Used Tbt T 30-750 for sale (84,983)

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Lodpfx Aezu Szysfweaf

Condition: excellent (used), Year of construction: 1985, Drilling depth 750 mm Solid drilling in steel approx. 30 mm Ledpfoy N Ecpox Afweaf Maximum spindle speed 5,700 rpm Clamping table 1280 x 420 mm Cross-slide table Coolant tank Various accessories (drills, bushings)

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm Ledpfxsxzz He Afweaf - Drilling depth: 750 mm - Filter - Pump

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 -Drilling depth 750 / Extension ~1000 -Tank Laodpfxod Ri H Es Afwsf -Pumps -Loading device -Tailstock

Condition: good (used), - Drilling diameter: 5-30 mm - Drilling depth: 750~900 mm - Modifications according to customer requirements Lajdpfx Ao Dcz Dofwef

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Lsdpfx Afszuxp Rswjaf Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Laedeylbrqopfx Afwsf

Condition: refurbished (used), T30-1000 KTN/NC The machine will be completely overhauled and will be like new! Lajdpefgwk Hjfx Afwef The machine gets a completely new electrical system with our control. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Condition: good (used), functionality: fully functional, drilling depth: 1,000 mm, FOR SALE: TBT T 30 – 1000 KT Deep Hole Drilling Machine High-quality German engineering for precision drilling Overview: Available for purchase is a robust and reliable deep hole drilling machine from the renowned German manufacturer TBT Tiefbohrtechnik. As a global leader in deep hole drilling technology, TBT machines provide unmatched precision for long-hole operations. Technical Specifications: Laedpfxjy Rvc Ao Afwof Model: T 30 – 1000 KT Year of Manufacture: 1977 Max Drilling Depth: 1000 mm Drilling Diameter: approx. 4 – 30 mm Rated Power: approx. 20 kW Operating Voltage: 380 V / 50 Hz Machine Type: Knee-table (KT) design for flexible clamping. Key Benefits: Solid Construction: German heavy-duty build ensures superior stability and accuracy. High Performance: The 20 kW motor provides ample power for various metal alloys. Versatile Application: Ideal for drilling shafts, molds, and other long workpieces.

Condition: ready for operation (used), Heidenhain LS 703 ML 620 mm ID: 216 750 0C linear scale SN: 2302669 - cable length: 2 m, used, in good condition, 100% functional, delivery as per photos. Laedpfxjx Er Hgj Afwjf

Condition: excellent (used), mileage: 482,910 km, power: 125 kW (169.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 195/75R16, axle configuration: 6x2, wheelbase: 3,000 mm, fuel: diesel, fuel tank capacity: 80 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,600 kg, permissible axle load (axle 3): 3,990 kg, Year of construction: 2015, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, tail-lift, traction control, Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Axle configuration Brakes: disc brakes Front axle: Tyre size: 195/75R16; Max. axle load: 1900 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle 1: Tyre size: 195/75R16; Max. axle load: 2600 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 2: Tyre size: 225/75R16; Max. axle load: 3990 kg; Tyre profile left inner: 80%; Tyre profile left outer: 70%; Tyre profile right outer: 80%; Tyre profile right outer: 70% Weights Empty weight: 2.100 kg Carrying capacity: 3.040 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA DHLM4, tail lift, 1000 kg Cooling: 30 °C to 30 °C Make of bodywork: CARRIER SUPRA 750 ST 380V Cooling engine: diesel and electric Wall thickness: 6 mm Condition Technical condition: very good Visual appearance: very good Damages: none Laodpeyzb Skofx Afwof Identification Registration number: VN-534-V Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Climate control - Heated door mirrors - Leaf spring suspension - Metallic paint - Multifunctional Steering Wheel - Radio/Cd/Audio system - Side door - Standby 380V - Tachograph - Twin wheel axle = Remarks = VIDEO: Iveco Daily 40C17 3.0D 170 hp Euro 5M 10-ton B/E tractor unit Haldex / Veldhuizen Refrigerated Semi-Trailer 12 pallets Carrier Supra 750 diesel cooling +30C/-30C cools, freezes, and heats Stand-By 380V cools on diesel and electricity Payload 3040 kg (with B/E license) Dhollandia Tail Lift 1000 kg Cooling works great Internal dimensions: L. 6151 mm / W. 2177 mm / H. 2199 mm 12 pallets

