Used Matco B.v. Miscellaneous for sale (6,576)

Condition: used, Year of construction: 1986, Format: 0x0 Gjdpfxeyf Iipe Adcebn

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Gbedpfx Asvf E Avodcsn Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 2025, condition: like new (used), Fully automatic pallet wrapper with film pre-stretching Inventory No. 3889 Manufacturer: Matco Type: A 700 Horse * Year of manufacture: 2025 * Design: Horseshoe rotary table * Loading with a pallet truck Gbsdozbddnepfx Adcen * Rotary table positioning via fixed stop * Number of top and bottom wraps * Rotary table diameter: 1650 mm * Max. wrapping height: approx. 2700 mm * Weight: approx. 500 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, fully automatic Matco pallet wrapper including Top Sheetdispencer. 1 x Matco automatic Rotary arm. 1 x Matco top sheetdispencer. 5 x roler conveyor with a total length of approximately 10 meters 1 x Cyclop binding machine. XP112 including: safety light curtains security fans Gbodpfx Adey Uwk Ascen pallet loading position control panel. possible pallet height up til 2400 mm. for more information please get in contact.

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Gedpog Ugbrjfx Adcjbn Flyer at the bottom of this page. Milling trials are possible.

Condition: used, Year of construction: 1991, functionality: fully functional, For Sale – MICROPEEN Scale / Shot Blasting System MICROPEEN MPS 4-200-1S Overhead Rail Shot Blasting System / Scale Removal System with Filter Unit Description For sale is a used MICROPEEN overhead rail shot blasting system / scale removal system, including filter unit, control panel, and workpiece suspensions. This system is ideally suited for: - Scale removal - Cleaning - Rust removal - Surface treatment of steel components - Series and single part processing Workpieces are conveyed into the blasting cabin via an overhead rail system. An integrated extraction and filter unit is also part of the system. The machine comes from an industrial environment and is available immediately. Technical Data Manufacturer: MICROPEEN BENELUX B.V. Model: Sa Year of manufacture: 12/1991 Compressed air: 7 bar Voltage: 380/24 V System type: Overhead Rail Shot Blasting / Scale Removal System Equipment • Blasting cabin • Overhead rail system • Filter unit / extraction • Control panel • Pneumatic system • Workpiece carriers / hooks Gbsdpfxey N Tbmj Adcon Condition • Used • Fully functional condition • Condition as shown in photos • Viewing by appointment possible • Immediately available Price €10,500 net negotiable Location Germany Search terms Shot blasting system, scale removal system, shot blasting machine, overhead rail shot blasting, sand blasting system, surface treatment, MICROPEEN, steel cleaning, shot peening Short version for platforms MICROPEEN MPS 4-200-1S Shot Blasting System Used overhead rail shot blasting system with filter system and control panel. - Year: 1991 - Compressed air: 7 bar - 380/24 V - Complete system - Immediately available Price: €10,500 net negotiable Ideal for descale and cleaning of steel components. Condition as shown in photos.

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Gbodpfx Adswxu A Rocen Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English).

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Opening width: approx. 2.60 m Gbodpfstgpg Iex Adcon incl. CW55 adapter plate (e.g. for CAT 345)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes Gbedpfx Ajri Slmsdcon - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: excellent (used), 1 unit fully automatic pallet wrapper with film pre-stretch Inv. no. 3708 Manufacturer: Matco Type: A 416 - H * Turntable positioning via fixed stop * Number of bottom and top wraps Gsdpfx Ajyb Da Nodcsbn * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2700 mm * Net weight: approx. 500 kg * In very good condition

Condition: excellent (used), 1 unit fully automatic pallet wrapper with film pre-stretch Gsdpfxjyb A Urj Adcebn Inv. no. 3703 Manufacturer: Matco Model: A 718 L-PREA * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1800 mm * Max. wrapping height: approx. 2700 mm * Own weight: approx. 500 kg * For Euro pallets and block pallets!!! * In very good condition

Condition: excellent (used), functionality: fully functional, Dosing/filling line The dosing/filling line consists of: 1. Product pump with inlet hopper Brand Rademaker B.V. Gbsdpfx Aewaty Rodcon Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3, Conveyor belt Brand Meyer Plastic mesh belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional parts.

Condition: ready for operation (used), Year of construction: 1998, Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg. Gbjdjt R Trxopfx Adcon

