdkbkjfx Acfew Type Hydromat. Also ideal as a spare parts machine.

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Kjdpfxsw I Um Hs Acfslw Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2010, travel distance X-axis: 325 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 210 mm, table length: 460 mm, The BT-E is a compact drilling EDM machine from Madra-EDM GmbH (the “Bohrteufel” series). It is used to create starting holes for wire EDM machines or to produce precise cooling channels in tools and molds. This model is particularly suitable for toolmaking, mold making, and hard metal machining. Features: • EDM fluid: Water or WITOL-BT (for higher performance) • Drilling diameter: Ø 0.2–3 mm • Materials: Hard metal, hardened steel, stainless steel, copper, brass, aluminum • Axes: ◦ X-axis: 325 mm ◦ Y-axis: 210 mm ◦ Z-axis (servo-controlled): 350 mm • Digital display: X/Y/Z axis • Electrode length: up to 400 mm • Workpiece weight: max. 200 kg • EDM fluid tank: 20 liters Table clamping area: 460 × 210 mm Klsdpfx Ajzkucrscfew Travel X: 325 mm Travel Y: 210 mm Travel Z: 350 mm (servo-controlled) Max. workpiece weight: 200 kg Electrode length: 400 mm Drilling diameter: 0.2–3 mm EDM fluid: Water or WITOL-BT Tank volume: 20 liters