Condition: good (used), 30 linear meters of shelving system, Schäfer Type R7000 Used, in good condition, see pictures Height: 2.1 m Depth: 50 cm Load capacity per shelf: 200 kg Field width: approx. 99.8 cm Negotiable price: €3,250 net ex warehouse The offer includes: + 31 uprights/frames, 2.1 m, galvanized + 120 shelves, 200 kg load capacity per shelf, galvanized 4 levels per field (more levels are possible at an extra cost) Various heights up to 12 m available. Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available Ljdpfxsh Eulke Afwjaf • 30–50 semi-trailer truckloads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in broom-clean condition. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, CORMAK TYTAN 220x750P VARIO 230V is a modern universal conventional lathe designed for precision metalworking in workshops, maintenance departments, manufacturing facilities, and training centers. Featuring variable spindle speed control, a powerful 1100 W motor, and a robust cast iron construction, this machine delivers excellent machining accuracy, ease of operation, and consistent repeatability. It is a versatile metal lathe ideally suited for both one-off production and small-batch manufacturing. Key Features Variable spindle speed from 50–2500 RPM allows optimal adjustment of cutting parameters for different materials and machining operations. 1100 W / 230 V motor provides reliable performance even during intensive use. LCD display enables continuous monitoring of spindle speed. Hardened bed guideways ensure long service life and maintain high carriage accuracy. Automatic longitudinal feed improves machining consistency and reduces production time. Metric and imperial threading, including both right-hand and left-hand threads. 38 mm spindle bore accommodates longer workpieces and bar stock. Compact design maximizes workshop space without compromising functionality. Ljdpew H Rauefx Afwoaf Construction and Technology The machine body is manufactured from high-quality cast iron, effectively absorbing vibrations generated during machining. This provides excellent stability and precision, even when machining harder materials. The 100 mm wide bed is equipped with hardened guideways to ensure long-term accuracy and wear resistance. The spindle is mounted on precision tapered roller bearings and features an MT5 spindle taper with a 38 mm through-bore. The electronic variable speed control eliminates the need for frequent belt changes, significantly improving operator efficiency and reducing setup time. Standard Equipment Coolant tray 125 mm 3-jaw chuck Fixed steady rest Follow rest Change gears MT2 and MT4 dead centers Oil can Chip tray Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Note: The lathe is supplied without a stand. Technical Specifications Working Capacity Specification Value Swing over bed 220 mm Swing over cross slide 140 mm Distance between centers 750 mm Bed width 100 mm Headstock Specification Value Spindle bore 38 mm Spindle taper MT5 Spindle speed control Variable Spindle speed range 50–2500 RPM Feed and Thread Cutting Specification Value Metric thread pitches 12 Metric thread range 0.4–3.5 mm Imperial thread pitches 12 Imperial thread range 8–44 TPI Longitudinal feed rate 0.15–0.25 mm/rev Carriage Specification Value Top slide travel 65 mm Cross slide travel 80 mm Longitudinal carriage travel 700 mm Tailstock Specification Value Tailstock quill travel 50 mm Tailstock taper MT2 General Specification Value Main motor 1100 W / 230 V / 50 Hz Maximum tool size 16 mm Length 1260 mm Width 400 mm Height 1300 mm Weight (with stand) 80 kg The machine is supplied without a stand.

Condition: used, MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Ledswpymispfx Afwjaf Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Laodpfew U U N Uox Afwjf Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm Lodpfx Afjwrp Hkswoaf The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Lodsxfgfzepfx Afwoaf

