Hydraulic punch, punching frame for use with punching units, hydraulic hole punch, hydraulic press.

JOKA + HAWE HP-S -- SW 20

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Nedpfogu U Itex Abuolh

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Nledpfxozvm Azs Abueh - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Nedpfx Absxzr E Eeujlh Forklift can be inspected and test-driven at our premises! Transport can be organized on request!

Condition: used, Mixing Grinder 130 mm hole plate diameter Nlsdpfx Aohzcg Nebush Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Nedpfexlcpvjx Abuslh Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm Nlodpfx Aefyadbebush - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Nlodpfx Aed Swtaebuoh Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Year of construction: 2026, condition: new, functionality: fully functional, power: 1,500 kW (2,039.43 HP), overall weight: 1,800 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness of 3-4 mm. Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 13250 E make material feeding easier. The E-series laser metal machine has a maximum travel speed of 80 meters per minute. Laser power can be up to 1,5 kw. The bed here is made of steel. You can give our managers a call for additional details! Nsdpfx Abjiicw Eeuolh Wattsan 1325 E characteristics Working area: 1300x2500 mm Laser power: up to 1500 W Weight: 1620 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Accessible from 4 sides Nljdpodqzhbefx Abujh Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Year of construction: 2005, condition: excellent (used), Pneumatic punching machine. Nsdpfxjff Apwj Abuslh