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Gbsdpfxeuzlg Do Adcsn

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 4601230000, Hosokawa Micron B.V. Flexomix FXD-250 Intensive Mixer / Vertical Mixer – Year of Manufacture: 2021 Manufacturer: Hosokawa Micron B.V., Netherlands Type: FXD-250 (Flexomix) Machine Number: 4601230000 Year of Manufacture: 2021 Condition: Used, good technical condition Availability: Upon agreement Technical Data – General Empty weight: approx. 950 kg Max. bulk density of product: 0.7 – 0.8 kg/l Product area / housing: atmospheric ATEX: not available (N/A) Temperature Ranges Ambient: 0°C to +40°C Storage: -10°C to +60°C Operation: Product area: 0°C to +75°C Housing: 0°C to +65°C Liquid supply: 0°C to +75°C Design: Product area: up to 80°C Housing: up to 70°C Liquid supply: up to 80°C Pressure Design pressure: Product area / housing: atmospheric Liquid: 5 barg Operating pressure: Product area / housing: atmospheric Liquid: 4 barg Nozzle Configuration 1 liquid system 4 nozzle holders (2 nozzles each) 8x standard HMBV nozzles Max. air consumption (nozzles): 120 Nm³/h Power and Media Connections Power supply: 3x 400 V AC / 50 Hz Control: 24 V DC Machine protection rating: IP55 Network type: TN-S Compressed air / nitrogen: 7–8 bar(g), clean, dry, oil-free Max. total air consumption: 149 Nm³/h Nominal current: 27 A Drive Manufacturer: Siemens Type: 1LE1603 Power: 15 kW Speed: 3000 rpm Protection class: IP55 Gjdpfx Ajyn Nhfsdcsbn Frame size: 160M Insulation class: F Note: Operation above 3000 rpm is not permitted according to manufacturer instructions. Bearings Permanently lubricated bearings, re-lubrication not required Foundation Forces Static vertical force: 9500 N Dynamic vertical force: 2100 N Dynamic horizontal force: 300 N Recommended vibration dampers: 4 pieces, Ø 100 mm, height 55 mm, 65° Shore Application The machine was used for mixing: Glass powder + CaCO₃ + water glass Suitable for high-intensity powder-liquid mixing processes. Scope of Delivery: - Complete mixing unit - Siemens main drive - Nozzle system - Documentation in accordance with FAT (sound level included in FAT document) - GA drawing 4601230201 available A viewing appointment can be arranged upon request. Loading can be organized.

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) Gbedozcp D Nspfx Adcon 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: used, Format: 0x0 Gbedpfx Aozcd Nmedcjn

Condition: used, Year of construction: 2008, Format: 160 x 260 mm Net Weight: 182 Gbodpfjzakyajx Adcen Equipment: with a variable head up to 7.5-inch throat depth but with a 6 x 10-inch print area This is a Heavy Duty Machine 182 Kg and a good work table size ideal for most small printers or copy shops going into Hot Foil Printing needing a good strong reliable machine.

Condition: used, Year of construction: 1991, Format: 760 x 440 mm Equipment: Spindles: 4 Drilling diameter: 3 ??? 10 mm Drilling depth: up to approx. 70 mm Spindle spacing: adjustable Gedpey Iz R Hjfx Adcsbn Spindle shaft: ?? 11 mm Hole spacing: min. approx. 3 mm / max. approx. 800 mm Table size: approx. 760 x 440 mm Connection: 380 V Power: approx. 1.5 kW Weight: approx. 90 kg

Condition: used, Year of construction: 1982, Format: 0x0 Equipment: Corner cutter, manual Gsdpfx Adjx Rh Dxscebn

Condition: used, Year of construction: 2010, The Mailmaster 565HS, manufactured by KAS in 2010, is currently in stock and located in Germany. This machine is in good condition with no damages and is configured with FSFi for faster intake, featuring 6 attachment stations. It can handle envelope formats from DL to C5 and operates at a speed of up to 7,000 cycles per hour. The delivery terms are FCA. Gbodovfxqajpfx Adcen Equipment: Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage

Condition: used, The ES 5040 21, manufactured by Italdibipack, is currently in stock and located in Germany. The machine is offered in its current condition as seen. The delivery terms are FCA (Free Carrier), which means the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: Gedevfxq Hopfx Adcjbn Equipment: as is - Brand: Italdibipack- Model: Espert 5040- Year of manufacture: 2008- Motor power: 6.70 HP (5 kW)- Tunnel dimensions: 450 x 230 mm (height)

Condition: used, Year of construction: 1997, Perfecta SHL 12 P pile lift is a machine manufactured by Perfecta in 1997, with a format of 800 x 600 mm. Currently stored in Germany, it has a maximum load capacity of 1000 kg and a maximum dimension of 800 x 600 mm. The delivery terms are FCA. Format: 800 x 600 mm Equipment: Gedpevfxr Refx Adcebn Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm

Condition: used, Year of construction: 2006, The SL 12 P, manufactured by Perfecta in 2006, is currently in stock and located in Germany. This machine has a format of 1,050 x 1,450 mm and features angular boards, a side gauge, and a back panel that allow for manual restacking of the completed material after cutting. It has a maximum carrying capacity of 1,200 kg and a platform size of 1,050 x 1,450 mm. The maximum stroke is 890 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 1.050 x 1.450 mm Gbedpovfx Aijfx Adcon Equipment: Angular boards - Side gauge and back panel allow to manually restack the completed material after cu Carrying capacity max: 1.200 kg Platform size: 1.050 x 1.450 mm Stroke max: 890 mm

Condition: used, Year of construction: 1990, This Polar L-1000-G-3BF is a robust piece of equipment designed for handling heavy loads. Currently dismantled and located in Germany. With a maximum load capacity of 1000 kg and equipped with a pallet lifter, this model is well-suited for various industrial applications. Gbsdpfjvfx Tzjx Adcsn Format: 100x140 cm Equipment: Max. Load capacity: 1000 kg