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 27 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 115 rpm, bed width: 135 mm, overall weight: 160 kg, OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA Professional CNC machines, laser systems and metalworking equipment We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe and Asia used by hundreds of companies across Europe. For more than 12 years, we have focused on quality, precision and reliability. TYTAN 750 PREMIUM UNIVERSAL LATHE 0.75 kW / 230V WITH STEADY RESTS The TYTAN 750 universal lathe is a reliable and precise machine designed in a simple and practical way. It is perfectly suitable for home workshops, schools and industrial applications. The machine is equipped with a double prism bed for increased rigidity and machining precision. !!! LATHE STAND NOT INCLUDED !!! !!! MACHINE AVAILABLE FROM STOCK – READY FOR IMMEDIATE SHIPPING !!! TECHNICAL SPECIFICATIONS: • Turning length: 750 mm • Swing diameter: 265 mm • Bed width: 135 mm • Spindle taper: MT4 Lasdpfoyuc T Iex Afwsf • Tailstock taper: MT2 • Chuck diameter: 125 mm • Spindle bore: 27 mm • Metric threads: 0.2–3.5 mm/rev • Inch threads: 8–56 T.P.I. • Spindle speed range: 115–1600 rpm • Motor power: 0.75 kW • Machine weight: 160 kg • Dimensions: 1510 × 570 × 580 mm Standard equipment: • Change gears • Chip guard • 4-way tool post • 3-jaw chuck 125 mm • Chuck guard • Chuck key • Set of jaws • 2 dead centers • Fixed and travelling steady rests (2 times heavier and significantly stronger than in comparable models) • Arbor for drill chuck • Drill chuck NEW FEATURE! Tailstock locking system with quick eccentric clamp. Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity • English operation manual included If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Technical Specifications Turning diameter over bed – 330 mm Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Lodpfxeyvfzqo Afwjaf Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 300 mm, loading space volume: 0.7 m³, suspension: other, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS! Manufacturer: UNITRAILER Product code: UT004047 Model: Garden Trailer 230 Tipping GVWR max.: 750 kg Length of the cargo area: 2304 mm Width of the loading area: 1256 mm Tire type: 155/70 R13 Spare wheel with bracket: optional Wheel location: outside the cargo area Type of suspension: unbraked axle up to 750 kg Number of axles: 1 Side walls: steel Lajdpfx Asir H Sqsfwef Braked: no Side wall height: 300 mm Type of loading area: made of a screen-printed floor panel Tipping mechanism: yes Use: moving, in-house goods transport Unladen weight: 129 kg Total capacity: 620 kg Connector type: 7-pin, option to use a 13 to 7-pin adapter GVWR min.: 300 kg Reversing light: no Trailer UNITRAILER Garden Trailer 230 TIPPING What's new with our latest TIPPING model? Our new model is finally here! The new TIPPING series is characterized by new, improved features: - The new model has not only been equipped with a new hinge structure for the side walls, but also has a new, unique side wall design. - The ribbed surface of the side walls guarantees safe use and no sharp edges. - The lower edge of each side wall has been flattened to improve your safety when loading and unloading your goods. - The new side walls are 30 cm high, which means they are more compact than ever! - We have made this model even more user-friendly. It features design changes such as improved spacing between hooks for tarpaulin cords and an improved folding structure of the drawbar, which greatly reduces the need for a lot of storage space for the trailer. - The frame has also been redesigned, which means that the frame bars are easier to assemble. When you purchase our trailer in a set with a high frame, you will receive more vertical bars, which increases the stability of the entire structure. No more water on the tarpaulin! - This model has been equipped with revolutionary rear wall stops – the safety of the rear wall is thereby improved when the trailer is placed upright. You not only save a lot of space, but also secure the structure of your rear wall. Transport trailer UNITRAILER Garden Trailer 230 is the latest product from UNITRAILER. Currently, this model represents our second-largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate. This allows loading and unloading in just a few minutes. By using a tilting drawbar, the trailer can be placed vertically on the rear wall. We take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specified together with the registration documents within 5 working days. After you receive the trailer, you only need to register it to be able to use it fully. The purchased car trailer will be shipped within 48 hours with the complete set of documents. Buy now online! The car trailer is both tilting and very robust. Shipping from: €129

Condition: used, Year of construction: 2018, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG Laodpeywt N Hefx Afwef - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Lsdpfezuxzasx Afwsaf Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Laodpfxozuxcqs Afwsf Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, 2-AXLE DRACO FRIGO TRAILER, CARRIER TRS ICELAND, 24 CC, TAIL LIFT (2021) Box: Cool/Freeze/Flowers Frigo Martini Ebo Rhoon Make and type of chassis: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: APK: ? 2025 FRC ATP: No Inside dimensions (lxbxh): 750 x 250 x 290 cm Drawbar adjustable length: 40 cm Empty weight: 6,090 kg Loading capacity: 11,910 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre tread depth axle 1: L30%, R30% Tyre tread depth axle 2: L30%, R30% Spare tyre trailer 445/45 30% Extras: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg lift (Year of manufacture 2021!!), ABS, EBS, SAF axles with disc brakes, 2 toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load securing rail, extra lights, rear doors, rear bumper, ferry connections, 2x spare tyres, complete service history available, directly available and ready for work. The box is large enough for 24 CC (Danish trolleys), 14 standard pallets, or 18 Euro pallets, etc. Further information: * Type | Front axle: Continental * Tyre size | Front axle: 445/45 R19.5 Lodpfoztlkrjx Afwjaf * Tyre tread depth inside left | Front axle: 20% * Tyre tread depth inside right | Front axle: 20% * Maximum axle load | Front axle: 9,000 kg * Type | Rear axle: Continental * Tyre size | Rear axle: 445/45 R19.5 * Tyre tread depth inside left | Rear axle: 40% * Tyre tread depth inside right | Rear axle: 40% * Maximum axle load | Rear axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Tail lift | Type: Tilting and sliding tail lift Further equipment: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,292 h, lifting height: 5,150 mm, fuel type: gas, mast type: duplex, power: 39 kW (53.03 HP), total height: 3,300 mm, total length: 2,850 mm, total width: 1,250 mm, color: other, Empty weight: 4.790 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 4th Hydr. circuit - Beacon(s) - Blower - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition Ledpsxvl Dwsfx Afweaf CE type: CE Fork positioner & side shift, Closed cabin with heating, New rear tires