Used Kraft Heavy-Duty Lathe Bv-40160 for sale (13,444)

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter Fsdezi Duhepfx Al Sogh - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Fsdpfowhylvex Al Ssgh Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, Fgedpfx Aljx Hp Iws Soh 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Fodpfx Alezww R Se Sjgh

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 In perfect working order Stored indoors since dismantling Fgjdpsz D Erbofx Al Ssh The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, turning diameter over bed 2100 mm turning diameter over slide rest 1300 mm turning length 6800 mm workpiece weight 25000 kg main drive motor 140 kW Control Siemens type 840 C faceplate 1100 mm bed width 2500 mm steady 800 mm steady 800 mm steady 800 mm steady 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Fgjdpfxoyt Rzks Al Soh We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 11,000 mm, center height: 800 mm, feed length X-axis: 800 mm, feed length Z-axis: 11,000 mm, quill stroke: 200 mm, total length: 16,500 mm, total width: 2,100 mm, total height: 2,200 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 36,000 kg, rapid traverse Y-axis: 4,000 m/min, workpiece weight (max.): 40,000 kg, Heavy Duty Lathe, type TCG 160 x 11m after overhaul: regrinding of the bed and carriage plate, new bearings on the main spindle, new bearings in the tailstock, new control cabinet with new equipment, 100% new wiring, new cable carriers, new paint, geometry according to ISO 1708. The lathe will be ready in January/February 2027. Special equipment: • 1600 mm (63”) dia. faceplate with 4 jaws • 3-point roller steady rest, dia. 100–400 mm • 3-point roller steady rest, dia. 250–600 mm • set of quadrant gears Fodoz Hvynopfx Al Segh • electronic tailstock thrust indicator

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Fodpfsz Nkuaox Al Sogh Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Fedpfx Alewtrz Hj Ssgh Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: used, Year of construction: 1972, turning diameter over bed 920 mm turning diameter over slide rest 720 mm turning length 4000 mm turning speeds 1,4-280 U/min digital readout Acurite Fsdjyt Rx Aspfx Al Ssgh steady 640 steady 500 faceplate 900 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1980, turning diameter over bed 1930 mm turning diameter over slide rest 1520 mm turning length 5000 mm turning speeds 0,5-250 U/min spindle bore 105 mm workpiece weight 35 t steady 400-700 mm steady 700-1200 mm steady 1000-1600 mm control Siemens total power requirement 106 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Fgodpfeyutp Hsx Al Seh possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest Fodpfxju T Drys Al Ssgh The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: used, Year of construction: 1988, turning diameter over bed 2200 mm turning diameter over slide rest 1650 mm turning length 6000 mm 0 75 kW spindle turning speed range 2,8-600 U/min spindle bore 102 mm Height of centres 1100 mm accessories: Planscheibe, Futter accessories: Lynetten weight of the machine ca. 45 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Fsdjyqv Tmepfx Al Ssgh We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Fjdpfxjzdd E Rj Al Sjgh Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, Technical details: Fgsdex Ngzyepfx Al Seh turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies *

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Fgsdpfx Aljy D A D Te Sjh please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed max.: 4000 mm turning diameter over slide rest . mm turning length 7500 mm speed 0-750 u/min Fedpfeyqt Hksx Al Sjgh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Fsdeyy Nx Njpfx Al Sogh Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm Fgjdpfx Aszi Dhbol Ssh - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Year of construction: 2013, operating hours: 3,300 h, condition: excellent (used), functionality: fully functional, Used Terex Finlay 883 Tracked Screening Plant Year 2013 3300 Hrs (Hr Clock Has Reset At 3000. Common Issue On Terex Control Panels) Fgedpfoz Nlf Hex Al Ssh 16 x 5 Screenbox 55mm Fingers Top Deck & Mesh Bottom Deck CAT 4.4 No Adblue / DPF Very Good Unit. Ready To Go To Work 32,000 kgs Weight

Condition: used, Technical details: Fgedpfou Ix Rpsx Al Sjh turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: used, turning diameter over bed 1650 mm Fodsyqthbepfx Al Sjgh turning diameter over slide rest 1200 mm turning length 7500 mm turning dia. in gap 2500 mm spindle diameter 105 mm speed 3,55 - 180 (x24) U/min voltage 380 V 4-jaw faceplate Ø 1.600 mm Steady rest Ø 700 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Specifications Turning length (mm) 5000 Max. turning diameter (mm) 4000 Max. turning diameter at offset (mm) 5000 Speed ??1.4 - 71 (18x) kW 30 Voltage 380V Hz 50 Including: 4-jaw faceplate Ø 3150 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Fgodpfjyqtgdex Al Ssh than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Fgsdpfx Aoxddvnjl Sjh Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: TCG 160 x 5M, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 1,600 mm, disc diameter: 1,600 mm, LATHE AVAILABLE FROM STOCK The heavy double-guide lathe TCG is a universal machine tool that allows roughing and finishing turning, drilling, threading, turning cones, boring, heavy and very heavy objects with one clamping. The TCG lathe is a lathe for machining objects with diameters of 1600 mm. The construction system and rigidity of the structure allow turning with large chip cross-sections and ensure high smoothness with minimal ovalization of the workpiece. The machine is located in our company ZAK in Poręba ul. Zakładowa 2 (Poland) Fgjdpevw Uu Ssfx Al Ssh We encourage you to submit inquiries.