Heavy Duty Lathe

LEOPOLDO PONTIGGIA LH 10

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min Pgjdpfx Aajwzmpzozot spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Pedsy Hq Dyjpfx Aazjgt Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Psdpet Hwt Sjfx Aazogt Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 Pgsden D N H Tspfx Aazot WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm Pgjdpjtv Ikljfx Aazet spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: new, Year of construction: 1993, Ground plates 750mm, monoblock boom, 1 direct-mount bucket, ready for operation, display is unreadable, machine is 3.15m wide. Pgsdpfx Aajzkz Twozet

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Pedozaf Hnspfx Aazjgt Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Pgedpotx Dn Uofx Aazst

Condition: new, Year of construction: 2023, overall weight: 22,500 kg, For sale: 26 Siemens motors, new, from 2023. I will sell the entire lot or individual units. IE3 class. Pgodov Iymuepfx Aazst 1 pc. 894718.2 IE3 Motor, 3-phase, 55kW, 4-pole, 400|460V, 50|60Hz, Siemens, 1PC3105-2CB20-0FA0, 04/2023, on EPAL pallet, wrapped in foil. 1 pcs. 894721.1 IE3 Motor, 3-phase, 75kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB03-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 4 pcs. 894726.1 IE3 Motor, 3-phase, 132kW, 4-pole, 400|690V, 50Hz, Siemens, 1PC3005-3AB20-0CA0, 06 & 07/2023, on EPAL pallet, wrapped in foil. 2 pcs. 894727.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.1 IE3 Motor, 3-phase, 200kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894729.3 IE3 Motor, 3-phase, 250kW, 4-pole, 400|460V, 50Hz/60Hz, Siemens, 1PC4105-3AB03-4FA1, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.11000 IE3 Motor, 3-phase, 160kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 3 pcs. 895025.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 2 pcs. 895025.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11500 IE3 Motor, 3-phase, 110kW, 4-pole, 575V, 60Hz, Siemens, 1PC3105-3AB00-0CA1, 05/2023, on EPAL pallet, wrapped in foil. 1 pc. 895136.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895631.00020 IE3 Motor, 3-phase, 132kW, 2-pole, 660V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894719.11080 IE3 Motor, 3-phase, 75kW, 2-pole, 400V, 50Hz, Siemens, 6SL3203-0CE21-8AA0, 03/2023.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. Pgedjvcb U Aopfx Aazst We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven