Used Lodi T 40.20 Cn for sale (72,053)

Condition: reconditioned (used), Year of construction: 2010, TECHNICAL SPECIFICATIONS, MODEL T 40.20 CN Grinding length mm: 400 Grinding width with grinding wheel width mm: 225 Grinding height with new grinding wheel (on magnetic chuck) mm: 280 Magnetic chuck surface mm: 400 x 200 Longitudinal travel mm: 500 Transverse travel of the carriage under the table mm: 220 Adjustable table speed m/min: 1-30 Grinding wheel dimensions mm: Ø225 x 25 x 51 Grinding wheel rotation speed, fixed rpm: 3,000 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power 3 HP Hydraulic pump motor power 2 HP Net machine weight 1,500 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on SCHNEEBERGER linear needle slides and is controlled by a precision ball screw and a stepper motor. Vertical axis resolution: 0.001 mm. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The sub-table carriage slides on SCHNEEBERGER linear needle slides. The transverse movement is controlled by a precision ball screw and a stepper motor. Dimension read on the display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. - Longitudinal Table Movement A hydraulic cylinder and hydraulic unit located outside the machine control the table movement. VICKERS hydraulic pump SESINO air/oil heat exchanger for maintaining a constant hydraulic oil temperature Continuously adjustable table speed from 1 to 30 m/min. - Lubrication Centralized lubrication of all moving parts. - Paint Two-color paint: Safety white RAL 9003 + sky blue RAL 5015 ACCESSORIES - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various phases of the cycle: roughing, finishing, polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with LOSMA type DTE paper filter external to the machine. - Air/oil heat exchanger for hydraulic oil temperature - SPD electropermanent magnetic plate with 5+5mm fine poles, dimensions 400x200mm - Automatic dressing device mounted above the head. Hydraulic movement – ​​micrometer increments (0.001mm resolution) via stepper motor Bdsdpjx N I A Eofx Al Usg - Programmable automatic dressing operations within the cycle, with automatic grinding wheel wear compensation - Hydraulic unit located outside the machine - Grinding wheel flange with balancing shaft and grinding wheel - Standard machine guards

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure Bdedpfx Ajx N I Arol Ujg - Work light

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Bedpfx Alsx N I Als Usdg Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: used, Year of construction: 2001, Technical details: Bdedpfovbgr Rjx Al Usg grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. Bsdpfxex N I A Ss Al Ujdg • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: good (used), Year of construction: 2009, Thomas Super Trad 350 AO CN, a fully automatic bandsaw from 2009. This professional machine is designed for the precise and efficient cutting of steel, stainless steel, aluminum, and other metals. Thanks to its fully automatic operation, the machine is suitable for both serial production and single-piece work. Year of manufacture: 2009 Fully automatic CNC control Hydraulic material feed, clamping, and Bjdozur Aqepfx Al Uodg Automatic saw blade movement Miter cutting up to 60° Integrated coolant system and mist lubrication system User-friendly operation Includes bundle clamps for cutting bundles Technical specifications Cutting capacity 90°: Ø 270 mm / rectangle 350 × 240 mm Cutting capacity 45°: Ø 230 mm / rectangle 230 × 150 mm Cutting capacity 60°: Ø 140 mm / rectangle 140 × 140 mm Saw blade speed: 36 and 72 m/min Saw blade dimensions: 2,925 × 27 × 0.9 mm Maximum clamping opening: 355 mm Motor power: 2.0 kW Weight: approx. 1,180 kg

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Bdedszkbirjpfx Al Usg Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: Bedpfx Aljzx A Tbe Ujdg DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: not inspected (used), Year of construction: 2004, functionality: fully functional, operating hours: 3,450 h, input voltage: 400 V, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, total length: 3,500 mm, total width: 2,100 mm, total height: 1,800 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Welcome to Maschinenhandel Knipfer We would be happy to arrange a viewing of the machines on our premises by appointment. Since someone is not always on-site, please call or send a message in advance. ━━━━━ SCM SI 450 Vanguard A very nice panel saw with top-notch features! The machine is located in 92353 Postbauer-Heng. - Approximately 3,500 operating hours - Parallelogram support table - All axes CNC controlled - Scoring unit - Parallel fence adjustable with ball screw drive (high-end solution; it is usually adjusted with a steel bar) - On/off switch on the sliding table - Year of manufacture: 2004 - Including operating manual ━━━━━ IMPORTANT NOTE All information is subject to change without notice. Technical changes are reserved by the manufacturers. Price changes, sales subject to prior sale, and printing errors are reserved. Prices apply for collection. Bdodpfx Aoztduvol Uog Shipping is possible for an extra charge and by arrangement. A forklift is available for loading.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Bodezi Awhspfx Al Uedg Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Bedpfx Alezd Dfie Uedg Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2000, operating hours: 25,943 h, functionality: fully functional, machine/vehicle number: 175, total width: 1,350 mm, total length: 1,400 mm, total height: 2,250 mm, grinding spindle motor power: 1,100 W, input voltage: 380 V, overall weight: 1,450 kg, grinding spindle speed: 2,625 rpm, The machine is in perfect working order and underwent a major overhaul in 2020, during which the following parts were replaced or added: - All axes were replaced (including guides, lead screws, all bearings, and supports). Bdodszxup Ujpfx Al Usg - All gears and belts were replaced. - An automatic lubrication system was installed for all axes. - The internal lighting system was modified to highlight all sharp details. - LCD monitors were replaced. - The machine was fitted with an oil mist extractor. - Included is a replacement hard drive containing all the software.

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm Bedpfx Asy Sub Hel Usdg • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Bdedpfox Af I Asx Al Ueg Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Automatic tool changer Complete with all tooling and spares Bdsdpsydbigsfx Al Ueg Excellent condition as it has done minimal work Delivery and Installation available.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Bjdpfxsyvqdfs Al Ujdg Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2017, condition: used, overall weight: 45,000 kg, total length: 8,500 mm, total width: 6,500 mm, total height: 5,400 mm, Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure. Travel X-axis: 3500 - mm Dimensions (LxWxH) approx.: 8500 x 6500 x 5400 mm Travel Y-axis: 2500 - mm Weight approx.: 45,000 kg Travel Z-axis: 1700 - mm Year of construction: 2,017 Bdsdpfozwtaiox Al Ujg Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Bsdov Aalyepfx Al Uodg Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Bsdpjzuur Ujfx Al Uedg Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition, having never been used. Available now.. Bjdpfx Aoxy Iq Uol Uodg Contact us for further information.

Condition: excellent (used), Year of construction: 2010, grinding length: 330 mm, grinding wheel diameter: 250 mm, total width: 1,765 mm, total length: 1,830 mm, total height: 2,441 mm, grinding diameter: 20 mm, type of input current: three-phase, workpiece diameter between centers: 20 mm, spindle speed (max.): 10,000 rpm, feed length X-axis: 29 mm, feed length Y-axis: 350 mm, feed length Z-axis: 100 mm, feed rate X-axis: 29 m/min, feed rate Y-axis: 350 m/min, feed rate Z-axis: 100 m/min, grinding spindle motor power: 9 W, grinding spindle speed: 7,600 rpm, overall weight: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, input voltage: 400 V, workpiece spindle speed (max.): 3,000 rpm, Equipment: rotational speed infinitely variable, Rollomatic ShapeSmart NP5 — CNC cylindrical grinding machine (pinch/peel) with 3-axis loading robot Year of manufacture 2010 · CNC pinch/peel cylindrical grinding machine · Ø 0.025–20 mm · 3-axis loading robot Five-axis pinch/peel cylindrical grinding machine from Rollomatic SA (Le Landeron, Switzerland) for the rough and finish machining of cutting tools, punches, micro-drills, and forming and ejector pins. The original factory invoice from Rollomatic from 2010 for this machine is available, which documents the design, drives, axis travels, and included equipment. KEY DATA - Grinding diameter Ø 0.025 – 20.0 mm · Shank diameter Ø 1.0 – 20.0 mm · Grinding length max. 330 mm - Control system GE FANUC 320iA, 8 axes (5 machine axes + 3 robot axes), NanoGrind user interface on PC - Roughing spindle 8.5 kW, wheel Ø 250 mm, max. 7,600 min⁻¹ · Finishing spindle 1.4 kW, wheel Ø 150 mm, max. 10,000 min⁻¹ - Workpiece spindle with collet chuck W20, 0 – 3,000 min⁻¹ - Axis travels Y 350 mm · Z 100 mm · X and V each 29 mm with glass scale, resolution 0.00005 mm - Loading robot 3 axes, workpieces Ø 1.0 – 16.0 mm, length 30 – 300 mm, magazine 150 – 1,000 pieces - 1830 × 1765 × 2441 mm · approx. 3,000 kg · 3 × 400 V, 50 Hz, max. 15 kW WHAT MAKES THIS MACHINE SPECIAL - Pinch/peel process: Roughing and finishing wheels engage with the workpiece simultaneously — high accuracy of roundness and short cycle times in one pass SCOPE OF DELIVERY - Machine complete: Machine bed, full splash guard, electrical cabinet, pneumatics unit, control panel with 15" screen and PC keyboard - Control system GE FANUC 320iA with 8 axes, Rollomatic NanoGrind user interface on PC Bjdpozvh Uxefx Al Usdg - P4Smart software for offline programming and simulation - Roughing station with 8.5 kW spindle (90° design) and finishing station with 1.4 kW direct drive spindle, both with PerfectArbor mounting - Monoblock shank guide with pneumatic pressure lever - Workpiece spindle with collet chuck W20 - Integrated three-axis loading robot with base plate for Rollomatic cassettes - Cassettes and collet chucks from the machine's inventory — the exact scope will be listed definitively for the shipping date - Transport-safe packaging on a wooden pallet, loading onto your truck included - Coolant filter and cooling system as well as extraction are not included in the scope of delivery — both were centrally installed at the previous owner - Fire extinguishing system and grinding wheels are not included in the scope of delivery AVAILABILITY AND INSPECTION Availability: End of September 2026, ex warehouse Velten. Demonstration, trial grinding and measurement only after prior appointment — installation and commissioning will be carried out by an external service partner. PROCESSING Location 16727 Velten near Berlin (Germany) · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt · Price on request · All technical data in the attached data sheet. Technical data according to manufacturer's documents (Rollomatic factory invoice from 2010 for this machine and series catalog) — information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB. We will confirm individual values definitively during the inspection or upon specific request. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Bjdpfx Aljzwuras Uodg Automatic lubrication system Coolant system Manual

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Bdodpfxoxgfg To Al Ujg Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: N70089, MACHINE SPECIFICATION Swing over bed 400mm Swing in gap 585mm Swing over cross slide 246mm Distance between centres 1250mm Spindle nose (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Spindle speeds (programmable) 15-2700rpm Tailstock quill taper No. 5 MT Bdedpfx Alozx R Hpo Ujg Approximate nett weight 2200Kg Machine Equipped with Fanuc OiTC CNC Control System Hydraulic 3 jaw chuck 8 Station turret 8 off VDI toolholders Guarding Coolant system Lighting

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. Bdjdpfx Alezizkyo Ueg The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.